关于「一级动力学与球形级数:煎煮时间为什么不线性」,《草本多糖溶出动力学》给出的定量结论是什么?
结论:第一章显示,示意参数下 30 分钟延长到 60 分钟得率乘以 1.411,60 分钟延长到 120 分钟只乘以 1.169;在 90 度、半径 1.5 毫米、30 分钟的基线上,时间加倍使溶出分数增加 0.154,升温十度只增加 0.056,半径减半增加 0.317。
数据口径:本书非医疗建议,不宣称任何功效,只讨论得率、浓度、溶出分数与扩散系数这些物理化学量;书中参数为示意,全部计算由书中程序生成;自我试验前应先咨询执业医师。 第一章显示,示意参数下 30 分钟延长到 60 分钟得率乘以 1.411,60 分钟延长到 120 分钟只乘以 1.169;在 90 度、半径 1.5 毫米、30 分钟的基线上,时间加倍使溶出分数增加 0.154,升温十度只增加 0.056,半径减半增加 0.317。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 0.056, 0.154, 0.317, 1.5, 120, 30
| baseline 90 C, a | 1.5 mm, 30 min: F = 0.501 yield 0.0751 g/g |
| lever F gain vs base equivalent time factor | |
| time x2 (60 min) | 0.654 +0.154 2.00 |
| +10 C (100 C) | 0.557 +0.056 1.31 |
| radius /2 (0.75 mm) | 0.818 +0.317 4.00 |
| time x4 (120 min) | 0.818 +0.317 4.00 |
| elasticity of F: time 0.408 radius -0.816 per kelvin 0.0112 | |
| one kelvin is worth 2.8 % more time; 1 % less radius 2.0 % | |
| at 240 min: base 0.946, hotter and finer 1.000 (both near F | 1) |
核心公式
\[F(\tau) = 1 - \frac{6}{\pi^2}\sum_{n=1}^{\infty}\frac{1}{n^2}e^{-n^2\pi^2\tau},\qquad \tau = Dt/a^2 .\]
查看完整验算程序
# Chapter 1. p13: time, temperature and particle size as three levers.
# In pure diffusion F depends on tau = D(T) t / a^2 only, so time and
# D enter as a product and radius enters squared. D(T) follows
# Arrhenius: D = D100 * exp(-Ea/R * (1/T - 1/373.15)).
# Illustrative (示意): D100 = 0.003 mm^2/min, Ea = 30 kJ/mol,
# baseline 90 C, radius 1.5 mm, 30 min; Y_eq = 0.150 g/g.
import math
D100, EA, RGAS, Y_EQ = 0.003, 30000.0, 8.314, 0.150
def sphere(tau, nmax=4000):
if tau <= 0.0:
return 0.0
terms = []
for n in range(1, nmax + 1):
e = math.exp(-n * n * math.pi ** 2 * tau) / (n * n)
terms.append(e)
if e < 1e-17:
break
return 1.0 - 6.0 / math.pi ** 2 * math.fsum(terms)
def dcoef(tc):
tk = tc + 273.15
return D100 * math.exp(-EA / RGAS * (1.0 / tk - 1.0 / 373.15))
def frac(tc, a, t):
return sphere(dcoef(tc) * t / a ** 2)
base = (90.0, 1.5, 30.0)
f0 = frac(*base)
print("baseline 90 C, a = 1.5 mm, 30 min: F = %.3f yield %.4f g/g"
% (f0, Y_EQ * f0))
cases = [("time x2 (60 min)", (90.0, 1.5, 60.0)),
("+10 C (100 C)", (100.0, 1.5, 30.0)),
("radius /2 (0.75 mm)", (90.0, 0.75, 30.0)),
("time x4 (120 min)", (90.0, 1.5, 120.0))]
print("lever F gain vs base equivalent time factor")
for name, c in cases:
f = frac(*c)
eq = dcoef(c[0]) * c[2] / c[1] ** 2 / (dcoef(90.0) * 30.0 / 1.5 ** 2)
print("%-20s %.3f %+.3f %.2f" % (name, f, f - f0, eq))
h = 1e-4
tau0 = dcoef(90.0) * 30.0 / 1.5 ** 2
el_t = (math.log(sphere(tau0 * (1 + h))) - math.log(sphere(
tau0 * (1 - h)))) / (2 * h)
tk = 363.15
print("elasticity of F: time %.3f radius %.3f per kelvin %.4f"
% (el_t, -2.0 * el_t, el_t * EA / (RGAS * tk ** 2)))
print("one kelvin is worth %.1f %% more time; 1 %% less radius %.1f %%"
% (100.0 * (math.exp(EA / RGAS * (1 / 363.15 - 1 / 364.15)) - 1),
100.0 * (1.0 / 0.99 ** 2 - 1)))
f_long = frac(90.0, 1.5, 240.0)
f_long2 = frac(100.0, 0.75, 240.0)
print("at 240 min: base %.3f, hotter and finer %.3f (both near F = 1)"
% (f_long, f_long2))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《草本活性多糖菲克扩散溶出动力学、道地石斛提取曲线与复方等效线图协同母典》第 1 章「一级动力学与球形级数:煎煮时间为什么不线性」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-289 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026289,
author = {Fan, Yafu},
title = {Fickian Release Kinetics of Herbal Polysaccharides: Extraction Curves for Dendrobium and Isobologram Analysis of Combinations},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}