关于「粒径的平方律:半径、形状与筛分混合物」,《草本多糖溶出动力学》给出的定量结论是什么?

结论:扩散所需的时间与特征长度的平方成正比。对球形颗粒,释放一半与九成的无量纲时间分别是 0.03055 与 0.18299,任何半径下的时间都可以按 \(\tau a^2/D\) 换算:半径 1.00 毫米需 10.2 与 61.0 分钟,半径 4.00 毫米需 162.9 与 975.9 分钟。大颗粒的开头遵循平方根律,时间乘以四,释放只乘以 1.944。筛分混合物不是一个一级过程:表观速率常数从 0.0738 降到 0.0085,第 120 分钟剩余的多糖有 0.558 与 0.389 分别留在最粗的两档里。切片比同样特征长度的球慢得多,比表面积相同也只保证开头相似。粒径之后是温度:既然温度通过扩散系数只值三成的时间,它在煎煮里到底扮演什么角色?第三章给出答案,并说明为什么更热有时得到更少。

数据口径:本书非医疗建议,不宣称任何功效,只讨论得率、浓度、溶出分数与扩散系数这些物理化学量;书中参数为示意,全部计算由书中程序生成;自我试验前应先咨询执业医师。 第一章显示,示意参数下 30 分钟延长到 60 分钟得率乘以 1.411,60 分钟延长到 120 分钟只乘以 1.169;在 90 度、半径 1.5 毫米、30 分钟的基线上,时间加倍使溶出分数增加 0.154,升温十度只增加 0.056,半径减半增加 0.317。

English version

对照数据表

下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 0.03055, 0.18299, 1.00, 1.944, 10.2, 162.9

dimensionless: tau500.03055 tau90 = 0.18299 ratio 5.99
radius(mm) t50(min) t90(min) F at 30 min
0.250.6 3.8 1.000
0.502.5 15.2 0.983
1.0010.2 61.0 0.746
1.5022.9 137.2 0.557
2.0040.7 244.0 0.440
3.0091.6 549.0 0.309
4.00162.9 975.9 0.237
early regime, a4.0 mm:
t5 min F = 0.1008
t20 min F = 0.1960
t80 min F = 0.3696
F(20)/F(5)1.944, close to sqrt(4) = 2 while tau is small
查看完整验算程序
# Chapter 2. p21: the square law of particle size.
# Times to F = 0.5 and F = 0.9 from Crank's sphere series at 100 C,
# D = 0.003 mm^2/min (示意), for radii from 0.25 mm to 4 mm; and the
# early square-root regime, where four times the time gives only twice
# the release.
import math

D = 0.003


def sphere(tau, nmax=4000):
    if tau <= 0.0:
        return 0.0
    terms = []
    for n in range(1, nmax + 1):
        e = math.exp(-n * n * math.pi ** 2 * tau) / (n * n)
        terms.append(e)
        if e < 1e-17:
            break
    return 1.0 - 6.0 / math.pi ** 2 * math.fsum(terms)


def tau_for(target):
    lo, hi = 0.0, 3.0
    for _ in range(90):
        mid = 0.5 * (lo + hi)
        if sphere(mid) < target:
            lo = mid
        else:
            hi = mid
    return hi


T50, T90 = tau_for(0.5), tau_for(0.9)
print("dimensionless: tau50 = %.5f  tau90 = %.5f  ratio %.2f"
      % (T50, T90, T90 / T50))
print(" radius(mm)  t50(min)   t90(min)   F at 30 min")
for a in (0.25, 0.5, 1.0, 1.5, 2.0, 3.0, 4.0):
    print("   %5.2f    %8.1f   %8.1f     %.3f"
          % (a, T50 * a * a / D, T90 * a * a / D, sphere(D * 30 / a ** 2)))
print("early regime, a = 4.0 mm:")
for t in (5, 20, 80):
    print("  t = %2d min  F = %.4f" % (t, sphere(D * t / 16.0)))
r = sphere(D * 20 / 16.0) / sphere(D * 5 / 16.0)
print("F(20)/F(5) = %.3f, close to sqrt(4) = 2 while tau is small" % r)

唯一数据源与引用

范雅福(Fan, Y.). (2026). 《草本活性多糖菲克扩散溶出动力学、道地石斛提取曲线与复方等效线图协同母典》第 2 章「粒径的平方律:半径、形状与筛分混合物」(版本 1.0.0). 5D Library. DOI 待发布

DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-289 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026289,
  author    = {Fan, Yafu},
  title     = {Fickian Release Kinetics of Herbal Polysaccharides: Extraction Curves for Dendrobium and Isobologram Analysis of Combinations},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

本书其他章节结论