关于「临界胶束浓度、溶度积与五类表活的折损曲线」,《硬水、螯合与泡沫》给出的定量结论是什么?
结论:第一张表读法如下。每一格是该表活浓度下,开始析出时所需的总钙浓度,单位毫摩尔每升。脂肪酸皂四格都低于 0.001,任何硬水都让它析出。烷基硫酸盐在 100 毫摩尔每升的浓稠泡沫里能耐 10.050 的钙,稀释到 20 降为 2.050,再稀释到 5 只剩 0.550;继续稀释到 1,反而回升到 1.000。酰基谷氨酸盐的四格是 12.967、2.896、1.007 与 1.259,形状相同,整体略高。醚硫酸盐最耐钙,最低一格仍有 50.399。
数据口径:钙镁离子先压低临界胶束浓度,只在冲洗稀释的中间段才析出钙盐,折损按表活体系分档:皂基最重,烷基硫酸盐次之,酰基谷氨酸盐居中,醚硫酸盐与两性、非离子表活几乎不受影响;示意 W4 水里,烷基硫酸盐在冲洗初段的折损份额为 0.632。 螯合剂按摩尔一比一结合钙镁,示意剂量下一次用量只软化 10.5 毫升硬水,连起泡兑水都覆盖不全;全部软化一次淋浴需要配方含量的 1,524 倍,一整瓶只够花洒流约 3.16 秒。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 与结论吻合的打印值: 0.001, 0.550, 1.000, 1.007, 1.259, 10.050
Ca tolerance, total mmol/L, at surfactant level S (mol/L) class S=0.100 S=0.020 S=0.005 S=0.001 fatty acid soap <0.001 <0.001 <0.001 <0.001 alkyl sulfate 10.050 2.050 0.550 1.000 acyl glutamate 12.967 2.896 1.007 1.259 ether sulfate 539.564 144.279 70.163 50.399 betaine / nonionic no calcium salt precipitates W4 water has 1.875 mmol/L Ca; ppt = tolerance below that fatty acid soap ppt ppt ppt ppt alkyl sulfate ok ok ppt ppt acyl glutamate ok ok ppt ppt ether sulfate ok ok ok ok W4 band of S (mmol/L) where precipitation is predicted fatty acid soap 0.100 to 100.000 alkyl sulfate 0.741 to 18.197 acyl glutamate 0.676 to 11.749 ether sulfate none
查看完整验算程序
# Chapter 2. p22: calcium tolerance of five surfactant classes vs dilution.
# Model: a calcium salt CaX_n precipitates when [Ca_free][X]^n > Ksp.
# Above the CMC the free monomer X is pinned near the CMC m, and micelles
# bind part of the calcium, free Ca = total Ca / (1 + Kb * (S - m)).
# Below the CMC there are no micelles and X = S. Tolerance = the total
# Ca at which precipitation starts. Every Ksp, m and Kb below is an
# illustrative order of magnitude chosen to show the shape of the
# argument; none is a measured constant, and activity corrections
# (Chapter 1, p12) are left out because they move all classes alike.
CLASSES = (
# name, n, log10 Ksp, monomer m (mol/L), Kb (L/mol)
("fatty acid soap", 2, -15.0, 1.0e-3, 100.0),
("alkyl sulfate", 2, -9.0, 2.0e-3, 400.0),
("acyl glutamate", 1, -5.9, 2.0e-3, 200.0),
("ether sulfate", 2, -7.5, 0.8e-3, 100.0),
)
def tolerance(n, logk, m, kb, s):
ksp = 10 ** logk
if s <= m:
return ksp / s ** n
return ksp / m ** n * (1.0 + kb * (s - m))
def fmt(x):
if x >= 1000.0:
return " >999"
if x < 0.001:
return " <0.001"
return "{:>7.3f}".format(x)
if __name__ == "__main__":
levels = (0.1, 0.02, 0.005, 0.001)
print("Ca tolerance, total mmol/L, at surfactant level S (mol/L)")
print(" class S=0.100 S=0.020 S=0.005 S=0.001")
for name, n, logk, m, kb in CLASSES:
cells = [fmt(tolerance(n, logk, m, kb, s) * 1000) for s in levels]
print(" {:<18} ".format(name) + " ".join(cells))
print(" betaine / nonionic no calcium salt precipitates")
print("W4 water has 1.875 mmol/L Ca; ppt = tolerance below that")
for name, n, logk, m, kb in CLASSES:
flags = []
for s in levels:
t = tolerance(n, logk, m, kb, s) * 1000
flags.append("ppt" if t < 1.875 else "ok ")
print(" {:<18} ".format(name) + " ".join(flags))
print("W4 band of S (mmol/L) where precipitation is predicted")
for name, n, logk, m, kb in CLASSES:
band = []
for k in range(0, 301):
s = 10 ** (-4.0 + k / 100.0)
if tolerance(n, logk, m, kb, s) * 1000 < 1.875:
band.append(s * 1000)
if not band:
print(" {:<18} none".format(name))
elif band[-1] > 999:
print(" {:<18} every level tested".format(name))
else:
print(" {:<18} {:.3f} to {:.3f}".format(
name, band[0], band[-1]))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《洗护配方水质硬度化学、钙镁离子螯合软化与表活泡沫沉积增效母典》第 2 章「临界胶束浓度、溶度积与五类表活的折损曲线」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-389 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026389,
author = {Fan, Yafu},
title = {Water-Hardness Chemistry in Personal-Care Formulations, Calcium-Magnesium Chelation and Surfactant Foam-Deposition Enhancement},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}