关于「挺与垂:悬垂系数为什么跟不上刚度」,《重磅棉力学、印花耐洗与小批量经济学》给出的定量结论是什么?
结论:挺看刚度,垂看刚度与自重之比,两者是两根轴。克重加 25 % 时,三次方律下刚度加 95 %,悬垂系数只加 21 %;一次方律下悬垂系数完全不变。手感是多维的,一个克重数字代表不了它。二十克之差,仪器要几十条布条才分得开。
数据口径:书中的布料、洗法、成本与需求参数均为示意,全部计算由书中程序生成;本书是非个人化经营建议,耐久结论一律写成条件化、可检验的预测,不作任何绝对化承诺,洗涤与尺寸标准只引编号与适用范围。 第六章用报童模型说明批量决策取决于临界分位而非单价曲线:盈亏临界变异系数随均值需求变化,示意参数下均值 120 件约为 0.593、40 件约为 0.392,为凑价格档做满 250 件的方案单价最低、利润也最低。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库
| n | GSM | G ratio | c (cm) | DC | DC ratio |
|---|---|---|---|---|---|
| 3 | 240 | 1.000 | 2.400 | 0.3198 | 1.000 |
| 3 | 270 | 1.424 | 2.596 | 0.3549 | 1.110 |
| 3 | 300 | 1.953 | 2.785 | 0.3877 | 1.212 |
| 2 | 240 | 1.000 | 2.400 | 0.3198 | 1.000 |
| 2 | 270 | 1.266 | 2.496 | 0.3371 | 1.054 |
| 2 | 300 | 1.563 | 2.585 | 0.3530 | 1.104 |
| 1 | 240 | 1.000 | 2.400 | 0.3198 | 1.000 |
| 1 | 270 | 1.125 | 2.400 | 0.3198 | 1.000 |
| 1 | 300 | 1.250 | 2.400 | 0.3198 | 1.000 |
| elasticity over 240 -> 300 GSM: | |||||
| n = 3: dlnG/dlnW 3.00 | dlnc/dlnW 0.67 | dlnDC/dlnW 0.86 | |||
| n = 2: dlnG/dlnW 2.00 | dlnc/dlnW 0.33 | dlnDC/dlnW 0.44 | |||
| n = 1: dlnG/dlnW 1.00 | dlnc/dlnW 0.00 | dlnDC/dlnW 0.00 |
查看完整验算程序
# Chapter 2. p21: stiffness and drape are two axes, not one.
# Drape is driven by weight against rigidity, so it follows the bending
# length c = (G / W)^(1/3), not G itself (Cusick 1965 found drape
# coefficient regresses on bending length). Illustrative saturating
# curve, not a fitted law: DC = 1 / (1 + (CH / c)^K), CH = 3.5 cm,
# K = 2.0, which puts a 240 GSM jersey near DC 0.32. "Stand" (how far a
# collar or hem resists folding under a fixed hand moment) follows G.
# Elasticities are taken from 240 to 300 GSM on the three routes of p11.
import math
GSM0, C0, CH, K = 240, 2.40, 3.5, 2.0
def drape(c):
return 1.0 / (1.0 + (CH / c) ** K)
G0 = GSM0 / 10.0 * C0 ** 3
print("n GSM G ratio c (cm) DC DC ratio")
rows = {}
for n in (3, 2, 1):
for gsm in (240, 270, 300):
g = G0 * (gsm / GSM0) ** n
c = (g / (gsm / 10.0)) ** (1.0 / 3.0)
rows[(n, gsm)] = (g / G0, c, drape(c))
print("%d %d %6.3f %6.3f %6.4f %6.3f" % (
n, gsm, g / G0, c, drape(c), drape(c) / drape(C0)))
lw = math.log(300 / 240)
print("elasticity over 240 -> 300 GSM:")
for n in (3, 2, 1):
g, c, d = rows[(n, 300)]
print(" n = %d: dlnG/dlnW %.2f dlnc/dlnW %.2f dlnDC/dlnW %.2f" % (
n, round(math.log(g) / lw, 2) + 0.0,
round(math.log(c / C0) / lw, 2) + 0.0,
round(math.log(d / drape(C0)) / lw, 2) + 0.0))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《重磅棉织物克重力学、热转印涂层耐洗疲劳与小批量柔性定制经济学母典》第 2 章「挺与垂:悬垂系数为什么跟不上刚度」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-337 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026337,
author = {Fan, Yafu},
title = {Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}