关于「从折损份额到泡沫高度:析出颗粒与泡沫半衰期」,《硬水、螯合与泡沫》给出的定量结论是什么?

结论:第一张表是 5 毫摩尔每升的稀薄状态,对应冲洗最初几秒。软水里四类表活的初始高度都是 128.6 毫米,因为表活浓度相同。进入硬水以后,四条曲线迅速分开。脂肪酸皂在 W1 已降到 97.3,W3 降到 39.0,W4 为 15.4,W6 归零,比值 0.000。烷基硫酸盐在 W1 不受影响,W3 降到 59.0,W4 为 24.4,W6 为 9.3,比值 0.073。酰基谷氨酸盐在 W3 仍有 116.2,W4 为 80.7,W6 为 25.5,比值 0.199。醚硫酸盐四档都是 128.6,比值 1.000。

数据口径:钙镁离子先压低临界胶束浓度,只在冲洗稀释的中间段才析出钙盐,折损按表活体系分档:皂基最重,烷基硫酸盐次之,酰基谷氨酸盐居中,醚硫酸盐与两性、非离子表活几乎不受影响;示意 W4 水里,烷基硫酸盐在冲洗初段的折损份额为 0.632。 螯合剂按摩尔一比一结合钙镁,示意剂量下一次用量只软化 10.5 毫升硬水,连起泡兑水都覆盖不全;全部软化一次淋浴需要配方含量的 1,524 倍,一整瓶只够花洒流约 3.16 秒。

English version

对照数据表

下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 0.000, 0.073, 0.199, 1.000, 116.2, 128.6

initial foam height mm at S5 mmol/L; soft = 0 mmol/L
class soft0.4 1.6 2.5 5.0 W6/soft
fatty acid soap128.6 97.3 39.0 15.4 0.0 0.000
alkyl sulfate128.6 128.6 59.0 24.4 9.3 0.073
acyl glutamate128.6 128.6 116.2 80.7 25.5 0.199
ether sulfate128.6 128.6 128.6 128.6 128.6 1.000
same water, richer lather S20 mmol/L, alkyl sulfate
H0.4 lost 0.000 height 163.6 mm
H2.5 lost 0.000 height 163.6 mm
H5.0 lost 0.212 height 104.4 mm
查看完整验算程序
# Chapter 3. p31: initial foam height as calcium removes surfactant.
# Model: initial height H0 = Hmax * a / (a + K) * exp(-beta * lost),
# where a is the surfactant left in solution, K the half-saturation
# level and the exponential term an antifoam penalty for precipitated
# particles. Lost shares come from the p22/p23 equilibrium (code copied
# so that this file runs alone). Hmax = 180 mm (a Ross-Miles-like scale),
# K = 2 mmol/L and beta = 2.0 are illustrative, not measured. The
# chapter's hypothesis compares height ratios with 0.9 (lather) and
# 0.5 (rinse).
import math

CLASSES = (
    ("fatty acid soap", 2, -15.0, 1.0e-3, 100.0),
    ("alkyl sulfate", 2, -9.0, 2.0e-3, 400.0),
    ("acyl glutamate", 1, -5.9, 2.0e-3, 200.0),
    ("ether sulfate", 2, -7.5, 0.8e-3, 100.0),
)
HMAX, KHALF, BETA = 180.0, 2.0e-3, 2.0


def excess(p, ca, s, n, logk, m, kb):
    left = s - n * p
    if left <= 0.0:
        return -1.0
    mono, mic = (m, left - m) if left > m else (left, 0.0)
    return (ca - p) / (1.0 + kb * mic) * mono ** n - 10 ** logk


def lost_share(ca, s, n, logk, m, kb):
    if excess(0.0, ca, s, n, logk, m, kb) <= 0.0:
        return 0.0
    lo, hi = 0.0, min(ca, s / n)
    for _ in range(200):
        mid = (lo + hi) / 2.0
        if excess(mid, ca, s, n, logk, m, kb) > 0.0:
            lo = mid
        else:
            hi = mid
    return n * lo / s


def height(s, lost):
    a = s * (1.0 - lost)
    return HMAX * a / (a + KHALF) * math.exp(-BETA * lost)


if __name__ == "__main__":
    hard = (0.4, 1.6, 2.5, 5.0)
    s = 0.005
    print("initial foam height mm at S = 5 mmol/L; soft = 0 mmol/L")
    print("  class               soft" + "".join(
        "{:>7.1f}".format(h) for h in hard) + "  W6/soft")
    for name, n, logk, m, kb in CLASSES:
        h0 = height(s, 0.0)
        row = [height(s, lost_share(0.75 * h / 1000, s, n, logk, m, kb))
               for h in hard]
        print("  {:<18} {:>5.1f}".format(name, h0) + "".join(
            "{:>7.1f}".format(x) for x in row) +
            "  {:>7.3f}".format(row[-1] / h0))
    print("same water, richer lather S = 20 mmol/L, alkyl sulfate")
    for h in (0.4, 2.5, 5.0):
        ls = lost_share(0.75 * h / 1000, 0.02, 2, -9.0, 2.0e-3, 400.0)
        print("  H = {:.1f}  lost {:.3f}  height {:.1f} mm".format(
            h, ls, height(0.02, ls)))

唯一数据源与引用

范雅福(Fan, Y.). (2026). 《洗护配方水质硬度化学、钙镁离子螯合软化与表活泡沫沉积增效母典》第 3 章「从折损份额到泡沫高度:析出颗粒与泡沫半衰期」(版本 1.0.0). 5D Library. DOI 待发布

DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-389 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026389,
  author    = {Fan, Yafu},
  title     = {Water-Hardness Chemistry in Personal-Care Formulations, Calcium-Magnesium Chelation and Surfactant Foam-Deposition Enhancement},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

本书其他章节结论