What does Soil Couples, Copper Antennas and Electroculture Trials conclude, in numbers, about “Gauss's Law and Air Conductivity: How Much Current a Copper Rod Collects from the Fair-Weather Field”?
Answer: Chapter 3 starts from Gauss's law and Ohm's law in air and uses the method of moments to find, for a two-metre copper rod, a short-circuit current of 4.882 picoamperes and a maximum power of 0.114 nanowatts; a spiral outline brings the power at most to 1.40 times that of a straight rod.
Scope of the numbers: Its parameters are illustrative; all calculations are generated by its programs; the book is not agronomic or investment advice and judges no brand. Chapter 1 uses the Nernst equation to find an open-circuit voltage of about 1.0734 volts for a copper-zinc couple in an illustrative soil solution and shows that its energy comes from corroding zinc.
Data table
The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 0.114, 4.882
| rod h = 2.0 m, a = 5.0 mm, 60 segments | |
| induced charge, grounded | |Q0| = 2161.3 pC |
| capacitance, isolated | C = 23.09 pF |
| short-circuit current | I_sc = 4.882 pA |
| open-circuit voltage | V_oc = 93.6 V |
| internal resistance | R_int = 19.2 TOhm |
| matched power I_sc V_oc / 4 | = 0.114 nW |
| capture area I_sc / J | = 2.44 m2 |
| slender-body check pi eps0 E0 h^2 / (ln(2h/a) - 1): 1957.3 pC | |
| load 10^3 | Ohm: current 4.882 pA, power 2.38 x 10^-20 W |
| load 10^6 | Ohm: current 4.882 pA, power 2.38 x 10^-17 W |
| load 10^9 | Ohm: current 4.882 pA, power 2.38 x 10^-14 W |
| load 10^12 Ohm: current 4.640 pA, power 2.15 x 10^-11 W |
Show the full program
# Chapter 3. p32: method of moments for a grounded vertical copper rod
# in the fair-weather field; collected current I = sigma |Q| / eps0.
# The rod (height h, radius a) is cut into N segments of uniform line
# charge with images below the ground plane; the reduced thin-wire
# kernel is solved by Gaussian elimination. Grounded in the field it
# carries Q0; isolated it has capacitance C, so it is a current source
# I_sc = sigma |Q0| / eps0 with internal resistance eps0 / (sigma C),
# open-circuit voltage Q0 / C and matched power I_sc V_oc / 4.
# E0 = 100 V/m and sigma = 2e-14 S/m as in p31; h = 2 m and a = 5 mm
# are illustrative.
import math
EPS0 = 8.8541878128e-12
E0, SIG = 100.0, 2e-14
def kern(z, z1, z2, a):
u2, u1 = z2 - z, z1 - z
return math.log((u2 + math.hypot(u2, a)) / (u1 + math.hypot(u1, a)))
def solve(m, b):
n = len(b)
m = [row[:] + [b[i]] for i, row in enumerate(m)]
for c in range(n):
p = max(range(c, n), key=lambda r: abs(m[r][c]))
m[c], m[p] = m[p], m[c]
for r in range(c + 1, n):
f = m[r][c] / m[c][c]
for k in range(c, n + 1):
m[r][k] -= f * m[c][k]
x = [0.0] * n
for r in range(n - 1, -1, -1):
acc = math.fsum(m[r][k] * x[k] for k in range(r + 1, n))
x[r] = (m[r][n] - acc) / m[r][r]
return x
def rod(h, a, n=60):
dz = h / n
zs = [(i + 0.5) * dz for i in range(n)]
k = 1.0 / (4.0 * math.pi * EPS0)
mat = [[k * (kern(z, j * dz, j * dz + dz, a)
- kern(z, -j * dz - dz, -j * dz, a)) for j in range(n)]
for z in zs]
lam_g = solve(mat, [-E0 * z for z in zs])
lam_c = solve(mat, [1.0] * n)
q0 = abs(math.fsum(lam_g) * dz)
c = math.fsum(lam_c) * dz
return q0, c
if __name__ == "__main__":
h, a = 2.0, 0.005
q0, c = rod(h, a)
isc = SIG * q0 / EPS0
voc = q0 / c
rint = EPS0 / (SIG * c)
print("rod h = {} m, a = {} mm, 60 segments".format(h, 1e3 * a))
print("induced charge, grounded |Q0| = {:.1f} pC".format(1e12 * q0))
print("capacitance, isolated C = {:.2f} pF".format(1e12 * c))
print("short-circuit current I_sc = {:.3f} pA".format(1e12 * isc))
print("open-circuit voltage V_oc = {:.1f} V".format(voc))
print("internal resistance R_int = {:.1f} TOhm"
.format(rint / 1e12))
print("matched power I_sc V_oc / 4 = {:.3f} nW"
.format(1e9 * isc * voc / 4.0))
print("capture area I_sc / J = {:.2f} m2"
.format(isc / (SIG * E0)))
lam = math.log(2.0 * h / a)
q_sb = math.pi * EPS0 * E0 * h * h / (lam - 1.0)
print("slender-body check pi eps0 E0 h^2 / (ln(2h/a) - 1): {:.1f} pC"
.format(1e12 * q_sb))
for ex in (3, 6, 9, 12):
r_load = 10.0 ** ex
i = voc / (rint + r_load)
m, e = "{:.2e}".format(i * i * r_load).split("e")
print("load 10^{:<2d} Ohm: current {:.3f} pA, power {} x 10^{} W"
.format(ex, 1e12 * i, m, int(e)))Single source and citation
Fan, Y. (2026). Nernst Potentials in Soil Electrochemistry, Nanowatt Harvest Limits of Passive Copper Antennas and Field Block Designs for Electroculture Yield Claims (Version 1.0.0), Chapter 3: Gauss's Law and Air Conductivity: How Much Current a Copper Rod Collects from the Fair-Weather Field. 5D Library. DOI pending
DOI pending · monograph page goes live after publication · 5DL-B-170 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026170,
author = {Fan, Yafu},
title = {Nernst Potentials in Soil Electrochemistry, Nanowatt Harvest Limits of Passive Copper Antennas and Field Block Designs for Electroculture Yield Claims},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}Other chapter answers in this book
- Chapter 1 · The Nernst Equation: Open-Circuit Voltages of Copper-Zinc and Copper-Iron Couples in Soil Solution
- Chapter 2 · Internal Resistance, Oxygen Diffusion and the Maximum Power $V^2/4R$: What a Soil Couple Can Deliver
- Chapter 4 · Faraday's Law and Poynting's Theorem: What a Still Coil, the Geomagnetic Field and Radio Waves Can Give a Field
- Chapter 5 · The Energy Ledger: Electroculture Power as a Share of Photosynthetically Active Radiation, and Zinc as a Confounder
- Chapter 6 · Testing in the Field: Randomised Blocks, Split Plots, Power Analysis and Guard Strips
- Chapter 7 · Reading the Sources: Chen Fu's "Fitness of Terrain" and the Electroculture Trials of Lemström and Blackman
- Chapter 8 · Practice and Falsification: A Farm Owner's Checklist, a Copy Checker and a Pre-Registered Split-Plot Trial