What does Heavyweight Cotton, Print Durability and Micro-Batch Economics conclude, in numbers, about “Shrinkage in Two Stages: Relaxation, Consolidation and the Design of Preshrinking”?

Answer: Chapter 3 splits shrinkage into relaxation and consolidation (cotton does not felt); under tumble drying the first wash covers only 0.643 of the shrinkage limit, and pattern allowances must divide rather than add.

Scope of the numbers: Marked boxes separate published evidence, runnable calculations (20 programs), sources and the author's hypotheses, each stating what would refute it.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. printed values that match the answer: 0.643

cycleslength tumblelength flatwidth tumblewidth flat
14.503.80-0.45-0.80
25.494.32-0.22-0.81
35.974.48-0.01-0.76
56.504.670.25-0.66
106.924.890.46-0.55
207.004.990.50-0.51
limit7.005.000.50-0.50
length, tumble: cycle 1 shows 0.643 of the limit, cycle 5 0.928
length, flat: cycle 1 shows 0.760 of the limit, cycle 5 0.934
tumble length added between cycle 1 and cycle 5: 2.00 points
Show the full program
# Chapter 3. p31: two-stage dimensional change of a cotton jersey.
# Shrinkage after n wash-and-dry cycles, in per cent (positive = shrink):
#   S(n) = R (1 - r^n) + P (1 - q^n)
# R: relaxation of strain frozen in by knitting and finishing, nearly all
# released in the first cycle (r = 0.10). P: consolidation that keeps
# going cycle after cycle, large under tumble drying, small when the
# garment is dried flat. Cotton has no scales, so there is no felting
# stage; the second stage is consolidation. All parameters illustrative.
# Procedures named by number only: ISO 6330, ISO 5077, AATCC 135.
LENGTH = {"R": 4.0, "r": 0.10, "tumble": (3.0, 0.70), "flat": (1.0, 0.80)}
WIDTH = {"R": -1.0, "r": 0.10, "tumble": (1.5, 0.70), "flat": (0.5, 0.80)}


def shrink(d, dry, n):
    p, q = d[dry]
    return d["R"] * (1 - d["r"] ** n) + p * (1 - q ** n)


def limit(d, dry):
    return d["R"] + d[dry][0]


print("cycles  length tumble  length flat  width tumble  width flat")
for n in (1, 2, 3, 5, 10, 20):
    print("%4d      %6.2f       %6.2f       %6.2f       %6.2f" % (
        n, shrink(LENGTH, "tumble", n), shrink(LENGTH, "flat", n),
        shrink(WIDTH, "tumble", n), shrink(WIDTH, "flat", n)))
print("limit     %6.2f       %6.2f       %6.2f       %6.2f" % (
    limit(LENGTH, "tumble"), limit(LENGTH, "flat"),
    limit(WIDTH, "tumble"), limit(WIDTH, "flat")))
for dry in ("tumble", "flat"):
    a = shrink(LENGTH, dry, 1) / limit(LENGTH, dry)
    b = shrink(LENGTH, dry, 5) / limit(LENGTH, dry)
    print("length, %s: cycle 1 shows %.3f of the limit, cycle 5 %.3f" % (
        dry, a, b))
gap = shrink(LENGTH, "tumble", 5) - shrink(LENGTH, "tumble", 1)
print("tumble length added between cycle 1 and cycle 5: %.2f points" % gap)

Single source and citation

Fan, Y. (2026). Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics (Version 1.0.0), Chapter 3: Shrinkage in Two Stages: Relaxation, Consolidation and the Design of Preshrinking. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-337 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026337,
  author    = {Fan, Yafu},
  title     = {Heavyweight Cotton Areal-Density Mechanics, Heat-Transfer Coating Wash-Cycle Durability and Micro-Batch Custom Apparel Economics},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book