What does Heavyweight Cotton, Print Durability and Micro-Batch Economics conclude, in numbers, about “A Little Damage per Wash: Cumulative Damage and Life Distributions of Heat-Transfer Film”?

Answer: Chapter 4 describes wash failure of prints with Miner's cumulative damage and Weibull lives; under mixed care, averaging lives overstates the result 2.086 times.

Scope of the numbers: Marked boxes separate published evidence, runnable calculations (20 programs), sources and the author's hypotheses, each stating what would refute it.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 2.086

profile factor life (cycles)
label care 30C0.602 99.6
reference 40C1.000 60.0
40C tumble2.000 30.0
40C out+tumble3.000 20.0
60C out+tumble+heavy9.809 6.1
temperature factor 60C vs 40C2.515
household mix 0.5 / 0.3 / 0.2 of rows 2, 4, 5:
Miner life 17.8 cycles; averaging the lives gives 37.2
overstatement by averaging lives2.086 times
Show the full program
# Chapter 4. p41: wash damage adds up (Miner 1945), lives do not average.
# Reference care: 40 C, inside out, normal action, dried flat; the print's
# characteristic life there is ETA_REF = 60 cycles (illustrative). Each
# condition multiplies the damage per cycle by an acceleration factor:
# temperature in Arrhenius form exp(EA/R (1/T0 - 1/T)) with EA = 40 kJ/mol
# (a schematic value, not a measured activation energy), tumble drying
# x2.0, washing right side out x1.5, heavy action x1.3 (all
# illustrative). Miner: failure when the sum of n_i / N_i reaches 1.
# Laboratory cycles would follow ISO 6330 procedures (named only).
import math

ETA_REF, EA, RGAS, T0 = 60.0, 40000.0, 8.314, 313.15
TUMBLE, OUTSIDE, HEAVY = 2.0, 1.5, 1.3


def af(temp_c, tumble=False, outside=False, heavy=False):
    a = math.exp(EA / RGAS * (1 / T0 - 1 / (temp_c + 273.15)))
    return a * (TUMBLE if tumble else 1) * (OUTSIDE if outside else 1) * \
        (HEAVY if heavy else 1)


PROFILES = [("label care 30C", af(30)), ("reference 40C", af(40)),
            ("40C tumble", af(40, tumble=True)),
            ("40C out+tumble", af(40, True, True)),
            ("60C out+tumble+heavy", af(60, True, True, True))]
print("profile                 factor   life (cycles)")
for name, a in PROFILES:
    print("%-22s  %6.3f   %7.1f" % (name, a, ETA_REF / a))
print("temperature factor 60C vs 40C: %.3f" % af(60))
mix = [(0.5, PROFILES[1][1]), (0.3, PROFILES[3][1]),
       (0.2, PROFILES[4][1])]
dmg = math.fsum(f * a / ETA_REF for f, a in mix)
naive = math.fsum(f * ETA_REF / a for f, a in mix)
print("household mix 0.5 / 0.3 / 0.2 of rows 2, 4, 5:")
print("  Miner life %.1f cycles; averaging the lives gives %.1f" % (
    1 / dmg, naive))
print("  overstatement by averaging lives: %.3f times" % (naive * dmg))

Single source and citation

Fan, Y. (2026). Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics (Version 1.0.0), Chapter 4: A Little Damage per Wash: Cumulative Damage and Life Distributions of Heat-Transfer Film. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-337 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026337,
  author    = {Fan, Yafu},
  title     = {Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book