What does Oscillations, Flattening and Recovery conclude, in numbers, about “What the Pulses Are For”?

Answer: Chapter 2 shows why the pulses exist: the same daily total in the sharpest pulses holds mean occupancy to 0.1132 of a flat infusion, while peak over mean rises from 1.000 to 16.667.

Scope of the numbers: Its parameters are illustrative or synthetic; all figures are produced by the programs printed in the book; the book is not medical advice and does not diagnose. Marked boxes separate published evidence, runnable Python calculations (sixteen programs), classical sources and the author's hypotheses.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. printed values that match the answer: 0.1132, 1.000, 16.667

same daily mean of 1.0 in every pattern
pattern peak mean occupancy peak occupancy
flat infusion1.00 0.5000 0.5000
6 broad pulses2.00 0.3333 0.6667
12 pulses4.00 0.2000 0.8000
16 pulses5.99 0.1440 0.8569
24 sharp pulses10.00 0.0916 0.9091
36 sharper pulses16.67 0.0566 0.9434
occupancy of a flat infusion at the same mean0.5000
pattern occupancy relative to flat
flat infusion1.0000
6 broad pulses0.6667
12 pulses0.4000
16 pulses0.2879
24 sharp pulses0.1832
36 sharper pulses0.1132
the sharpest pattern holds occupancy down to 0.1132 of the
flat value while delivering the same amount of hormone
and its peak occupancy is 0.9434 against 0.5000 flat,
so the signal is larger and the average load lower
peak to mean ratio of occupancy, by pattern:
flat infusion1.000
6 broad pulses2.000
12 pulses4.000
16 pulses5.952
24 sharp pulses9.926
36 sharper pulses16.667
that ratio is the contrast a downstream reader can see,
Show the full program
# Chapter 2. p03: Why the hormone arrives in pulses rather than steadily.
# A receptor's occupancy is a saturating function of the hormone around
# it, and a saturating function of a fluctuating input is not the same as
# the function of its average. Delivering the same daily amount in tall
# brief pulses therefore produces a different mean occupancy from
# delivering it as a flat infusion, and the difference is not a detail:
# it is the whole reason a pulsatile axis can carry a large signal
# without keeping its own receptors permanently engaged.
KD, HILL = 1.0, 1.0        # occupancy half-point and Hill exponent
MEAN, DT, HOURS = 1.0, 0.002, 24.0
PATTERNS = (
    # label, pulses a day, duty cycle (share of the day with hormone up)
    ("flat infusion",      1, 1.000),
    ("6 broad pulses",     6, 0.500),
    ("12 pulses",         12, 0.250),
    ("16 pulses",         16, 0.167),
    ("24 sharp pulses",   24, 0.100),
    ("36 sharper pulses", 36, 0.060),
)

def occupancy(c):
    return c ** HILL / (KD ** HILL + c ** HILL)

def profile(n_pulses, duty):
    # square pulses of height set so the daily mean is MEAN
    height = MEAN / duty
    period = HOURS / n_pulses
    on = period * duty
    steps = int(round(HOURS / DT))
    out = []
    for i in range(steps):
        t = (i * DT) % period
        out.append(height if t < on else 0.0)
    return out

if __name__ == "__main__":
    print("   same daily mean of {:.1f} in every pattern".format(MEAN))
    print("   pattern             peak    mean occupancy   peak occupancy")
    rows = []
    for label, n, duty in PATTERNS:
        c = profile(n, duty)
        occ = [occupancy(v) for v in c]
        m = sum(occ) / len(occ)
        rows.append((label, max(c), m, max(occ)))
        print("   {:<20}{:<8.2f}{:<17.4f}{:.4f}"
              .format(label, max(c), m, max(occ)))
    flat = rows[0]
    print("   occupancy of a flat infusion at the same mean: {:.4f}"
          .format(flat[2]))
    print("   pattern             occupancy relative to flat")
    for label, peak, m, pk in rows:
        print("   {:<20}{:.4f}".format(label, m / flat[2]))
    best = min(rows[1:], key=lambda r: r[2])
    print("   the sharpest pattern holds occupancy down to {:.4f} of the"
          .format(best[2] / flat[2]))
    print("   flat value while delivering the same amount of hormone")
    print("   and its peak occupancy is {:.4f} against {:.4f} flat,"
          .format(best[3], flat[3]))
    print("   so the signal is larger and the average load lower")
    print("   peak to mean ratio of occupancy, by pattern:")
    for label, peak, m, pk in rows:
        print("   {:<20}{:.3f}".format(label, pk / m))
    print("   that ratio is the contrast a downstream reader can see,")
    print("   and it rises from {:.3f} to {:.3f} across the table"
          .format(rows[0][3] / rows[0][2], rows[-1][3] / rows[-1][2]))

Single source and citation

Fan, Y. (2026). HPA-Axis Coupled Oscillations, Cortisol Awakening Response Flattening and Burnout Recovery Kinetics (Version 1.0.0), Chapter 2: What the Pulses Are For. 5D Library. https://doi.org/10.5281/zenodo.24090252

DOI: 10.5281/zenodo.24090252 · Read the monograph · 5DL-B-097 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026097,
  author    = {Fan, Yafu},
  title     = {HPA-Axis Coupled Oscillations, Cortisol Awakening Response Flattening and Burnout Recovery Kinetics},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  doi       = {10.5281/zenodo.24090252},
  url       = {https://doi.org/10.5281/zenodo.24090252}
}

Other chapter answers in this book