What does Release Kinetics of Herbal Polysaccharides conclude, in numbers, about “Arrhenius Temperature: Diffusion Racing Chain Scission in the Liquid”?
Answer: Temperature acts through two races. The diffusion coefficient rises with temperature by the Arrhenius relation: with the illustrative activation energy it is multiplied by 1.305 from 90 to 100 degrees, more sensitive than the 1.147 inferred from the viscosity of water, and the diffusion progress of 60 minutes at 100 degrees takes 103.8 minutes at 80 degrees. Scission in the liquid has a higher activation energy, so the hotter the liquid, the earlier and lower the peak of the measured amount: under the first-order model, the peak at 80 degrees comes at 226.5 minutes with 0.137, and at 120 degrees at 43.1 minutes with 0.103. After a full 240 minutes, 0.137 remains at 80 degrees and only 0.021 at 120. We have now used three curves: first-order kinetics, the sphere series and a convolution with loss. Given nine measured time points in a laboratory, which one should be fitted, and can they be told apart at all? Chapter 4 takes up the question.
Scope of the numbers: The book is not medical advice and claims no effect of any kind; it discusses only physical and chemical quantities such as yields, concentrations, released fractions and diffusion coefficients. Its parameters are illustrative and all calculations are generated by its programs; anyone planning a self-experiment should first consult a licensed physician.
Data table
The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 0.021, 0.103, 0.137, 100, 120, 226.5
| T(C) | k1 | kd | t*(min) peak | sphere peak at | Y(240) | |
| 80 | 0.0171 | 0.00039 | 226.5 | 0.137 | 200 min 0.138 | 0.137 |
| 90 | 0.0227 | 0.00090 | 148.1 | 0.131 | 130 min 0.132 | 0.124 |
| 100 | 0.0296 | 0.00200 | 97.6 | 0.123 | 80 min 0.125 | 0.097 |
| 110 | 0.0381 | 0.00426 | 64.7 | 0.114 | 50 min 0.116 | 0.058 |
| 120 | 0.0484 | 0.00875 | 43.1 | 0.103 | 30 min 0.106 | 0.021 |
| columns peak, sphere peak and Y(240) are g/g; peaks on a 10 min grid |
Show the full program
# Chapter 3. p32: extraction against thermal degradation.
# Polysaccharide leaves the particle (rate set by diffusion) and, once
# in hot liquid, loses measured mass by chain scission at first-order
# rate kd(T). First-order picture: A -> B -> C with k1 = pi^2 D / a^2;
# B peaks at t* = ln(k1/kd) / (k1 - kd). The sphere picture convolves
# Crank's release with exp(-kd (t - s)). Illustrative (示意): D100 =
# 0.003 mm^2/min, Ea = 30 kJ/mol; kd100 = 0.002 per min, Ea_d = 90
# kJ/mol; radius 1.0 mm; Y_eq = 0.150 g/g.
import math
D100, EA, KD100, EAD, RGAS, Y_EQ = 0.003, 30000.0, 0.002, 90000.0, \
8.314, 0.150
def arr(v100, ea, tc):
return v100 * math.exp(-ea / RGAS * (1.0 / (tc + 273.15)
- 1.0 / 373.15))
def sphere(tau, nmax=4000):
if tau <= 0.0:
return 0.0
terms = []
for n in range(1, nmax + 1):
e = math.exp(-n * n * math.pi ** 2 * tau) / (n * n)
terms.append(e)
if e < 1e-17:
break
return 1.0 - 6.0 / math.pi ** 2 * math.fsum(terms)
def conv(d, kd, t, steps=600):
h = t / steps
parts = []
prev = 0.0
for i in range(1, steps + 1):
f = sphere(d * i * h)
parts.append((f - prev) * math.exp(-kd * (t - (i - 0.5) * h)))
prev = f
return math.fsum(parts)
print(" T(C) k1 kd t*(min) peak sphere peak at Y(240)")
for tc in (80, 90, 100, 110, 120):
d = arr(D100, EA, tc)
kd = arr(KD100, EAD, tc)
k1 = math.pi ** 2 * d
ts = math.log(k1 / kd) / (k1 - kd)
peak = k1 / (k1 - kd) * (math.exp(-kd * ts) - math.exp(-k1 * ts))
best_t, best_y = 0, 0.0
for t in range(10, 361, 10):
y = conv(d, kd, t)
if y > best_y:
best_t, best_y = t, y
print("%5d %.4f %.5f %6.1f %.3f %3d min %.3f %.3f"
% (tc, k1, kd, ts, Y_EQ * peak, best_t, Y_EQ * best_y,
Y_EQ * conv(d, kd, 240.0)))
print("columns peak, sphere peak and Y(240) are g/g; peaks on a 10 min grid")Single source and citation
Fan, Y. (2026). Fickian Release Kinetics of Herbal Polysaccharides: Extraction Curves for Dendrobium and Isobologram Analysis of Combinations (Version 1.0.0), Chapter 3: Arrhenius Temperature: Diffusion Racing Chain Scission in the Liquid. 5D Library. DOI pending
DOI pending · monograph page goes live after publication · 5DL-B-289 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026289,
author = {Fan, Yafu},
title = {Fickian Release Kinetics of Herbal Polysaccharides: Extraction Curves for Dendrobium and Isobologram Analysis of Combinations},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}Other chapter answers in this book
- Chapter 1 · First-Order Kinetics and the Sphere Series: Why Boiling Time Is Not Linear
- Chapter 2 · The Square Law of Particle Size: Radius, Shape and Sieve Mixtures
- Chapter 4 · A Family of Release Models: Noyes–Whitney, Weibull and What Nine Time Points Can Tell Apart
- Chapter 5 · The Yield Surface: Temperature, Size, Time, Liquid Ratio and the Variance Components of "Daodi"
- Chapter 6 · Isobolograms for Combinations: Loewe Additivity, Sham Combinations and the Mathematical Definition of Synergy
- Chapter 7 · East and West in the Sources: Decoction Rules in the Preface Volume of the *Bencao Gangmu* and Fick's Cylinder and Funnel
- Chapter 8 · Closing the Loop: the Extraction Record Sheet, the Release Curve Calculator and a Pre-Registered Test