What does Release Kinetics of Herbal Polysaccharides conclude, in numbers, about “First-Order Kinetics and the Sphere Series: Why Boiling Time Is Not Linear”?

Answer: Chapter 1 shows that with illustrative parameters, going from 30 to 60 minutes multiplies the yield by 1.411 and going from 60 to 120 minutes by only 1.169; at a baseline of 90 degrees, radius 1.5 mm and 30 minutes, doubling the time raises the released fraction by 0.154, ten degrees more by only 0.056, and halving the radius by 0.317.

Scope of the numbers: The book is not medical advice and claims no effect of any kind; it discusses only physical and chemical quantities such as yields, concentrations, released fractions and diffusion coefficients. Its parameters are illustrative and all calculations are generated by its programs; anyone planning a self-experiment should first consult a licensed physician.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 0.056, 0.154, 0.317, 1.5, 120, 30

baseline 90 C, a1.5 mm, 30 min: F = 0.501 yield 0.0751 g/g
lever F gain vs base equivalent time factor
time x2 (60 min)0.654 +0.154 2.00
+10 C (100 C)0.557 +0.056 1.31
radius /2 (0.75 mm)0.818 +0.317 4.00
time x4 (120 min)0.818 +0.317 4.00
elasticity of F: time 0.408 radius -0.816 per kelvin 0.0112
one kelvin is worth 2.8 % more time; 1 % less radius 2.0 %
at 240 min: base 0.946, hotter and finer 1.000 (both near F1)

Key formula

\[F(\tau) = 1 - \frac{6}{\pi^2}\sum_{n=1}^{\infty}\frac{1}{n^2}e^{-n^2\pi^2\tau},\qquad \tau = Dt/a^2 .\]
Show the full program
# Chapter 1. p13: time, temperature and particle size as three levers.
# In pure diffusion F depends on tau = D(T) t / a^2 only, so time and
# D enter as a product and radius enters squared. D(T) follows
# Arrhenius: D = D100 * exp(-Ea/R * (1/T - 1/373.15)).
# Illustrative (示意): D100 = 0.003 mm^2/min, Ea = 30 kJ/mol,
# baseline 90 C, radius 1.5 mm, 30 min; Y_eq = 0.150 g/g.
import math

D100, EA, RGAS, Y_EQ = 0.003, 30000.0, 8.314, 0.150


def sphere(tau, nmax=4000):
    if tau <= 0.0:
        return 0.0
    terms = []
    for n in range(1, nmax + 1):
        e = math.exp(-n * n * math.pi ** 2 * tau) / (n * n)
        terms.append(e)
        if e < 1e-17:
            break
    return 1.0 - 6.0 / math.pi ** 2 * math.fsum(terms)


def dcoef(tc):
    tk = tc + 273.15
    return D100 * math.exp(-EA / RGAS * (1.0 / tk - 1.0 / 373.15))


def frac(tc, a, t):
    return sphere(dcoef(tc) * t / a ** 2)


base = (90.0, 1.5, 30.0)
f0 = frac(*base)
print("baseline 90 C, a = 1.5 mm, 30 min: F = %.3f  yield %.4f g/g"
      % (f0, Y_EQ * f0))
cases = [("time x2 (60 min)", (90.0, 1.5, 60.0)),
         ("+10 C (100 C)", (100.0, 1.5, 30.0)),
         ("radius /2 (0.75 mm)", (90.0, 0.75, 30.0)),
         ("time x4 (120 min)", (90.0, 1.5, 120.0))]
print("lever                  F      gain vs base  equivalent time factor")
for name, c in cases:
    f = frac(*c)
    eq = dcoef(c[0]) * c[2] / c[1] ** 2 / (dcoef(90.0) * 30.0 / 1.5 ** 2)
    print("%-20s  %.3f   %+.3f         %.2f" % (name, f, f - f0, eq))
h = 1e-4
tau0 = dcoef(90.0) * 30.0 / 1.5 ** 2
el_t = (math.log(sphere(tau0 * (1 + h))) - math.log(sphere(
    tau0 * (1 - h)))) / (2 * h)
tk = 363.15
print("elasticity of F: time %.3f  radius %.3f  per kelvin %.4f"
      % (el_t, -2.0 * el_t, el_t * EA / (RGAS * tk ** 2)))
print("one kelvin is worth %.1f %% more time; 1 %% less radius %.1f %%"
      % (100.0 * (math.exp(EA / RGAS * (1 / 363.15 - 1 / 364.15)) - 1),
         100.0 * (1.0 / 0.99 ** 2 - 1)))
f_long = frac(90.0, 1.5, 240.0)
f_long2 = frac(100.0, 0.75, 240.0)
print("at 240 min: base %.3f, hotter and finer %.3f (both near F = 1)"
      % (f_long, f_long2))

Single source and citation

Fan, Y. (2026). Fickian Release Kinetics of Herbal Polysaccharides: Extraction Curves for Dendrobium and Isobologram Analysis of Combinations (Version 1.0.0), Chapter 1: First-Order Kinetics and the Sphere Series: Why Boiling Time Is Not Linear. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-289 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026289,
  author    = {Fan, Yafu},
  title     = {Fickian Release Kinetics of Herbal Polysaccharides: Extraction Curves for Dendrobium and Isobologram Analysis of Combinations},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book