关于「可塑性窗口:闸门,不是驱动」,《亚知觉色胺动力学与可塑性窗口》给出的定量结论是什么?
结论:结构可塑性的证据是实在的:培养神经元与动物中的树突棘与树突复杂度增加,在体成像显示快速且持久的棘生长。机制上有两个意外:小鼠的突触与行为效应不被 5-HT2 拮抗剂阻断,而这类化合物可直接结合 TrkB;两者都提示存在不经 5-HT2A 的通路,这使以受体占据为基础的剂量推理更不适用。关键期重开的框架给出本章的主结果:窗口是闸门而不是驱动——在模型中,没有输入时无论窗口多宽突触权重都停在 0,所以对窗口的测量不能预测是否学到了东西。输入的延迟远比其时长重要:紧接暴露的两天达到最佳的 78%,延到第 4–6 天只有 6%,而把两天延长到七天只增加约 28%。因此真正要紧的日程是练习相对于暴露的日程,不是给药日程。把窗口与受体棘轮合在一起的模型需要未被测量的恢复半衰期,本书不写。
数据口径:本书是教学与研究用的生物数学与方法学讨论,不是医疗建议,也不是任何物质的使用指南。 本书讨论的物质在多数司法辖区受管制;书中不给出任何剂量、质量、产品、来源、途径、合成或疗程:全书的剂量一律以相对于一个未指定参考值的无量纲比值表示,这是第 8 本确立的写法。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 28, 78
| One exposure at day 0. Window half-life varied. The input ('practice') is | |
| present on days 0-2 in the first block and absent in the second. | |
| window half-life (d) peak W AUC of W AUC of W x I final S | |
| 0.25 | 0.311 0.120 0.120 0.0717 |
| 0.50 | 0.320 0.240 0.224 0.1285 |
| 1.00 | 0.326 0.478 0.357 0.1936 |
| 2.00 | 0.328 0.955 0.474 0.2451 |
| 4.00 | 0.329 1.899 0.554 0.2774 |
| Same exposures, NO input at all: | |
| window half-life (d) peak W AUC of W AUC of W x I final S | |
| 0.25 | 0.311 0.120 0.000 0.0000 |
| 0.50 | 0.320 0.240 0.000 0.0000 |
| 1.00 | 0.326 0.478 0.000 0.0000 |
| 2.00 | 0.328 0.955 0.000 0.0000 |
| 4.00 | 0.329 1.899 0.000 0.0000 |
| The window is identical in the two blocks - same peak, same area - and | |
| the weight ends at 0 in the second. A measurement of the window (a | |
| marker, spine density, a plasticity assay) therefore cannot predict | |
| whether anything was learned; it reports that the gate was open. | |
| Timing of the input relative to a window of half-life 1 day: | |
| input window (days) AUC of W x I final S S relative to best | |
| day 0 to 2 | 0.357 0.1936 78.4% |
| day 1 to 3 | 0.182 0.1078 43.6% |
| day 2 to 4 | 0.091 0.0568 23.0% |
| day 4 to 6 | 0.023 0.0150 6.1% |
| day 7 to 9 | 0.003 0.0020 0.8% |
| day 0 to 7 | 0.474 0.2471 100.0% |
| What matters is LATENCY, not duration. Two days of input starting at |
核心公式
查看完整验算程序
# Chapter 6. A "window of plasticity", written as a two-state model, and what
# a window can and cannot do on its own. A plasticity-permissive state W opens
# after an exposure and closes with rate kc; synaptic weight S changes only
# while W is open AND an input I is present:
# dW/dt = a * stim(t) * (1 - W) - kc * W
# dS/dt = eta * W * I(t) * (target - S) - decay * S
# The point is in the second equation: the window is a GATE, not a drive. With
# I = 0 the weight does not move however wide the window. So "a window was
# opened" is not by itself a mechanism of benefit, and the thing that has to
# be scheduled is the input, not only the exposure. Author's model;
# dimensionless; time in days.
import math
DT = 0.001
A_STIM, ETA, DECAY, TARGET = 8.0, 0.9, 0.012, 1.0
def run(open_half_life, inputs, exposures=(0.0,), t_end=30.0, input_amp=1.0):
"""inputs: list of (start, duration) in days when the practice/input is
present."""
kc = math.log(2.0) / open_half_life
W, S = 0.0, 0.0
peakW, auc_W, auc_WI = 0.0, 0.0, 0.0
for i in range(int(t_end / DT)):
t = i * DT
stim = 1.0 if any(abs(t - e) < 0.05 for e in exposures) else 0.0
I = input_amp if any(s <= t < s + d for s, d in inputs) else 0.0
W += DT * (A_STIM * stim * (1.0 - W) - kc * W)
S += DT * (ETA * W * I * (TARGET - S) - DECAY * S)
peakW = max(peakW, W)
auc_W += W * DT
auc_WI += W * I * DT
return peakW, auc_W, auc_WI, S
if __name__ == "__main__":
print(
"One exposure at day 0. Window half-life varied. The input"
" ('practice') is"
)
print(
"present on days 0-2 in the first block and absent in the second.\n"
)
print(
" window half-life (d) peak W AUC of W AUC of W x I final S"
)
for hl in (0.25, 0.5, 1.0, 2.0, 4.0):
pw, aw, awi, S = run(hl, inputs=[(0.0, 2.0)])
print(
" {:20.2f} {:9.3f} {:10.3f} {:14.3f} {:9.4f}".format(
hl, pw, aw, awi, S
)
)
print("\n Same exposures, NO input at all:")
print(
" window half-life (d) peak W AUC of W AUC of W x I final S"
)
for hl in (0.25, 0.5, 1.0, 2.0, 4.0):
pw, aw, awi, S = run(hl, inputs=[])
print(
" {:20.2f} {:9.3f} {:10.3f} {:14.3f} {:9.4f}".format(
hl, pw, aw, awi, S
)
)
print(
"\n The window is identical in the two blocks - same peak, same"
" area - and"
)
print(
" the weight ends at 0 in the second. A measurement of the"
" window (a"
)
print(
" marker, spine density, a plasticity assay) therefore cannot"
" predict"
)
print(
" whether anything was learned; it reports that the gate was open."
)
print("\nTiming of the input relative to a window of half-life 1 day:")
print(
" input window (days) AUC of W x I final S S relative to best"
)
rows = []
for start, dur in (
(0.0, 2.0),
(1.0, 2.0),
(2.0, 2.0),
(4.0, 2.0),
(7.0, 2.0),
(0.0, 7.0),
):
pw, aw, awi, S = run(1.0, inputs=[(start, dur)])
rows.append((start, dur, awi, S))
best = max(r[3] for r in rows)
for start, dur, awi, S in rows:
print(" day {:.0f} to {:.0f} {:20.3f} {:9.4f} {:17.1%}"
.format(start, start + dur, awi, S, S / best))
d02 = [r for r in rows if r[0] == 0.0 and r[1] == 2.0][0][3]
d07 = [r for r in rows if r[1] == 7.0][0][3]
d46 = [r for r in rows if r[0] == 4.0][0][3]
d79 = [r for r in rows if r[0] == 7.0][0][3]
print(
"\n What matters is LATENCY, not duration. Two days of input"
" starting at"
)
print(
" the exposure reaches {:.0%} of the best case; the same two days"
" delayed".format(d02 / best)
)
print(
" to days 4-6 reaches {:.0%} and to days 7-9 {:.0%}. Extending the"
" input".format(d46 / best, d79 / best)
)
print(
" from two days to seven adds only {:+.0%}, because the window has"
" closed".format(d07 / d02 - 1.0)
)
print(
" and the extra days fall outside it. So within this model there"
" is a"
)
print(
" schedule that matters, and it is a schedule of PRACTICE"
" relative to"
)
print(
" exposure - not the dosing schedule that popular accounts discuss."
)
print(
"\nRepeated exposures with input always present, window half-life 1"
" day:"
)
print(" exposures (days) final S")
for label, ex in (("day 0 only", (0.0,)), ("days 0, 3", (0.0, 3.0)),
("days 0, 3, 6", (0.0, 3.0, 6.0)),
("days 0, 1, 2, 3", (0.0, 1.0, 2.0, 3.0))):
pw, aw, awi, S = run(1.0, inputs=[(0.0, 30.0)], exposures=ex)
print(" {:18s} {:9.4f}".format(label, S))
print(
"\n NOTE what this model does NOT include: any dependence of the"
" window on"
)
print(
" receptor density. Chapter 4 showed receptors ratchet down under"
" tight"
)
print(
" schedules, so a model combining the two would predict diminishing"
)
print(
" windows. Writing that model requires the recovery half-life"
" tau_R, which"
)
print(
" is unmeasured, so this book does not write it and does not"
" report a"
)
print(" number for the best schedule.")唯一数据源与引用
范雅福(Fan, Y.). (2026). 《亚知觉色胺药代动力学、5-HT2A 受体脱敏与神经可塑性窗口的生物数学模型》第 6 章「可塑性窗口:闸门,不是驱动」(版本 1.0.0). 5D Library. https://doi.org/10.5281/zenodo.24019347
DOI: 10.5281/zenodo.24019347 · 阅读本章所在专著 · 5DL-B-054 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026054,
author = {Fan, Yafu},
title = {Biomathematical Models of Sub-Perceptual Tryptamine Pharmacokinetics, 5-HT2A Receptor Desensitisation and Neuroplastic Window Dynamics},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
doi = {10.5281/zenodo.24019347},
url = {https://doi.org/10.5281/zenodo.24019347}
}