关于「角鲨烯的六个双键:皮肤摄取、微间隙浓度与过氧化份额」,《玻璃电极放电与臭氧暴露》给出的定量结论是什么?
结论:第五章计算微间隙内的局部浓度,参考情形下间隙生成的臭氧有 0.5256 直接落到皮肤上,局部剂量是呼吸途径的 234 倍。
数据口径:书中参数为示意;全部计算由书中程序生成;本书不是医疗建议,不宣称任何健康或美容功效。 第六章把三条公开限值合成停留上限表,源强上限为每小时 4.04 毫克,四万次抽样中有 0.0454 超过器械上限。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 0.5256
| lateral residence time tau = 0.0665 s | |||
| h mm | gamma | share to skin | mean gap ppm |
| 0.1 | 1e-05 | 0.3756 | 5190 |
| 0.1 | 1e-04 | 0.8555 | 1201 |
| 0.1 | 1e-03 | 0.9808 | 159 |
| 0.3 | 1e-05 | 0.1666 | 2309 |
| 0.3 | 1e-04 | 0.6561 | 953 |
| 0.3 | 1e-03 | 0.9291 | 196 |
| 0.5 | 1e-05 | 0.1067 | 1485 |
| 0.5 | 1e-04 | 0.5256 | 789 |
| 0.5 | 1e-03 | 0.8651 | 224 |
| 1.0 | 1e-05 | 0.0560 | 785 |
| 1.0 | 1e-04 | 0.3402 | 548 |
| 1.0 | 1e-03 | 0.6916 | 256 |
| reference gap 0.5 mm, gamma 1e-4: 0.5256 of 416 ug per 10 min | |||
| ozone delivered to the spot: 218.86 ug |
查看完整验算程序
# Chapter 5. p52: ozone inside the micro-gap itself. One-dimensional
# steady Fick model across a gap of height h between inert glass
# (z = 0, no flux) and skin (z = h, flux v_s*C). Ozone is made
# uniformly at rate S and leaves sideways with a residence time
# tau = R^2/(8D) of a disc of radius R. With m = 1/sqrt(D*tau):
# C(z) = S*tau + a*cosh(m*z),
# a = -v_s*S*tau / (D*m*sinh(m*h) + v_s*cosh(m*h)).
# Printed: share of the ozone made that reaches the skin, and the mean
# gap concentration. q = 0.694 ug/s (p31), R = 3 mm (p21),
# D = 0.1692 cm^2/s (p41), <v> = 362.6 m/s (p51). Illustrative.
import math
Q, R_SPOT, D, VBAR = 0.694e-6, 3.0e-3, 0.1692e-4, 362.6
PPM = 48.00 / 24.45 * 1e-3 # g/m^3 per ppm
TAU = R_SPOT ** 2 / (8.0 * D)
def gap(h, gam):
s = Q / (math.pi * R_SPOT ** 2 * h)
vs = gam * VBAR / 4.0
m = 1.0 / math.sqrt(D * TAU)
a = -vs * s * TAU / (D * m * math.sinh(m * h)
+ vs * math.cosh(m * h))
c_wall = s * TAU + a * math.cosh(m * h)
c_mean = s * TAU + a * math.sinh(m * h) / (m * h)
return vs * c_wall / (s * h), c_mean / PPM
print("lateral residence time tau = {:.4f} s".format(TAU))
print(" h mm gamma share to skin mean gap ppm")
for h_mm in (0.1, 0.3, 0.5, 1.0):
for gam in (1e-5, 1e-4, 1e-3):
f, c = gap(h_mm / 1000.0, gam)
print("{:5.1f} {:6.0e} {:13.4f} {:13.0f}".format(
h_mm, gam, f, c))
f, c = gap(0.5e-3, 1e-4)
print("reference gap 0.5 mm, gamma 1e-4: {:.4f} of {:.0f} ug per"
" 10 min".format(f, Q * 600.0 * 1e6))
print("ozone delivered to the spot: {:.2f} ug".format(
f * Q * 600.0 * 1e6))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《玻璃电极辉光放电电离层、微间隙臭氧菲克扩散与角质层脂质过氧化安全阈值》第 5 章「角鲨烯的六个双键:皮肤摄取、微间隙浓度与过氧化份额」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-168 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026168,
author = {Fan, Yafu},
title = {Glow-Discharge Ionisation in Glass Electrodes, Micro-Gap Ozone Diffusion and Safety Thresholds for Stratum-Corneum Lipid Peroxidation},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}