What does Heavyweight Cotton, Print Durability and Micro-Batch Economics conclude, in numbers, about “Reading the Sources: Song Yingxing's "Clothing" and Book I, Chapter III of The Wealth of Nations”?
Answer: On this illustrative curve, a twist multiplier of 2.0 gives a relative strength of only 0.629; at 3.0 it rises to 0.929, the optimum lies near 3.85, and at 4.0 the strength is 0.998. Beyond that it falls: 0.923 at 5.0, 0.804 at 6.0 and only 0.688 at 7.0. Song's sentence holds completely on the left half of the curve and fails on the right half. Twist the yarn too hard and the cloth is not stronger but weaker, and harsher in the hand as well.
Scope of the numbers: Marked boxes separate published evidence, runnable calculations (20 programs), sources and the author's hypotheses, each stating what would refute it.
Data table
The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 0.629, 0.688, 0.804, 0.923, 0.929, 0.998
| twist multiplier | relative strength |
|---|---|
| 2.0 | 0.629 |
| 2.5 | 0.808 |
| 3.0 | 0.929 |
| 3.5 | 0.989 |
| 4.0 | 0.998 |
| 4.5 | 0.971 |
| 5.0 | 0.923 |
| 6.0 | 0.804 |
| 7.0 | 0.688 |
| optimum at 3.85; strength falls on both sides | |
| calendering: thickness kept | rigidity factor (t^3 bound) |
| 1.00 | 1.000 |
| 0.95 | 0.857 |
| 0.90 | 0.729 |
| 0.85 | 0.614 |
Show the full program
# Chapter 7. p71: "tight yarn is strong" holds only up to an optimum.
# Song Yingxing (1637) wrote that tight yarn makes firm cloth and slack
# yarn brittle. Textbook yarn mechanics (Hearle et al. 1969) gives a
# rise-then-fall curve: twist first lets fibres grip each other, then
# tilts them away from the yarn axis. Illustrative shape, not a fitted
# law: strength ~ (1 - exp(-(a / A0)^2)) * cos(atan(GAM * a))^2, a = twist
# multiplier, A0 = 2.6, GAM = 0.16. Second table: calendering (Song's
# rolling stone) thins the cloth; if the modulus is unchanged, rigidity
# scales as thickness cubed, an upper bound on the softening.
import math
A0, GAM = 2.6, 0.16
def strength(a):
grip = 1 - math.exp(-(a / A0) ** 2)
return grip * math.cos(math.atan(GAM * a)) ** 2
grid = [i / 100 for i in range(100, 801)]
best = max(grid, key=strength)
top = strength(best)
print("twist multiplier relative strength")
for a in (2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0):
print(" %.1f %.3f" % (a, strength(a) / top))
print("optimum at %.2f; strength falls on both sides" % best)
print("calendering: thickness kept rigidity factor (t^3 bound)")
for keep in (1.00, 0.95, 0.90, 0.85):
print(" %.2f %.3f" % (keep, keep ** 3))Single source and citation
Fan, Y. (2026). Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics (Version 1.0.0), Chapter 7: Reading the Sources: Song Yingxing's "Clothing" and Book I, Chapter III of The Wealth of Nations. 5D Library. DOI pending
DOI pending · monograph page goes live after publication · 5DL-B-337 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026337,
author = {Fan, Yafu},
title = {Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}Other chapter answers in this book
- Chapter 1 · Areal Density and Bending Rigidity: Peirce's Cantilever and the Limits of the Cube Law
- Chapter 2 · Stand and Drape: Why the Drape Coefficient Lags Behind Rigidity
- Chapter 3 · Shrinkage in Two Stages: Relaxation, Consolidation and the Design of Preshrinking
- Chapter 4 · A Little Damage per Wash: Cumulative Damage and Life Distributions of Heat-Transfer Film
- Chapter 5 · Does a Thicker Film Wash Better? Two Failure Modes and an Interior Optimum in Film Thickness
- Chapter 6 · Does a Bigger Run Make More Money? The Newsvendor Fractile and the Break-Even of Zero Inventory
- Chapter 8 · The Empirical Loop: Batch Records, Pre-Registered Tests and the Distillation Spec