What does Heavyweight Cotton, Print Durability and Micro-Batch Economics conclude, in numbers, about “Areal Density and Bending Rigidity: Peirce's Cantilever and the Limits of the Cube Law”?

Answer: Chapters 1 and 2 use Peirce's cantilever and a numerical elastica to show that a quarter more weight multiplies bending rigidity by between 1.250 and 1.953, so the cube law is only a ceiling, and that stand follows rigidity while drape follows rigidity relative to weight, so the drape coefficient changes far less than rigidity.

Scope of the numbers: Marked boxes separate published evidence, runnable calculations (20 programs), sources and the author's hypotheses, each stating what would refute it.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. printed values that match the answer: 1.250, 1.953

anchor: 240 GSM, c = 2.40 cm, G = 331.8 mg.cm
routeGSMG (mg.cm)G ratioc (cm)c ratio
n = 3240331.81.0002.4001.000
n = 3260421.81.2712.5321.055
n = 3280526.81.5882.6601.108
n = 3300648.01.9532.7851.160
n = 2240331.81.0002.4001.000
n = 2260389.41.1742.4651.027
n = 2280451.61.3612.5271.053
n = 2300518.41.5622.5851.077
n = 1240331.81.0002.4001.000
n = 1260359.41.0832.4001.000
n = 1280387.11.1672.4001.000
n = 1300414.71.2502.4001.000
weight step 240 -> 300 is x1.250
plate law x1.953 in G, only x1.160 in bending length
Show the full program
# Chapter 1. p11: Peirce rigidity G = W c^3 under three scaling routes.
# Peirce (1930): flexural rigidity per unit width G = W * c^3, with W the
# mass per unit area (mg/cm^2) and c the bending length (cm); G is then
# in mg.cm. Anchor (illustrative): a 240 GSM combed jersey with c = 2.40
# cm. If G grows as GSM^n, then c^3 = G / W grows as GSM^(n - 1), so the
# bending length grows only as GSM^((n - 1) / 3). n = 3 is the "thickness
# grows with weight, modulus fixed" plate law; n = 1 is the floor.
# Methods named by number only: ISO 3801 (mass per unit area of woven
# cloth), ASTM D1388 (stiffness of fabrics, cantilever).
GSM0, C0 = 240, 2.40


def rigidity(gsm, c_cm):
    w = gsm / 10.0          # g/m^2 -> mg/cm^2
    return w * c_cm ** 3


G0 = rigidity(GSM0, C0)
print("anchor: %d GSM, c = %.2f cm, G = %.1f mg.cm" % (GSM0, C0, G0))
print("route    GSM   G (mg.cm)  G ratio   c (cm)  c ratio")
for n in (3, 2, 1):
    for gsm in (240, 260, 280, 300):
        ratio = (gsm / GSM0) ** n
        g = G0 * ratio
        c = (g / (gsm / 10.0)) ** (1.0 / 3.0)
        print("n = %d   %4d   %8.1f   %6.3f   %6.3f   %6.3f" % (
            n, gsm, g, ratio, c, c / C0))
print("weight step 240 -> 300 is x%.3f" % (300 / 240))
print("plate law x%.3f in G, only x%.3f in bending length" % (
    (300 / 240) ** 3, (300 / 240) ** (2 / 3)))

Single source and citation

Fan, Y. (2026). Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics (Version 1.0.0), Chapter 1: Areal Density and Bending Rigidity: Peirce's Cantilever and the Limits of the Cube Law. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-337 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026337,
  author    = {Fan, Yafu},
  title     = {Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book