关于「实证闭环:批次记录、预注册检验与蒸馏规格」,《重磅棉力学、印花耐洗与小批量经济学》给出的定量结论是什么?

结论:第八章给出批次记录、蒸馏小工具「小批量定制盈亏与耐洗试算器」、区间删失的寿命估计与三项预注册检验。书中以标注框区分已发表的证据、可运行的计算(20 段程序)、原典与作者的假说,每条假说都写明什么结果会推翻它。

数据口径:书中的布料、洗法、成本与需求参数均为示意,全部计算由书中程序生成;本书是非个人化经营建议,耐久结论一律写成条件化、可检验的预测,不作任何绝对化承诺,洗涤与尺寸标准只引编号与适用范围。 第六章用报童模型说明批量决策取决于临界分位而非单价曲线:盈亏临界变异系数随均值需求变化,示意参数下均值 120 件约为 0.593、40 件约为 0.392,为凑价格档做满 250 件的方案单价最低、利润也最低。

English version

对照数据表

下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库

fabric297 GSM, c = 2.71 cm, G = 591.1 mg.cm
shrink fit: relaxation 3.95, consolidation 2.83, limit 6.78 %
cut body 76.84 cm for 72 cm after 5 cycles; 71.63 cm at limit
B10 40C inside out, flat33.6 cycles (film 80 um)
B10 40C tumble16.8 cycles (film 80 um)
B10 40C out + tumble11.2 cycles (film 80 um)
bulk: order 61, expected profit 1417.6
on demand: expected profit 1878.0 -> on demand
break-even CV at mean 400.392 (forecast CV 0.8)
label40C or below, inside out, dry flat; B10 forecast 33.6
查看完整验算程序
# Chapter 8. p81: one batch record run through the book's formulas.
# Illustrative record: measured 297 GSM, bending length 2.71 cm; wash
# test (five tumble cycles, ISO 6330 / ISO 5077 procedures named only by
# number): length change 4.4 % after cycle 1, 6.3 % after cycle 5;
# film 80 um; price 89; forecast 40 pieces with CV 0.8 from past designs.
# Steps: Peirce G (p11); two-stage fit with r = 0.10, q = 0.70 fixed
# (p31) and exact pattern cut (p32); B10 by care (p42, p51); bulk versus
# on demand with negative-binomial demand (p62). The distilled tool.py
# prints exactly this sheet when run without arguments.
import math

GSM, CBEND, S1, S5, FILM = 297, 2.71, 4.4, 6.3, 80
PRICE, CB, V, KB, COD, KOD, ALPHA = 89.0, 22.0, 5.0, 400.0, 38.0, 60.0, 0.05
MU, CV, BODY = 40.0, 0.8, 72.0
G = GSM / 10.0 * CBEND ** 3
a1, b1 = 1 - 0.10, 1 - 0.70
a5, b5 = 1 - 0.10 ** 5, 1 - 0.70 ** 5
P = (S5 - S1 * a5 / a1) / (b5 - b1 * a5 / a1)
R = (S1 - P * b1) / a1
cut = BODY / (1 - S5 / 100)
print("fabric: %d GSM, c = %.2f cm, G = %.1f mg.cm" % (GSM, CBEND, G))
print("shrink fit: relaxation %.2f, consolidation %.2f, limit %.2f %%" % (
    R, P, R + P))
print("cut body %.2f cm for %.0f cm after 5 cycles; %.2f cm at limit" % (
    cut, BODY, cut * (1 - (R + P) / 100)))
K10 = (-math.log(0.9)) ** (1 / 2.5)
G_REF, T_REF = 331.8 * 9.81e-6, 0.80e-3       # p51 reference cloth


def added(h_um, g, t):
    h = h_um * 1e-6
    return (30e6 * h ** 3 / 12 + 30e6 * h * (t / 2 + h / 2) ** 2) / g


def b10(h_um, factor):
    d80 = added(80, G_REF, T_REF)
    d = added(h_um, G * 9.81e-6, T_REF * GSM / 240)
    eta_w = 90.0 * (h_um / 80.0) ** 1.5 / factor
    eta_p = 110.0 * (d80 / d) ** 2 / factor
    return (eta_w ** -2.5 + eta_p ** -2.5) ** (-1 / 2.5) * K10


for name, f in (("40C inside out, flat", 1.0), ("40C tumble", 2.0),
                ("40C out + tumble", 3.0)):
    print("B10 %-22s %5.1f cycles (film %d um)" % (name, b10(FILM, f), FILM))


def pmf(mu, cv):
    r = 1.0 / (cv * cv - 1.0 / mu)
    q = r / (r + mu)
    out, pk, k = [], q ** r, 0
    while k < 2 * mu + 50 or pk > 1e-13:
        out.append(pk)
        pk *= (k + r) / (k + 1) * (1 - q)
        k += 1
    return out


def bulk(mu, cv):
    f = pmf(mu, cv)
    cf = (PRICE - CB) / (PRICE - V)
    lo, hi = 0, len(f) - 1
    while lo < hi:
        mid = (lo + hi) // 2
        if math.fsum(f[:mid + 1]) >= cf:
            hi = mid
        else:
            lo = mid + 1
    sold = math.fsum(min(k, lo) * p for k, p in enumerate(f))
    left = math.fsum(max(lo - k, 0) * p for k, p in enumerate(f))
    return lo, PRICE * sold + V * left - CB * lo - KB


q, pb = bulk(MU, CV)
pod = (PRICE - COD) * (1 - ALPHA) * MU - KOD
print("bulk: order %d, expected profit %.1f" % (q, pb))
print("on demand: expected profit %.1f -> %s" % (
    pod, "on demand" if pod > pb else "bulk run"))
lo, hi = 1.0 / math.sqrt(MU) + 1e-6, 3.0
for _ in range(50):
    mid = (lo + hi) / 2
    if bulk(MU, mid)[1] > pod:
        lo = mid
    else:
        hi = mid
print("break-even CV at mean %.0f: %.3f (forecast CV %.1f)" % (
    MU, (lo + hi) / 2, CV))
print("label: 40C or below, inside out, dry flat; B10 forecast %.1f" % (
    b10(FILM, 1.0)))

唯一数据源与引用

范雅福(Fan, Y.). (2026). 《重磅棉织物克重力学、热转印涂层耐洗疲劳与小批量柔性定制经济学母典》第 8 章「实证闭环:批次记录、预注册检验与蒸馏规格」(版本 1.0.0). 5D Library. DOI 待发布

DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-337 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026337,
  author    = {Fan, Yafu},
  title     = {Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

本书其他章节结论