What does Release Kinetics of Herbal Polysaccharides conclude, in numbers, about “The Square Law of Particle Size: Radius, Shape and Sieve Mixtures”?
Answer: The time diffusion needs is proportional to the square of a characteristic length. For a spherical particle the dimensionless times to release a half and nine tenths are 0.03055 and 0.18299, and the time for any radius follows from \(\tau a^2/D\): radius 1.00 mm needs 10.2 and 61.0 minutes, radius 4.00 mm needs 162.9 and 975.9 minutes. A large particle starts by the square-root law, so four times the time gives only 1.944 times the release. A sieve mixture is not a single first-order process: its apparent rate constant falls from 0.0738 to 0.0085, and at minute 120 the polysaccharide still in the particles sits in the two coarsest fractions, 0.558 and 0.389 of it respectively. A slice is far slower than a sphere with the same characteristic length, and equal specific surface guarantees only a similar start. After particle size comes temperature. If temperature, acting through the diffusion coefficient, is worth only about a third more time, what role does it play in a boil? Chapter 3 answers, and shows why hotter sometimes yields less.
Scope of the numbers: The book is not medical advice and claims no effect of any kind; it discusses only physical and chemical quantities such as yields, concentrations, released fractions and diffusion coefficients. Its parameters are illustrative and all calculations are generated by its programs; anyone planning a self-experiment should first consult a licensed physician.
Data table
The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 0.03055, 0.18299, 1.00, 1.944, 10.2, 162.9
| dimensionless: tau50 | 0.03055 tau90 = 0.18299 ratio 5.99 |
| radius(mm) t50(min) t90(min) F at 30 min | |
| 0.25 | 0.6 3.8 1.000 |
| 0.50 | 2.5 15.2 0.983 |
| 1.00 | 10.2 61.0 0.746 |
| 1.50 | 22.9 137.2 0.557 |
| 2.00 | 40.7 244.0 0.440 |
| 3.00 | 91.6 549.0 0.309 |
| 4.00 | 162.9 975.9 0.237 |
| early regime, a | 4.0 mm: |
| t | 5 min F = 0.1008 |
| t | 20 min F = 0.1960 |
| t | 80 min F = 0.3696 |
| F(20)/F(5) | 1.944, close to sqrt(4) = 2 while tau is small |
Show the full program
# Chapter 2. p21: the square law of particle size.
# Times to F = 0.5 and F = 0.9 from Crank's sphere series at 100 C,
# D = 0.003 mm^2/min (示意), for radii from 0.25 mm to 4 mm; and the
# early square-root regime, where four times the time gives only twice
# the release.
import math
D = 0.003
def sphere(tau, nmax=4000):
if tau <= 0.0:
return 0.0
terms = []
for n in range(1, nmax + 1):
e = math.exp(-n * n * math.pi ** 2 * tau) / (n * n)
terms.append(e)
if e < 1e-17:
break
return 1.0 - 6.0 / math.pi ** 2 * math.fsum(terms)
def tau_for(target):
lo, hi = 0.0, 3.0
for _ in range(90):
mid = 0.5 * (lo + hi)
if sphere(mid) < target:
lo = mid
else:
hi = mid
return hi
T50, T90 = tau_for(0.5), tau_for(0.9)
print("dimensionless: tau50 = %.5f tau90 = %.5f ratio %.2f"
% (T50, T90, T90 / T50))
print(" radius(mm) t50(min) t90(min) F at 30 min")
for a in (0.25, 0.5, 1.0, 1.5, 2.0, 3.0, 4.0):
print(" %5.2f %8.1f %8.1f %.3f"
% (a, T50 * a * a / D, T90 * a * a / D, sphere(D * 30 / a ** 2)))
print("early regime, a = 4.0 mm:")
for t in (5, 20, 80):
print(" t = %2d min F = %.4f" % (t, sphere(D * t / 16.0)))
r = sphere(D * 20 / 16.0) / sphere(D * 5 / 16.0)
print("F(20)/F(5) = %.3f, close to sqrt(4) = 2 while tau is small" % r)Single source and citation
Fan, Y. (2026). Fickian Release Kinetics of Herbal Polysaccharides: Extraction Curves for Dendrobium and Isobologram Analysis of Combinations (Version 1.0.0), Chapter 2: The Square Law of Particle Size: Radius, Shape and Sieve Mixtures. 5D Library. DOI pending
DOI pending · monograph page goes live after publication · 5DL-B-289 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026289,
author = {Fan, Yafu},
title = {Fickian Release Kinetics of Herbal Polysaccharides: Extraction Curves for Dendrobium and Isobologram Analysis of Combinations},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}Other chapter answers in this book
- Chapter 1 · First-Order Kinetics and the Sphere Series: Why Boiling Time Is Not Linear
- Chapter 3 · Arrhenius Temperature: Diffusion Racing Chain Scission in the Liquid
- Chapter 4 · A Family of Release Models: Noyes–Whitney, Weibull and What Nine Time Points Can Tell Apart
- Chapter 5 · The Yield Surface: Temperature, Size, Time, Liquid Ratio and the Variance Components of "Daodi"
- Chapter 6 · Isobolograms for Combinations: Loewe Additivity, Sham Combinations and the Mathematical Definition of Synergy
- Chapter 7 · East and West in the Sources: Decoction Rules in the Preface Volume of the *Bencao Gangmu* and Fick's Cylinder and Funnel
- Chapter 8 · Closing the Loop: the Extraction Record Sheet, the Release Curve Calculator and a Pre-Registered Test