关于「克重与弯曲刚度:皮尔斯悬臂与三次方律的边界」,《重磅棉力学、印花耐洗与小批量经济学》给出的定量结论是什么?
结论:第一、二章用皮尔斯悬臂法与弹性线数值解说明:克重加四分之一时,弯曲刚度的倍数落在 1.250 到 1.953 之间,三次方律只是上界;「挺」看刚度,「垂」看刚度与自重之比,悬垂系数的变化远小于刚度。
数据口径:书中的布料、洗法、成本与需求参数均为示意,全部计算由书中程序生成;本书是非个人化经营建议,耐久结论一律写成条件化、可检验的预测,不作任何绝对化承诺,洗涤与尺寸标准只引编号与适用范围。 第六章用报童模型说明批量决策取决于临界分位而非单价曲线:盈亏临界变异系数随均值需求变化,示意参数下均值 120 件约为 0.593、40 件约为 0.392,为凑价格档做满 250 件的方案单价最低、利润也最低。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 与结论吻合的打印值: 1.250, 1.953
| anchor: 240 GSM, c = 2.40 cm, G = 331.8 mg.cm | |||||
| route | GSM | G (mg.cm) | G ratio | c (cm) | c ratio |
| n = 3 | 240 | 331.8 | 1.000 | 2.400 | 1.000 |
| n = 3 | 260 | 421.8 | 1.271 | 2.532 | 1.055 |
| n = 3 | 280 | 526.8 | 1.588 | 2.660 | 1.108 |
| n = 3 | 300 | 648.0 | 1.953 | 2.785 | 1.160 |
| n = 2 | 240 | 331.8 | 1.000 | 2.400 | 1.000 |
| n = 2 | 260 | 389.4 | 1.174 | 2.465 | 1.027 |
| n = 2 | 280 | 451.6 | 1.361 | 2.527 | 1.053 |
| n = 2 | 300 | 518.4 | 1.562 | 2.585 | 1.077 |
| n = 1 | 240 | 331.8 | 1.000 | 2.400 | 1.000 |
| n = 1 | 260 | 359.4 | 1.083 | 2.400 | 1.000 |
| n = 1 | 280 | 387.1 | 1.167 | 2.400 | 1.000 |
| n = 1 | 300 | 414.7 | 1.250 | 2.400 | 1.000 |
| weight step 240 -> 300 is x1.250 | |||||
| plate law x1.953 in G, only x1.160 in bending length |
查看完整验算程序
# Chapter 1. p11: Peirce rigidity G = W c^3 under three scaling routes.
# Peirce (1930): flexural rigidity per unit width G = W * c^3, with W the
# mass per unit area (mg/cm^2) and c the bending length (cm); G is then
# in mg.cm. Anchor (illustrative): a 240 GSM combed jersey with c = 2.40
# cm. If G grows as GSM^n, then c^3 = G / W grows as GSM^(n - 1), so the
# bending length grows only as GSM^((n - 1) / 3). n = 3 is the "thickness
# grows with weight, modulus fixed" plate law; n = 1 is the floor.
# Methods named by number only: ISO 3801 (mass per unit area of woven
# cloth), ASTM D1388 (stiffness of fabrics, cantilever).
GSM0, C0 = 240, 2.40
def rigidity(gsm, c_cm):
w = gsm / 10.0 # g/m^2 -> mg/cm^2
return w * c_cm ** 3
G0 = rigidity(GSM0, C0)
print("anchor: %d GSM, c = %.2f cm, G = %.1f mg.cm" % (GSM0, C0, G0))
print("route GSM G (mg.cm) G ratio c (cm) c ratio")
for n in (3, 2, 1):
for gsm in (240, 260, 280, 300):
ratio = (gsm / GSM0) ** n
g = G0 * ratio
c = (g / (gsm / 10.0)) ** (1.0 / 3.0)
print("n = %d %4d %8.1f %6.3f %6.3f %6.3f" % (
n, gsm, g, ratio, c, c / C0))
print("weight step 240 -> 300 is x%.3f" % (300 / 240))
print("plate law x%.3f in G, only x%.3f in bending length" % (
(300 / 240) ** 3, (300 / 240) ** (2 / 3)))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《重磅棉织物克重力学、热转印涂层耐洗疲劳与小批量柔性定制经济学母典》第 1 章「克重与弯曲刚度:皮尔斯悬臂与三次方律的边界」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-337 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026337,
author = {Fan, Yafu},
title = {Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}