What does Biphasic Light Dose and Thermal Limits conclude, in numbers, about “Pulsed Modulation: Duty Cycle, Average Power and Temperature Swings”?

Answer: Chapter 6 shows that fluence counts only average power, and that two exposures of 144 J/cm² can carry thermal damage integrals 71.72 times apart when one is given in slow pulses.

Scope of the numbers: It writes only physical quantities (irradiance, fluence, temperature rise, duty cycle) and dose ranges reported in published studies; all devices and parameters are illustrative and all calculations are generated by its programs. It is not medical advice and claims no effect of any kind; anyone planning a self-experiment must first consult a licensed physician.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 144, 71.72

fluence in every row144 J/cm^2
mode peak degC Omega Omega / CW
CW40.99 1.462e-03 1.00
T100 s duty 0.50 41.78 1.558e-03 1.07
T100 s duty 0.10 42.49 1.775e-03 1.21
T600 s duty 0.50 45.26 6.795e-03 4.65
T600 s duty 0.25 48.80 3.934e-02 26.91
T 1800 s duty 0.5048.55 1.049e-01 71.72
Show the full program
# Chapter 6. p63: equal fluence, unequal Arrhenius integral.
# A 1800 s session at an average of 80 mW/cm^2 (144 J/cm^2 either way)
# is run continuously or as slow pulses, in the lumped model of p51
# (tau 252 s) with the Arrhenius pair of p41. The temperature path is
# exact piece by piece; the damage integral is Simpson's rule on each
# piece, plus a cooling tail of 3 tau. Because the rate is convex in
# temperature, peaks cost more than troughs save. All illustrative.
import math

T0, ABS, H, TAU = 33.0, 0.5, 0.005, 252.0
A, EA, R = 3.1e98, 6.28e5, 8.314
E_AVG, SESSION = 80.0, 1800.0


def rate(x):
    return A * math.exp(-EA / (R * (T0 + x + 273.15)))


def simpson(f, b, n=200):
    hs = b / n
    terms = [f(0.0), f(b)]
    for i in range(1, n):
        terms.append((4.0 if i % 2 else 2.0) * f(i * hs))
    return math.fsum(terms) * hs / 3.0


def run(period, duty):
    x_on = ABS * E_AVG / duty / 1000.0 / H
    pieces, x, t, tmax = [], 0.0, 0.0, 0.0
    while t < SESSION - 1e-9:
        for level, length in ((x_on, duty * period),
                              (0.0, (1.0 - duty) * period)):
            length = min(length, SESSION - t)
            if length <= 0.0:
                continue
            x0 = x
            pieces.append(simpson(
                lambda s: rate(level + (x0 - level) * math.exp(-s / TAU)),
                length))
            x = level + (x0 - level) * math.exp(-length / TAU)
            tmax = max(tmax, x)
            t += length  # step
    x0 = x
    pieces.append(simpson(lambda s: rate(x0 * math.exp(-s / TAU)),
                          3.0 * TAU))
    return math.fsum(pieces), T0 + tmax


cw, cw_peak = run(SESSION, 1.0)
print("fluence in every row: %.0f J/cm^2" % (E_AVG * SESSION / 1000.0))
print("mode              peak degC   Omega        Omega / CW")
print("CW                %8.2f   %.3e   %9.2f" % (cw_peak, cw, 1.0))
for period, duty in ((100.0, 0.5), (100.0, 0.1), (600.0, 0.5),
                     (600.0, 0.25), (1800.0, 0.5)):
    om, pk = run(period, duty)
    label = "T %4.0f s duty %.2f" % (period, duty)
    print("%-17s %8.2f   %.3e   %9.2f" % (label, pk, om, om / cw))

Single source and citation

Fan, Y. (2026). The Biphasic Dose Window of Photobiomodulation: Arrhenius Thermal Limits and Exposure Times under Pulsed Modulation (Version 1.0.0), Chapter 6: Pulsed Modulation: Duty Cycle, Average Power and Temperature Swings. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-287 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026287,
  author    = {Fan, Yafu},
  title     = {The Biphasic Dose Window of Photobiomodulation: Arrhenius Thermal Limits and Exposure Times under Pulsed Modulation},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book