What does Heavyweight Cotton, Print Durability and Micro-Batch Economics conclude, in numbers, about “Stand and Drape: Why the Drape Coefficient Lags Behind Rigidity”?

Answer: Stand follows rigidity, drape follows rigidity relative to weight, and they are two axes. With a quarter more weight, the cube law adds 95 % to rigidity and only about a fifth to the drape coefficient; under the linear law the drape coefficient does not change at all. Hand is multidimensional and cannot be captured by a weight figure. Fabrics twenty grams apart need dozens of instrument strips to be told apart.

Scope of the numbers: Marked boxes separate published evidence, runnable calculations (20 programs), sources and the author's hypotheses, each stating what would refute it.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python only

nGSMG ratioc (cm)DCDC ratio
32401.0002.4000.31981.000
32701.4242.5960.35491.110
33001.9532.7850.38771.212
22401.0002.4000.31981.000
22701.2662.4960.33711.054
23001.5632.5850.35301.104
12401.0002.4000.31981.000
12701.1252.4000.31981.000
13001.2502.4000.31981.000
elasticity over 240 -> 300 GSM:
n = 3: dlnG/dlnW 3.00dlnc/dlnW 0.67dlnDC/dlnW 0.86
n = 2: dlnG/dlnW 2.00dlnc/dlnW 0.33dlnDC/dlnW 0.44
n = 1: dlnG/dlnW 1.00dlnc/dlnW 0.00dlnDC/dlnW 0.00
Show the full program
# Chapter 2. p21: stiffness and drape are two axes, not one.
# Drape is driven by weight against rigidity, so it follows the bending
# length c = (G / W)^(1/3), not G itself (Cusick 1965 found drape
# coefficient regresses on bending length). Illustrative saturating
# curve, not a fitted law: DC = 1 / (1 + (CH / c)^K), CH = 3.5 cm,
# K = 2.0, which puts a 240 GSM jersey near DC 0.32. "Stand" (how far a
# collar or hem resists folding under a fixed hand moment) follows G.
# Elasticities are taken from 240 to 300 GSM on the three routes of p11.
import math

GSM0, C0, CH, K = 240, 2.40, 3.5, 2.0


def drape(c):
    return 1.0 / (1.0 + (CH / c) ** K)


G0 = GSM0 / 10.0 * C0 ** 3
print("n  GSM   G ratio  c (cm)   DC      DC ratio")
rows = {}
for n in (3, 2, 1):
    for gsm in (240, 270, 300):
        g = G0 * (gsm / GSM0) ** n
        c = (g / (gsm / 10.0)) ** (1.0 / 3.0)
        rows[(n, gsm)] = (g / G0, c, drape(c))
        print("%d  %d   %6.3f   %6.3f   %6.4f  %6.3f" % (
            n, gsm, g / G0, c, drape(c), drape(c) / drape(C0)))
lw = math.log(300 / 240)
print("elasticity over 240 -> 300 GSM:")
for n in (3, 2, 1):
    g, c, d = rows[(n, 300)]
    print("  n = %d: dlnG/dlnW %.2f  dlnc/dlnW %.2f  dlnDC/dlnW %.2f" % (
        n, round(math.log(g) / lw, 2) + 0.0,
        round(math.log(c / C0) / lw, 2) + 0.0,
        round(math.log(d / drape(C0)) / lw, 2) + 0.0))

Single source and citation

Fan, Y. (2026). Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics (Version 1.0.0), Chapter 2: Stand and Drape: Why the Drape Coefficient Lags Behind Rigidity. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-337 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026337,
  author    = {Fan, Yafu},
  title     = {Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book