What does Hard Water, Chelation and Lather conclude, in numbers, about “Critical Micelle Concentration, Solubility Products and the Loss Curves of Five Surfactant Classes”?

Answer: The first table reads as follows. Each cell is the total calcium concentration, in millimoles per litre, at which precipitation starts for the stated surfactant level. The fatty-acid soap stays below 0.001 in all four cells: any hard water makes it precipitate. The alkyl sulfate tolerates 10.050 mmol/L of calcium in a dense lather of 100 mmol/L; diluted to 20 mmol/L it tolerates 2.050, and diluted to 5 mmol/L only 0.550. Diluted further to 1 mmol/L, its tolerance climbs back to 1.000. The acyl glutamate gives 12.967, 2.896, 1.007 and 1.259: the same shape, somewhat higher overall. The ether sulfate is the most tolerant of all; even its lowest cell is 50.399.

Scope of the numbers: Chapter 1 covers units of hardness, six illustrative waters and the activity of calcium. Parameters are illustrative and all calculations are generated by the book's programs.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. printed values that match the answer: 0.001, 0.550, 1.000, 1.007, 1.259, 10.050

Ca tolerance, total mmol/L, at surfactant level S (mol/L)
  class               S=0.100  S=0.020  S=0.005  S=0.001
  fatty acid soap     <0.001   <0.001   <0.001   <0.001
  alkyl sulfate       10.050    2.050    0.550    1.000
  acyl glutamate      12.967    2.896    1.007    1.259
  ether sulfate      539.564  144.279   70.163   50.399
  betaine / nonionic   no calcium salt precipitates
W4 water has 1.875 mmol/L Ca; ppt = tolerance below that
  fatty acid soap     ppt      ppt      ppt      ppt
  alkyl sulfate       ok       ok       ppt      ppt
  acyl glutamate      ok       ok       ppt      ppt
  ether sulfate       ok       ok       ok       ok
W4 band of S (mmol/L) where precipitation is predicted
  fatty acid soap     0.100 to 100.000
  alkyl sulfate       0.741 to 18.197
  acyl glutamate      0.676 to 11.749
  ether sulfate       none
Show the full program
# Chapter 2. p22: calcium tolerance of five surfactant classes vs dilution.
# Model: a calcium salt CaX_n precipitates when [Ca_free][X]^n > Ksp.
# Above the CMC the free monomer X is pinned near the CMC m, and micelles
# bind part of the calcium, free Ca = total Ca / (1 + Kb * (S - m)).
# Below the CMC there are no micelles and X = S. Tolerance = the total
# Ca at which precipitation starts. Every Ksp, m and Kb below is an
# illustrative order of magnitude chosen to show the shape of the
# argument; none is a measured constant, and activity corrections
# (Chapter 1, p12) are left out because they move all classes alike.
CLASSES = (
    # name, n, log10 Ksp, monomer m (mol/L), Kb (L/mol)
    ("fatty acid soap", 2, -15.0, 1.0e-3, 100.0),
    ("alkyl sulfate", 2, -9.0, 2.0e-3, 400.0),
    ("acyl glutamate", 1, -5.9, 2.0e-3, 200.0),
    ("ether sulfate", 2, -7.5, 0.8e-3, 100.0),
)


def tolerance(n, logk, m, kb, s):
    ksp = 10 ** logk
    if s <= m:
        return ksp / s ** n
    return ksp / m ** n * (1.0 + kb * (s - m))


def fmt(x):
    if x >= 1000.0:
        return "   >999"
    if x < 0.001:
        return " <0.001"
    return "{:>7.3f}".format(x)


if __name__ == "__main__":
    levels = (0.1, 0.02, 0.005, 0.001)
    print("Ca tolerance, total mmol/L, at surfactant level S (mol/L)")
    print("  class               S=0.100  S=0.020  S=0.005  S=0.001")
    for name, n, logk, m, kb in CLASSES:
        cells = [fmt(tolerance(n, logk, m, kb, s) * 1000) for s in levels]
        print("  {:<18} ".format(name) + "  ".join(cells))
    print("  betaine / nonionic   no calcium salt precipitates")
    print("W4 water has 1.875 mmol/L Ca; ppt = tolerance below that")
    for name, n, logk, m, kb in CLASSES:
        flags = []
        for s in levels:
            t = tolerance(n, logk, m, kb, s) * 1000
            flags.append("ppt" if t < 1.875 else "ok ")
        print("  {:<18}  ".format(name) + "      ".join(flags))
    print("W4 band of S (mmol/L) where precipitation is predicted")
    for name, n, logk, m, kb in CLASSES:
        band = []
        for k in range(0, 301):
            s = 10 ** (-4.0 + k / 100.0)
            if tolerance(n, logk, m, kb, s) * 1000 < 1.875:
                band.append(s * 1000)
        if not band:
            print("  {:<18}  none".format(name))
        elif band[-1] > 999:
            print("  {:<18}  every level tested".format(name))
        else:
            print("  {:<18}  {:.3f} to {:.3f}".format(
                name, band[0], band[-1]))

Single source and citation

Fan, Y. (2026). Water-Hardness Chemistry in Personal-Care Formulations, Calcium-Magnesium Chelation and Surfactant Foam-Deposition Enhancement (Version 1.0.0), Chapter 2: Critical Micelle Concentration, Solubility Products and the Loss Curves of Five Surfactant Classes. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-389 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026389,
  author    = {Fan, Yafu},
  title     = {Water-Hardness Chemistry in Personal-Care Formulations, Calcium-Magnesium Chelation and Surfactant Foam-Deposition Enhancement},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book