What does Release Kinetics of Herbal Polysaccharides conclude, in numbers, about “Closing the Loop: the Extraction Record Sheet, the Release Curve Calculator and a Pre-Registered Test”?

Answer: Chapter 8 gives the extraction record sheet, the Release Curve Calculator and a pre-registered test plan. Marked boxes separate published evidence, runnable Python calculations (21 programs), classical sources and the author's hypotheses.

Scope of the numbers: The book is not medical advice and claims no effect of any kind; it discusses only physical and chemical quantities such as yields, concentrations, released fractions and diffusion coefficients. Its parameters are illustrative and all calculations are generated by its programs; anyone planning a self-experiment should first consult a licensed physician.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python only

Release curve: sphere, size 1.00 mm, 100 C
D0.00300 mm^2/min kd = 0.00200 per min Y_eq = 0.1500 g/g
t(min) F yield g/g gain next 10 min
100.496 0.0734 +0.0212
200.649 0.0946 +0.0124
300.746 0.1071 +0.0078
450.839 0.1177 +0.0038
600.897 0.1228 +0.0015
900.958 0.1244 -0.0009
1200.983 0.1208 -0.0017
1800.997 0.1091 -0.0020
t5010.2 min t90 = 61.0 min
highest yield on a 5 min grid80 min, 0.1247 g/g
one kelvin more2.6 % more time; 10 % finer = 23.5 %
Weibull beta on a 5-120 min lab schedule0.641 (7 points)
Record per batch: origin, lot, sieve, water mL/g, temp, minutes,
assay g/g with method and replicate. Illustrative parameters;
physical quantities only; not medical advice.
Show the full program
# Chapter 8. p81: the release-curve record sheet (demo of distill/tool.py).
# Same functions as the Release Curve Calculator: Crank sphere and sheet
# series (p12, p23), Arrhenius D and loss rate (p31, p32), convolution
# with first-order loss (p51), Weibull exponent on a lab schedule (p42).
# Defaults are illustrative (示意): sphere radius 1.0 mm, 100 C, D100 =
# 0.003 mm^2/min, Ea 30 kJ/mol, kd100 0.002 per min, Ea_d 90 kJ/mol,
# m0 0.18 g/g, water 10 mL/g, partition capacity 2 mL/g.
import math

RGAS = 8.314


def sphere(tau, nmax=4000):
    # Crank 球形颗粒级数:F = 1 - 6/pi^2 * sum exp(-n^2 pi^2 tau) / n^2
    if tau <= 0.0:
        return 0.0
    terms = []
    for n in range(1, nmax + 1):
        e = math.exp(-n * n * math.pi ** 2 * tau) / (n * n)
        terms.append(e)
        if e < 1e-17:
            break
    return 1.0 - 6.0 / math.pi ** 2 * math.fsum(terms)


def sheet(tau, nmax=4000):
    # Crank 平板(饮片)级数,半厚 l,两面开放
    if tau <= 0.0:
        return 0.0
    terms = []
    for n in range(nmax):
        m = 2 * n + 1
        e = 8.0 / (m * m * math.pi ** 2) * math.exp(
            -m * m * math.pi ** 2 * tau / 4.0)
        terms.append(e)
        if e < 1e-17:
            break
    return 1.0 - math.fsum(terms)


def arr(v100, ea_j, tc):
    # Arrhenius:以 100 C 为参考温度
    return v100 * math.exp(-ea_j / RGAS * (1.0 / (tc + 273.15)
                                           - 1.0 / 373.15))


class Curve:
    def __init__(self, shape="sphere", size=1.0, temp=100.0, d100=0.003,
                 ea=30.0, kd100=0.002, ead=90.0, m0=0.18, ratio=10.0,
                 kcap=2.0):
        self.fn = sphere if shape == "sphere" else sheet
        self.shape, self.size, self.temp = shape, size, temp
        self.d = arr(d100, ea * 1000.0, temp)
        self.kd = arr(kd100, ead * 1000.0, temp)
        self.ea = ea * 1000.0
        self.y_eq = m0 * ratio / (ratio + kcap)

    def frac(self, t):
        return self.fn(self.d * t / self.size ** 2)

    def yld(self, t, steps=400):
        # 溶出与液相一级损失的卷积(p32、p51)
        if t <= 0.0:
            return 0.0
        h = t / steps
        parts, prev = [], 0.0
        for i in range(1, steps + 1):
            f = self.frac(i * h)
            parts.append((f - prev) * math.exp(-self.kd * (t - (i - 0.5)
                                                           * h)))
            prev = f
        return self.y_eq * math.fsum(parts)

    def time_to(self, target):
        lo, hi = 0.0, 1e6
        for _ in range(100):
            mid = 0.5 * (lo + hi)
            if self.frac(mid) < target:
                lo = mid
            else:
                hi = mid
        return hi

    def best_time(self, tmax=360):
        best_t, best_y = 5, self.yld(5.0)
        for t in range(10, tmax + 1, 5):
            y = self.yld(float(t))
            if y > best_y:
                best_t, best_y = t, y
        return best_t, best_y

    def kelvin_worth(self):
        tk = self.temp + 273.15
        return 100.0 * (math.exp(self.ea / RGAS * (1.0 / tk
                                                   - 1.0 / (tk + 1.0)))
                        - 1.0)

    def weibull_beta(self, lab=(5, 10, 15, 20, 30, 45, 60, 90, 120)):
        pts = [(math.log(t), math.log(-math.log(1.0 - self.frac(t))))
               for t in lab if 0.05 <= self.frac(t) <= 0.95]
        if len(pts) < 3:
            return None, len(pts)
        mx = math.fsum(x for x, _ in pts) / len(pts)
        my = math.fsum(y for _, y in pts) / len(pts)
        b = math.fsum((x - mx) * (y - my) for x, y in pts) / \
            math.fsum((x - mx) ** 2 for x, _ in pts)
        return b, len(pts)


def report(c, times):
    rows = []
    for t in times:
        rows.append({"t_min": t, "F": c.frac(t), "yield": c.yld(t),
                     "gain_next_10": c.yld(t + 10.0) - c.yld(t)})
    bt, by = c.best_time()
    beta, npts = c.weibull_beta()
    return {"shape": c.shape, "size_mm": c.size, "temp_C": c.temp,
            "D_mm2_per_min": c.d, "kd_per_min": c.kd, "Y_eq": c.y_eq,
            "rows": rows, "t50_min": c.time_to(0.5),
            "t90_min": c.time_to(0.9), "best_time_min": bt,
            "best_yield": by, "one_kelvin_pct_time": c.kelvin_worth(),
            "grind_10pct_finer_pct_time": 100.0 * (1.0 / 0.81 - 1.0),
            "weibull_beta_lab": beta, "weibull_points": npts,
            "note": "illustrative; physical quantities only; "
                    "not medical advice"}


def print_text(r):
    print("Release curve: %s, size %.2f mm, %.0f C"
          % (r["shape"], r["size_mm"], r["temp_C"]))
    print("D = %.5f mm^2/min  kd = %.5f per min  Y_eq = %.4f g/g"
          % (r["D_mm2_per_min"], r["kd_per_min"], r["Y_eq"]))
    print(" t(min)   F      yield g/g   gain next 10 min")
    for row in r["rows"]:
        print("%6.0f   %.3f   %.4f      %+.4f"
              % (row["t_min"], row["F"], row["yield"],
                 row["gain_next_10"]))
    print("t50 = %.1f min   t90 = %.1f min"
          % (r["t50_min"], r["t90_min"]))
    print("highest yield on a 5 min grid: %d min, %.4f g/g"
          % (r["best_time_min"], r["best_yield"]))
    print("one kelvin more = %.1f %% more time; 10 %% finer = %.1f %%"
          % (r["one_kelvin_pct_time"], r["grind_10pct_finer_pct_time"]))
    if r["weibull_beta_lab"] is not None:
        print("Weibull beta on a 5-120 min lab schedule: %.3f (%d points)"
              % (r["weibull_beta_lab"], r["weibull_points"]))
    print("Record per batch: origin, lot, sieve, water mL/g, temp, minutes,")
    print("assay g/g with method and replicate. Illustrative parameters;")
    print("physical quantities only; not medical advice.")


print_text(report(Curve(), [10.0, 20.0, 30.0, 45.0, 60.0, 90.0, 120.0,
                            180.0]))

Single source and citation

Fan, Y. (2026). Fickian Release Kinetics of Herbal Polysaccharides: Extraction Curves for Dendrobium and Isobologram Analysis of Combinations (Version 1.0.0), Chapter 8: Closing the Loop: the Extraction Record Sheet, the Release Curve Calculator and a Pre-Registered Test. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-289 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026289,
  author    = {Fan, Yafu},
  title     = {Fickian Release Kinetics of Herbal Polysaccharides: Extraction Curves for Dendrobium and Isobologram Analysis of Combinations},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book