关于「连接熵:与噪声不可区分」,《亚知觉色胺动力学与可塑性窗口》给出的定量结论是什么?
结论:熵脑假说与相关影像学结果是这一领域的核心。本章只处理测量问题,得到两个结果。第一,在高斯图模型中,「熵升高」与「噪声增加」不可区分:真实耦合 0.8 加噪声与真实耦合 0.6 无噪声给出相同的观测相关与相同的熵(相差 0.009 比特),而跨 20 个脑区使熵升高 1 比特只需约 4.6% 的额外噪声方差;头动已知会造成系统性的连接伪迹,且没有混淆回归策略能完全消除它。第二,短窗口的熵估计有系统偏差:12 个脑区、30 个时间点时偏差 \(-1.978\) 比特,而两种耦合强度之间的真实差别是 2.676 比特。解决办法是设计上的:匹配窗口长度的差值比较在每个长度下都接近真值。第八章因此把连接熵类指标列为探索性结局并附三项规定。
数据口径:本书是教学与研究用的生物数学与方法学讨论,不是医疗建议,也不是任何物质的使用指南。 本书讨论的物质在多数司法辖区受管制;书中不给出任何剂量、质量、产品、来源、途径、合成或疗程:全书的剂量一律以相对于一个未指定参考值的无量纲比值表示,这是第 8 本确立的写法。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 0.009, 0.6, 0.8, 20, 4.6
20 regions, one global factor of loading g. Entropy is reported relative to
the independent case (g = 0), in bits; 0 is the maximum.
g mean off-diagonal r relative entropy (bits)
0.00 0.0000 0.000
0.20 0.0400 -0.152
0.40 0.1600 -1.382
0.60 0.3600 -4.631
0.80 0.6400 -12.143
0.90 0.8100 -20.744
Entropy rises as coupling falls, which is the result the entropic-brain
literature reports as an 'increase in entropy'. Now the confound. Adding
independent noise of variance v to every channel attenuates every
correlation by 1/(1+v) and so raises entropy too:
true g added noise v observed mean r relative entropy (bits)
0.800 0.00 0.6400 -12.143
0.800 0.25 0.5120 -8.121
0.800 0.78 0.3596 -4.622
0.600 0.00 0.3600 -4.631
Compare the last two rows. True coupling 0.8 with added noise, and
genuinely weaker coupling 0.6 with no noise, give observed correlations
of 0.3596 and 0.3600 and entropies of -4.622 and -4.631 bits: the same
measurement to within 0.009 bits, from two completely different states
of the brain. An entropy increase is therefore not evidence of a change
in coupling unless the noise is shown not to have changed - and head
motion, breathing and heart rate all change with a drug.
How much noise would be needed to fake a given entropy rise, starting
from true coupling g = 0.8?
target entropy rise (bits) required added noise v查看完整验算程序
# Chapter 5. "Entropy of whole-brain functional connectivity", and what it
# measures. For a multivariate Gaussian the differential entropy is
# H = 0.5 log det(2 pi e Sigma)
# so for a correlation matrix the only thing entropy depends on is log det.
# The program builds a schematic correlation matrix with a single global
# factor of loading g plus independent noise, and shows that entropy rises
# monotonically as g falls. Then it shows that TWO quite different things
# lower g: a genuine reduction in global coupling, and added independent
# measurement noise (head motion, physiological noise, a shorter window). Both
# raise the entropy by the same amount, and no entropy value distinguishes
# them. Exact linear algebra, no simulation; dimensionless.
import math
P = 20 # number of regions
def corr_from_factor(g, noise=0.0):
"""One global factor with loading g, plus independent noise of variance
`noise`."""
out = []
for i in range(P):
row = []
for j in range(P):
if i == j:
row.append(1.0)
else:
row.append(g * g / (1.0 + noise))
out.append(row)
return out
def logdet(M):
"""Cholesky; M must be symmetric positive definite."""
n = len(M)
L = [[0.0] * n for _ in range(n)]
for i in range(n):
for j in range(i + 1):
s = M[i][j] - math.fsum(L[i][k] * L[j][k] for k in range(j))
if i == j:
if s <= 0:
return float("-inf")
L[i][i] = math.sqrt(s)
else:
L[i][j] = s / L[j][j]
return 2.0 * math.fsum(math.log(L[i][i]) for i in range(n))
def entropy_bits(M):
"""Entropy of the standardised multivariate Gaussian, relative to
independence."""
return logdet(M) / (2.0 * math.log(2.0))
if __name__ == "__main__":
print(
"{} regions, one global factor of loading g. Entropy is reported"
" relative to".format(P)
)
print("the independent case (g = 0), in bits; 0 is the maximum.\n")
print(" g mean off-diagonal r relative entropy (bits)")
for g in (0.0, 0.2, 0.4, 0.6, 0.8, 0.9):
M = corr_from_factor(g)
print(
" {:5.2f} {:21.4f} {:24.3f}".format(g, g * g, entropy_bits(M))
)
print(
"\nEntropy rises as coupling falls, which is the result the"
" entropic-brain"
)
print(
"literature reports as an 'increase in entropy'. Now the confound."
" Adding"
)
print("independent noise of variance v to every channel attenuates every")
print("correlation by 1/(1+v) and so raises entropy too:")
print(
"\n true g added noise v observed mean r relative entropy"
" (bits)"
)
rows = []
for g, v in ((0.8, 0.0), (0.8, 0.25), (0.8, 0.78), (0.6, 0.0)):
M = corr_from_factor(g, v)
rows.append((g, v, g * g / (1 + v), entropy_bits(M)))
print(" {:6.3f} {:15.2f} {:17.4f} {:24.3f}".format(*rows[-1]))
print(
"\n Compare the last two rows. True coupling 0.8 with added"
" noise, and"
)
print(
" genuinely weaker coupling 0.6 with no noise, give observed"
" correlations"
)
print(
" of {:.4f} and {:.4f} and entropies of {:.3f} and {:.3f} bits: the"
" same".format(rows[2][2], rows[3][2], rows[2][3], rows[3][3])
)
print(
" measurement to within {:.3f} bits, from two completely different"
" states".format(abs(rows[2][3] - rows[3][3]))
)
print(
" of the brain. An entropy increase is therefore not evidence of a"
" change"
)
print(
" in coupling unless the noise is shown not to have changed - and"
" head"
)
print(" motion, breathing and heart rate all change with a drug.")
print(
"\nHow much noise would be needed to fake a given entropy rise,"
" starting"
)
print("from true coupling g = 0.8?")
base = entropy_bits(corr_from_factor(0.8))
print(" target entropy rise (bits) required added noise v")
need = {}
for target in (0.5, 1.0, 2.0, 4.0):
lo, hi = 0.0, 50.0
for _ in range(60):
mid = 0.5 * (lo + hi)
if entropy_bits(corr_from_factor(0.8, mid)) - base < target:
lo = mid
else:
hi = mid
need[target] = hi
print(" {:26.1f} {:22.3f}".format(target, hi))
print(
"\n A rise of 1 bit across {} regions needs added noise of only"
" {:.1%} of".format(P, need[1.0])
)
print(
" the signal variance, and 4 bits needs {:.0%} - both well inside"
" the range".format(need[4.0])
)
print(
" that a change in head motion or physiological noise can"
" produce. The"
)
print(
" measure is far more sensitive to nuisance variance than its use"
" as a"
)
print(
" marker of 'brain entropy' implies. This is why Chapter 5 asks for"
" motion"
)
print(
" and physiological regressors, a matched-length window and a"
" pre-specified"
)
print(
" estimator, and treats any connectivity entropy as exploratory"
" only."
)唯一数据源与引用
范雅福(Fan, Y.). (2026). 《亚知觉色胺药代动力学、5-HT2A 受体脱敏与神经可塑性窗口的生物数学模型》第 5 章「连接熵:与噪声不可区分」(版本 1.0.0). 5D Library. https://doi.org/10.5281/zenodo.24019347
DOI: 10.5281/zenodo.24019347 · 阅读本章所在专著 · 5DL-B-054 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026054,
author = {Fan, Yafu},
title = {Biomathematical Models of Sub-Perceptual Tryptamine Pharmacokinetics, 5-HT2A Receptor Desensitisation and Neuroplastic Window Dynamics},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
doi = {10.5281/zenodo.24019347},
url = {https://doi.org/10.5281/zenodo.24019347}
}