The Biphasic Dose Window of Photobiomodulation: Arrhenius Thermal Limits and Exposure Times under Pulsed Modulation: chapter answers
The most common claim about red and near-infrared light exposure is that longer is better and brighter is better. This book refutes the two beliefs behind it: that dose and reading are monotonically related, and that equal joules per square centimetre make equal exposures. It writes only physical quantities (irradiance, fluence, temperature rise, duty cycle) and dose ranges reported in published studies; all devices and parameters are illustrative and all calculations are generated by its programs. It is not medical advice and claims no effect of any kind; anyone planning a self-experiment mu…
DOI pending · monograph page goes live after publication · 5DL-B-287 · 中文版
- Chapter 1 · The Biphasic Dose Window: the Mathematical Form of the Arndt–Schulz Curve
Chapter 1 writes a product-form biphasic dose function with a closed-form peak. On illustrative readings built to follow the qualitative order reported in a published review, the monotone model's residual sum of squares… - Chapter 2 · Irradiance Times Time: Converting Fluence, and the Failure of Reciprocity
Chapter 2 converts among power, spot, irradiance and fluence and shows that reciprocity often fails: at the same 3 J/cm², different irradiances give different results, so dose needs two dimensions, irradiance and time. - Chapter 3 · Optical Attenuation in Tissue: the Beer–Lambert Law and the Diffusion Approximation
Chapter 3 computes tissue attenuation with the diffusion approximation; with an illustrative window ratio of 49.5, a surface kept below the upper edge serves depths only to 18.26 mm at 810 nm. - Chapter 4 · The Arrhenius Damage Integral: the Mathematics of a Temperature Boundary
Chapter 4 presents the Arrhenius damage integral: with much-quoted skin parameters as illustration, the threshold takes 24.42 hours at 44 °C and only 60.58 seconds at 54 °C, and at 41 °C it scores 3.50 times the thermal… - Chapter 5 · From Irradiance to Temperature Rise: the Thermal Boundary in the Irradiance and Time Plane
Chapter 5 joins irradiance to temperature rise with a lumped model whose time constant is 252 seconds; for an 1800-second exposure the integral boundary is 74.8 mW/cm². - Chapter 6 · Pulsed Modulation: Duty Cycle, Average Power and Temperature Swings
Chapter 6 shows that fluence counts only average power, and that two exposures of 144 J/cm² can carry thermal damage integrals 71.72 times apart when one is given in slow pulses. - Chapter 7 · East and West in the Sources: "Yang Qi Is Like the Sky and the Sun" and Schulz's Yeast
Chapter 7 examines the Suwen's figure of the sun for yang qi (paraphrased after the received text) and Schulz's yeast experiments of 1888; in an illustrative function the zero-equivalent point lies at 6.3 times the peak… - Chapter 8 · Closing the Loop: a Device Parameter Sheet, the Light Dose Converter and a Pre-registered Test
Chapter 8 gives a device parameter sheet, the distilled Light Dose Converter and a pre-registered test plan for in vitro systems. Marked boxes separate published evidence, runnable Python calculations (18 programs), cla…
Illustrative model calculation, not a live quote