关于「前药与饱和转化:饱和削平峰值」,《亚知觉色胺动力学与可塑性窗口》给出的定量结论是什么?
结论:赛洛西宾的去磷酸化自 1961 年起就有组织匀浆证据,其代谢有综述,人体药代动力学有递增剂量研究。乙醯基前药的人体转化动力学,本书核查未找到已发表数据,所以本章的米氏参数是假设值。模型给出一个方向与常见说法相反的结果:饱和的前药步骤不使总暴露跳升——质量守恒把 AUC 固定住——而是削平峰值并拉长达峰时间(十倍剂量下,未饱和时峰值升 7.84 倍、达峰时间 1.18 倍;饱和时峰值升 3.49 倍、达峰时间 6.40 倍)。不知道 \(K_m\) 时,同一剂量比例下峰值的不确定度达 13.68 倍。但从单一暴露的曲线拟合给出一个正面结果:\(K_m\) 虽只定到 13 倍以内,五倍暴露下的峰值预测只差 1.31 倍,因为质量守恒约束了总转化。所以障碍不是不可识别性,而是没有数据可拟合——此时峰值的不确定度是 6.13 倍。
数据口径:本书是教学与研究用的生物数学与方法学讨论,不是医疗建议,也不是任何物质的使用指南。 本书讨论的物质在多数司法辖区受管制;书中不给出任何剂量、质量、产品、来源、途径、合成或疗程:全书的剂量一律以相对于一个未指定参考值的无量纲比值表示,这是第 8 本确立的写法。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 1.18, 13.68, 3.49, 6.40, 7.84
| Dimensionless prodrug model. Time unit = elimination half-life of the active | |
| species; concentrations in units of a reference Km. D is a dose FRACTION. | |
| A. Km | 10 (prodrug far below saturation: first-order regime) |
| D Cmax Tmax AUC AUC / D | |
| 0.10 | 0.0094 2.830 0.0756 0.7565 |
| 0.20 | 0.0187 2.844 0.1508 0.7539 |
| 0.50 | 0.0458 2.882 0.3732 0.7463 |
| 1.00 | 0.0890 2.945 0.7338 0.7338 |
| 2.00 | 0.1681 3.065 1.4194 0.7097 |
| 5.00 | 0.3595 3.389 3.2157 0.6431 |
| B. Km | 0.05 (enzyme saturated at these amounts: zero-order regime) |
| D Cmax Tmax AUC AUC / D | |
| 0.10 | 0.0855 0.268 0.1435 1.4351 |
| 0.20 | 0.1651 0.362 0.2863 1.4316 |
| 0.50 | 0.3731 0.641 0.7105 1.4210 |
| 1.00 | 0.6378 1.093 1.4038 1.4038 |
| 2.00 | 0.9658 1.945 2.7420 1.3710 |
| 5.00 | 1.3035 4.100 6.4128 1.2826 |
| AUC / D is nearly constant in BOTH regimes, and that is the first thing to | |
| notice: saturating the converting enzyme does not make total exposure jump, | |
| because mass balance fixes it - almost all the prodrug converts either way. | |
| What saturation changes is the shape: | |
| Km | 10.00: tenfold D raises Cmax x 7.84 and Tmax x 1.18 |
| Km | 0.05: tenfold D raises Cmax x 3.49 and Tmax x 6.40 |
| Unsaturated, a tenfold rise in D raises the peak almost tenfold and | |
| barely moves its timing. Saturated, the peak rises only 3.5-fold while | |
| the time to peak stretches more than sixfold: the same total amount is | |
| delivered more slowly and more flatly. So a saturable step BLUNTS the |
核心公式
查看完整验算程序
# Chapter 2. A prodrug converted by a saturable enzyme, in dimensionless
# units. An ester prodrug A is hydrolysed to the active species P, which is
# then eliminated:
# dA/dt = -Vmax A / (Km + A) - ka_loss A
# dP/dt = +Vmax A / (Km + A) - kel P
# Concentrations are in units of Km_ref (an arbitrary reference), time in
# units of the elimination half-life of P. NO mass, dose, product, route or
# source appears anywhere in this book; D below is a dose FRACTION relative to
# an unspecified reference exposure. The point is a distinction that is easy
# to get wrong. Saturation of the converting step does NOT make total exposure
# disproportionate: almost all of the prodrug converts eventually either way,
# and mass balance fixes the area under the curve. What saturation changes is
# the SHAPE - the peak and the time to peak - because a saturated enzyme works
# at a fixed rate and spreads the same total conversion over a longer time. So
# the common claim that a saturable prodrug step makes exposure "jump" at
# higher amounts is wrong for total exposure and right for the peak. Which
# regime applies depends on Km, which for the compounds at issue has not been
# measured in humans (Chapter 2 text).
import math
DT, T_END = 0.001, 12.0
KEL = math.log(2.0) # time unit = elimination half-life of P
KA_LOSS = 0.05 # competing loss of unconverted prodrug
def simulate(D, Km, Vmax=1.0):
A, P = D, 0.0
peak, tpeak, auc = 0.0, 0.0, 0.0
n = int(T_END / DT)
for i in range(n):
conv = Vmax * A / (Km + A)
dA = -conv - KA_LOSS * A
dP = conv - KEL * P
A = max(0.0, A + DT * dA)
P = max(0.0, P + DT * dP)
auc += P * DT
if P > peak:
peak, tpeak = P, (i + 1) * DT
return peak, tpeak, auc
if __name__ == "__main__":
print(
"Dimensionless prodrug model. Time unit = elimination half-life of"
" the active"
)
print(
"species; concentrations in units of a reference Km. D is a dose"
" FRACTION.\n"
)
print("A. Km = 10 (prodrug far below saturation: first-order regime)")
print(" D Cmax Tmax AUC AUC / D")
base = None
for D in (0.1, 0.2, 0.5, 1.0, 2.0, 5.0):
pk, tp, auc = simulate(D, Km=10.0)
print(
" {:6.2f} {:9.4f} {:9.3f} {:9.4f} {:9.4f}".format(
D, pk, tp, auc, auc / D
)
)
print(
"\nB. Km = 0.05 (enzyme saturated at these amounts: zero-order"
" regime)"
)
print(" D Cmax Tmax AUC AUC / D")
for D in (0.1, 0.2, 0.5, 1.0, 2.0, 5.0):
pk, tp, auc = simulate(D, Km=0.05)
print(
" {:6.2f} {:9.4f} {:9.3f} {:9.4f} {:9.4f}".format(
D, pk, tp, auc, auc / D
)
)
print(
"\nAUC / D is nearly constant in BOTH regimes, and that is the first"
" thing to"
)
print(
"notice: saturating the converting enzyme does not make total"
" exposure jump,"
)
print(
"because mass balance fixes it - almost all the prodrug converts"
" either way."
)
print("What saturation changes is the shape:")
for Km in (10.0, 0.05):
r1 = simulate(0.5, Km)
r2 = simulate(5.0, Km)
print(
" Km = {:5.2f}: tenfold D raises Cmax x {:.2f} and Tmax"
" x {:.2f}".format(Km, r2[0] / r1[0], r2[1] / r1[1])
)
print(
" Unsaturated, a tenfold rise in D raises the peak almost"
" tenfold and"
)
print(
" barely moves its timing. Saturated, the peak rises only 3.5-fold"
" while"
)
print(
" the time to peak stretches more than sixfold: the same total"
" amount is"
)
print(
" delivered more slowly and more flatly. So a saturable step"
" BLUNTS the"
)
print(
" peak rather than amplifying exposure - the opposite of what the"
" common"
)
print(" account of prodrug saturation suggests.")
print(
"\nC. The quantity that is NOT known: Km. Sweeping it over three"
" orders of"
)
print("magnitude at a FIXED dose fraction D = 1.0:")
print(
" Km Cmax Tmax AUC fraction of prodrug"
" converted"
)
for Km in (0.01, 0.05, 0.2, 1.0, 5.0, 20.0):
pk, tp, auc = simulate(1.0, Km)
# mass balance: AUC*kel = total P formed
conv_frac = auc * KEL
print(" {:7.2f} {:9.4f} {:9.3f} {:9.4f} {:20.3f}"
.format(Km, pk, tp, auc, conv_frac))
lo = simulate(1.0, 0.01)
hi = simulate(1.0, 20.0)
print(
"\n Across that range Cmax varies by a factor of {:.2f} and Tmax by"
" {:.2f},".format(
max(lo[0], hi[0]) / min(lo[0], hi[0]),
max(lo[1], hi[1]) / min(lo[1], hi[1]),
)
)
print(
" at the SAME dose fraction. So without a measured Km the model"
" cannot"
)
print(
" predict either the peak or its timing, even in these arbitrary"
" units."
)
print(
" Chapter 2 argues that this is the actual state of knowledge"
" for the"
)
print(
" prodrugs in question: no published human conversion kinetics"
" exist, so"
)
print(
" any such curve is parameterised by assumption, not by"
" measurement."
)唯一数据源与引用
范雅福(Fan, Y.). (2026). 《亚知觉色胺药代动力学、5-HT2A 受体脱敏与神经可塑性窗口的生物数学模型》第 2 章「前药与饱和转化:饱和削平峰值」(版本 1.0.0). 5D Library. https://doi.org/10.5281/zenodo.24019347
DOI: 10.5281/zenodo.24019347 · 阅读本章所在专著 · 5DL-B-054 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026054,
author = {Fan, Yafu},
title = {Biomathematical Models of Sub-Perceptual Tryptamine Pharmacokinetics, 5-HT2A Receptor Desensitisation and Neuroplastic Window Dynamics},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
doi = {10.5281/zenodo.24019347},
url = {https://doi.org/10.5281/zenodo.24019347}
}