关于「每千瓦时几克:臭氧产率、氧原子的去向与火花里的一氧化氮」,《玻璃电极放电与臭氧暴露》给出的定量结论是什么?
结论:第三章把功率换成臭氧通量,参考情形为每小时 2.50 毫克,并用余辉模型说明火花产生的一氧化氮会把臭氧滴定成二氧化氮:一氧化氮与氧原子等量时,一百毫秒后只剩 0.157。
数据口径:书中参数为示意;全部计算由书中程序生成;本书不是医疗建议,不宣称任何健康或美容功效。 第六章把三条公开限值合成停留上限表,源强上限为每小时 4.04 毫克,四万次抽样中有 0.0454 超过器械上限。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 与结论吻合的打印值: 2.50
| thermodynamic ceiling | 1211 g/kWh (1.48 eV per molecule) |
| yield | 1 g/kWh = 1790.9 eV per molecule, 0.0008 of the ceiling |
| yield | 5 g/kWh = 358.2 eV per molecule, 0.0041 of the ceiling |
| yield | 20 g/kWh = 89.5 eV per molecule, 0.0165 of the ceiling |
| yield | 100 g/kWh = 17.9 eV per molecule, 0.0826 of the ceiling |
| ozone flux in mg/h (micrograms per second in brackets) | |
| P W Y | 1 Y=5 Y=20 Y=60 |
| 0.05 | 0.050 ( 0.014) 0.250 ( 0.069) 1.000 ( 0.278) 3.000 ( 0.833) |
| 0.20 | 0.200 ( 0.056) 1.000 ( 0.278) 4.000 ( 1.111) 12.000 ( 3.333) |
| 0.50 | 0.500 ( 0.139) 2.500 ( 0.694) 10.000 ( 2.778) 30.000 ( 8.333) |
| 1.00 | 1.000 ( 0.278) 5.000 ( 1.389) 20.000 ( 5.556) 60.000 (16.667) |
| 2.00 | 2.000 ( 0.556) 10.000 ( 2.778) 40.000 (11.111) 120.000 (33.333) |
| reference case used later: P | 0.5 W, Y = 5 g/kWh -> 2.50 mg/h, 0.694 ug/s |
| molecules per second | 8.713e+12 |
查看完整验算程序
# Chapter 3. p31: from discharge power and ozone yield to an ozone
# flux. q = Y * P, with Y in g/kWh. The thermodynamic ceiling uses
# the standard enthalpy of formation of ozone, 142.7 kJ/mol; the energy
# spent per molecule at a given yield is printed in eV. The yields and
# powers in the table are illustrative; the powers bracket the mean
# gap power of p22 (0.037 to 0.584 W).
M_O3 = 48.00 # g/mol
DH_O3 = 142.7e3 # J/mol
NA = 6.02214076e23
EV = 1.602176634e-19
KWH = 3.6e6 # J
ceiling = KWH / DH_O3 * M_O3
print("thermodynamic ceiling: {:.0f} g/kWh ({:.2f} eV per molecule)"
.format(ceiling, DH_O3 / NA / EV))
for y in (1.0, 5.0, 20.0, 100.0):
per = KWH / (y / M_O3 * NA) / EV
print("yield {:5.0f} g/kWh = {:7.1f} eV per molecule, {:.4f} of the"
" ceiling".format(y, per, y / ceiling))
print("ozone flux in mg/h (micrograms per second in brackets)")
print(" P W Y=1 Y=5 Y=20 Y=60")
for p in (0.05, 0.2, 0.5, 1.0, 2.0):
cells = []
for y in (1.0, 5.0, 20.0, 60.0):
mg_h = y * p # g/kWh * W = mg/h
cells.append("{:7.3f} ({:6.3f})".format(mg_h, mg_h / 3.6))
print("{:4.2f} {}".format(p, " ".join(cells)))
mg_h = 5.0 * 0.5
print("reference case used later: P = 0.5 W, Y = 5 g/kWh ->"
" {:.2f} mg/h, {:.3f} ug/s".format(mg_h, mg_h / 3.6))
print("molecules per second: {:.3e}".format(mg_h / 3.6e9 / M_O3 * NA))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《玻璃电极辉光放电电离层、微间隙臭氧菲克扩散与角质层脂质过氧化安全阈值》第 3 章「每千瓦时几克:臭氧产率、氧原子的去向与火花里的一氧化氮」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-168 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026168,
author = {Fan, Yafu},
title = {Glow-Discharge Ionisation in Glass Electrodes, Micro-Gap Ozone Diffusion and Safety Thresholds for Stratum-Corneum Lipid Peroxidation},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}