What does Acoustics and the Psychology of Built Space conclude, in numbers, about “Standing Waves, Room Modes and Low-Frequency Noise”?
Answer: The normal frequencies of a rectangular room are given by \(f = \frac{c}{2}\sqrt{(n_x/L)2 + (n_y/W)2 + (n_z/H)2}\), and the number of modes grows as \(f3\). At equal volume, a cube's 62 modes below 200 Hz fall on only 15 frequencies, whereas a 1:1.4:1.9 room has almost no coincidences; the Schroeder frequency \(2000\sqrt{T/V}\) marks the boundary between the modal and diffuse regions (about 185–262 Hz for the example room). At a single seat, though, listener position and low-frequency damping matter at least as much as proportions. A-weighting hides low-frequency noise: two ventilation noises at the same 40 dB(A) can differ by 13 dB in C − A. The 2002 experiment by Persson Waye and colleagues suggests that low-frequency noise may affect the cortisol rhythm of highly sensitive people, but the evidence is limited. The next chapter discusses a property of sound that matters more than decibels: the voices in the background.
Scope of the numbers: This book is not medical advice; problems with hearing or sleep call for a doctor. Marked boxes separate published evidence, runnable Python calculations (15 programs, all checked), classical sources and the author's hypotheses.
Data table
The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 1.4, 1.9, 15, 185, 200, 2000
| cube 3.60 m 3.60 x 3.60 x 3.60 m, V | 46.7 m3 |
| modes < | 200 Hz: 62 (12 axial, 30 tangential, 20 oblique); Weyl 63 |
| distinct frequencies | 15; lowest 47.6 Hz; largest gap below 120 Hz 19.8 Hz |
| modes per third-octave 20-200 Hz | 0 0 0 3 0 3 4 9 18 25 (decreases) |
| 1 | 2:2 4.54 x 4.54 x 2.27 m, V = 46.8 m3 |
| modes < | 200 Hz: 62 (12 axial, 31 tangential, 19 oblique); Weyl 64 |
| distinct frequencies | 20; lowest 37.8 Hz; largest gap below 120 Hz 22.2 Hz |
| modes per third-octave 20-200 Hz | 0 0 2 0 1 3 5 9 16 26 (decreases) |
| 1 | 1.4:1.9 4.94 x 3.64 x 2.60 m, V = 46.8 m3 |
| modes < | 200 Hz: 63 (12 axial, 31 tangential, 20 oblique); Weyl 64 |
| distinct frequencies | 62; lowest 34.7 Hz; largest gap below 120 Hz 12.4 Hz |
| modes per third-octave 20-200 Hz | 0 0 1 1 1 3 6 7 18 26 (never decreasing) |
| Schroeder frequency 2000 sqrt(T/V) for V | 46.7 m3, T = 0.4 s: 185 Hz |
| Schroeder frequency 2000 sqrt(T/V) for V | 46.7 m3, T = 0.8 s: 262 Hz |
Key formula
Show the full program
# Rectangular-room modes f = (c/2) sqrt((nx/L)^2 + (ny/W)^2 + (nz/H)^2) for three rooms
# of equal volume (about 46.7 m3); degeneracy, gaps, Bonello's third-octave counts,
# Schroeder frequency.
import math, itertools
c = 343.0
ROOMS = {"cube 3.60 m": (3.60, 3.60, 3.60), "1:2:2": (4.54, 4.54, 2.27),
"1:1.4:1.9": (4.94, 3.64, 2.60)}
def modes(L, W, H, fmax):
out = []
for n in itertools.product(range(12), repeat=3):
f = c / 2 * math.sqrt((n[0] / L) ** 2 + (n[1] / W) ** 2 + (n[2] / H) ** 2)
if 0 < f <= fmax:
out.append((f, ("axial", "tangential", "oblique")[sum(k > 0 for k in n) - 1]))
return sorted(out)
def weyl(L, W, H, f): # expected number of modes below f (Weyl / Maa formula)
V, S, E = L * W * H, 2 * (L * W + L * H + W * H), 4 * (L + W + H)
return 4 * math.pi * V * f ** 3 / (3 * c ** 3) + math.pi * S * f ** 2 / (4 * c ** 2) \
+ E * f / (8 * c)
THIRDS = [20 * 2 ** (k / 3) for k in range(11)] # third-octave edges 20 ... 200 Hz
for name, (L, W, H) in ROOMS.items():
m = modes(L, W, H, 200.0)
fs = [f for f, _ in m]
distinct = sorted(set(round(f, 1) for f in fs))
low = [f for f in distinct if f <= 120]
gaps = [b - a for a, b in zip(low, low[1:])]
kinds = {k: sum(x == k for _, x in m) for k in ("axial", "tangential", "oblique")}
counts = [sum(1 for f in fs if a <= f < b) for a, b in zip(THIRDS, THIRDS[1:])]
print(f"{name:10s} {L:.2f} x {W:.2f} x {H:.2f} m, V = {L * W * H:.1f} m3")
print(f" modes <= 200 Hz: {len(m)} ({kinds['axial']} axial, {kinds['tangential']}"
f" tangential, {kinds['oblique']} oblique); Weyl {weyl(L, W, H, 200):.0f}")
print(f" distinct frequencies: {len(distinct)}; lowest {distinct[0]:.1f} Hz;"
f" largest gap below 120 Hz {max(gaps):.1f} Hz")
print(" modes per third-octave 20-200 Hz: " + " ".join(f"{n:2d}" for n in counts)
+ (" (never decreasing)" if all(b >= a for a, b in zip(counts, counts[1:]))
else " (decreases)"))
for T in (0.4, 0.8):
print(f"Schroeder frequency 2000 sqrt(T/V) for V = 46.7 m3, T = {T} s:"
f" {2000 * math.sqrt(T / 46.7):.0f} Hz")Single source and citation
Fan, Y. (2026). Architectural Acoustics, Reverberation Time and the Environmental Psychology of Built Space (Version 1.0.0), Chapter 2: Standing Waves, Room Modes and Low-Frequency Noise. 5D Library. https://doi.org/10.5281/zenodo.23782090
DOI: 10.5281/zenodo.23782090 · Read the monograph · 5DL-B-031 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026031,
author = {Fan, Yafu},
title = {Architectural Acoustics, Reverberation Time and the Environmental Psychology of Built Space},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
doi = {10.5281/zenodo.23782090},
url = {https://doi.org/10.5281/zenodo.23782090}
}Other chapter answers in this book
- Chapter 1 · Sabine and Eyring: Reverberation Time and Speech Clarity
- Chapter 3 · Open-Plan Offices and the Irrelevant Speech Effect
- Chapter 4 · Trees outside the Window: Fractal Dimension and Biophilic Design
- Chapter 5 · Illuminance, Spectrum and Ceiling Height
- Chapter 6 · Carbon Dioxide, Ventilation and Decision-Making
- Chapter 8 · Practice and a Pre-Registered Trial