关于「高斯定律与空气电导:一根铜杆在晴天大气电场里能收集多少电流」,《土壤电偶、铜杆天线与电耕试验》给出的定量结论是什么?
结论:第三章从高斯定律与空气中的欧姆定律出发,用矩量法算出两米铜杆的短路电流 4.882 皮安、最大功率 0.114 纳瓦,螺旋外形最多使功率达到直杆的 1.40 倍。
数据口径:书中参数为示意;全部计算由书中程序生成;本书不是农艺或投资建议,不评价任何品牌。 第一章用能斯特方程算出铜–锌电偶在示意土壤溶液中的开路电压约 1.0734 伏,并说明其能量来自锌的腐蚀。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 0.114, 4.882
| rod h = 2.0 m, a = 5.0 mm, 60 segments | |
| induced charge, grounded | |Q0| = 2161.3 pC |
| capacitance, isolated | C = 23.09 pF |
| short-circuit current | I_sc = 4.882 pA |
| open-circuit voltage | V_oc = 93.6 V |
| internal resistance | R_int = 19.2 TOhm |
| matched power I_sc V_oc / 4 | = 0.114 nW |
| capture area I_sc / J | = 2.44 m2 |
| slender-body check pi eps0 E0 h^2 / (ln(2h/a) - 1): 1957.3 pC | |
| load 10^3 | Ohm: current 4.882 pA, power 2.38 x 10^-20 W |
| load 10^6 | Ohm: current 4.882 pA, power 2.38 x 10^-17 W |
| load 10^9 | Ohm: current 4.882 pA, power 2.38 x 10^-14 W |
| load 10^12 Ohm: current 4.640 pA, power 2.15 x 10^-11 W |
查看完整验算程序
# Chapter 3. p32: method of moments for a grounded vertical copper rod
# in the fair-weather field; collected current I = sigma |Q| / eps0.
# The rod (height h, radius a) is cut into N segments of uniform line
# charge with images below the ground plane; the reduced thin-wire
# kernel is solved by Gaussian elimination. Grounded in the field it
# carries Q0; isolated it has capacitance C, so it is a current source
# I_sc = sigma |Q0| / eps0 with internal resistance eps0 / (sigma C),
# open-circuit voltage Q0 / C and matched power I_sc V_oc / 4.
# E0 = 100 V/m and sigma = 2e-14 S/m as in p31; h = 2 m and a = 5 mm
# are illustrative.
import math
EPS0 = 8.8541878128e-12
E0, SIG = 100.0, 2e-14
def kern(z, z1, z2, a):
u2, u1 = z2 - z, z1 - z
return math.log((u2 + math.hypot(u2, a)) / (u1 + math.hypot(u1, a)))
def solve(m, b):
n = len(b)
m = [row[:] + [b[i]] for i, row in enumerate(m)]
for c in range(n):
p = max(range(c, n), key=lambda r: abs(m[r][c]))
m[c], m[p] = m[p], m[c]
for r in range(c + 1, n):
f = m[r][c] / m[c][c]
for k in range(c, n + 1):
m[r][k] -= f * m[c][k]
x = [0.0] * n
for r in range(n - 1, -1, -1):
acc = math.fsum(m[r][k] * x[k] for k in range(r + 1, n))
x[r] = (m[r][n] - acc) / m[r][r]
return x
def rod(h, a, n=60):
dz = h / n
zs = [(i + 0.5) * dz for i in range(n)]
k = 1.0 / (4.0 * math.pi * EPS0)
mat = [[k * (kern(z, j * dz, j * dz + dz, a)
- kern(z, -j * dz - dz, -j * dz, a)) for j in range(n)]
for z in zs]
lam_g = solve(mat, [-E0 * z for z in zs])
lam_c = solve(mat, [1.0] * n)
q0 = abs(math.fsum(lam_g) * dz)
c = math.fsum(lam_c) * dz
return q0, c
if __name__ == "__main__":
h, a = 2.0, 0.005
q0, c = rod(h, a)
isc = SIG * q0 / EPS0
voc = q0 / c
rint = EPS0 / (SIG * c)
print("rod h = {} m, a = {} mm, 60 segments".format(h, 1e3 * a))
print("induced charge, grounded |Q0| = {:.1f} pC".format(1e12 * q0))
print("capacitance, isolated C = {:.2f} pF".format(1e12 * c))
print("short-circuit current I_sc = {:.3f} pA".format(1e12 * isc))
print("open-circuit voltage V_oc = {:.1f} V".format(voc))
print("internal resistance R_int = {:.1f} TOhm"
.format(rint / 1e12))
print("matched power I_sc V_oc / 4 = {:.3f} nW"
.format(1e9 * isc * voc / 4.0))
print("capture area I_sc / J = {:.2f} m2"
.format(isc / (SIG * E0)))
lam = math.log(2.0 * h / a)
q_sb = math.pi * EPS0 * E0 * h * h / (lam - 1.0)
print("slender-body check pi eps0 E0 h^2 / (ln(2h/a) - 1): {:.1f} pC"
.format(1e12 * q_sb))
for ex in (3, 6, 9, 12):
r_load = 10.0 ** ex
i = voc / (rint + r_load)
m, e = "{:.2e}".format(i * i * r_load).split("e")
print("load 10^{:<2d} Ohm: current {:.3f} pA, power {} x 10^{} W"
.format(ex, 1e12 * i, m, int(e)))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《土壤电化学能斯特电势、铜棒无源天线纳瓦级收集极限与电耕增产声称的田间区组设计》第 3 章「高斯定律与空气电导:一根铜杆在晴天大气电场里能收集多少电流」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-170 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026170,
author = {Fan, Yafu},
title = {Nernst Potentials in Soil Electrochemistry, Nanowatt Harvest Limits of Passive Copper Antennas and Field Block Designs for Electroculture Yield Claims},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}