What does Soil Couples, Copper Antennas and Electroculture Trials conclude, in numbers, about “Practice and Falsification: A Farm Owner's Checklist, a Copy Checker and a Pre-Registered Split-Plot Trial”?

Answer: Chapter 8 gives an operator's checklist, a copy checker and a pre-registered split-plot protocol: detecting a gain of a tenth needs about 5320 square metres. Marked boxes separate published evidence, runnable Python calculations (18 programs), classical sources and the author's hypotheses.

Scope of the numbers: Its parameters are illustrative; all calculations are generated by its programs; the book is not agronomic or investment advice and judges no brand. Chapter 1 uses the Nernst equation to find an open-circuit voltage of about 1.0734 volts for a copper-zinc couple in an illustrative soil solution and shows that its energy comes from corroding zinc.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 5320

effectblockst critpowerplotsarea m2
10%62.5710.4015362280
10%82.3650.5445483040
10%102.2620.6680603800
10%122.2010.7570724560
10%142.1600.8375845320
10%162.1310.8840966080
5%322.0400.627519212160
5%402.0230.730024015200
5%442.0170.779526416720
5%482.0120.819528818240
5%562.0040.888033621280
SD of a block difference in main-plot means: 0.1178
effect 10%: normal formula 10.9 blocks; simulated power 0.8 at 14
effect 5%: normal formula 43.5 blocks; simulated power 0.8 at 48
Show the full program
# Chapter 8. p81: sample size for the pre-registered split-plot trial.
# Main plots: rod or no rod; subplots: no zinc, zinc salt matched to
# the galvanic release of p52, double zinc.  The rod effect is tested
# on main-plot means with r - 1 degrees of freedom (a paired t test
# on block differences, identical to F(1, r-1)).  Effect to detect
# as below; main-plot SD 0.08 and subplot SD 0.04 (illustrative).
# Effects of 10 and 5 percent; power by fixed-seed Monte Carlo, 2000
# trials per row; 2.8016 = 1.9600 + 0.8416 for the normal formula.
# Field area uses 5 m x 6 m subplots and the 4 m guard strip of p63.
import math
import random
import statistics


def betacf(a, b, x):
    qab, qap, qam = a + b, a + 1.0, a - 1.0
    c, d = 1.0, 1.0 - qab * x / qap
    d = 1.0 / (d if abs(d) > 1e-300 else 1e-300)
    h = d
    for m in range(1, 300):
        m2 = 2 * m
        for aa in (m * (b - m) * x / ((qam + m2) * (a + m2)),
                   -(a + m) * (qab + m) * x / ((a + m2) * (qap + m2))):
            d = 1.0 + aa * d
            d = 1.0 / (d if abs(d) > 1e-300 else 1e-300)
            c = 1.0 + aa / c
            c = c if abs(c) > 1e-300 else 1e-300
            h *= d * c
        if abs(d * c - 1.0) < 1e-14:
            break
    return h


def t_crit(df):
    lo, hi = 0.0, 50.0
    for _ in range(100):
        t = (lo + hi) / 2.0
        x = df / (df + t * t)
        lb = (math.lgamma(df / 2.0 + 0.5) - math.lgamma(df / 2.0)
              - math.lgamma(0.5) + df / 2.0 * math.log(x)
              + 0.5 * math.log(1.0 - x))
        if x < (df / 2.0 + 1.0) / (df / 2.0 + 2.5):
            up = 0.5 * math.exp(lb) * betacf(df / 2.0, 0.5, x) / (df / 2.0)
        else:
            up = 0.5 * (1.0 - math.exp(lb) * betacf(0.5, df / 2.0, 1.0 - x)
                        / 0.5)
        lo, hi = (t, hi) if up > 0.025 else (lo, t)
    return (lo + hi) / 2.0


SW, SE, B = 0.08, 0.04, 3
rng = random.Random(20261112)
print("effect  blocks  t crit   power   plots   area m2")
first = {}
for delta, grid in ((0.10, (6, 8, 10, 12, 14, 16)),
                    (0.05, (32, 40, 44, 48, 56))):
    for r in grid:
        crit = t_crit(r - 1)
        hit = 0
        for _ in range(2000):
            d = []
            for _ in range(r):
                m1 = delta + rng.gauss(0.0, SW) + statistics.fmean(
                    rng.gauss(0.0, SE) for _ in range(B))
                m0 = rng.gauss(0.0, SW) + statistics.fmean(
                    rng.gauss(0.0, SE) for _ in range(B))
                d.append(m1 - m0)
            t = statistics.fmean(d) / (statistics.stdev(d) / math.sqrt(r))
            hit += abs(t) > crit
        pw = hit / 2000
        if pw >= 0.8 and delta not in first:
            first[delta] = r
        area = r * 2 * (B * 5.0 + 4.0) * (6.0 + 4.0)
        print("{:5.0%}   {:5d}   {:6.3f}   {:.4f}  {:5d}   {:7.0f}"
              .format(delta, r, crit, pw, r * 2 * B, area))
sd_d = math.sqrt(2.0 * (SW ** 2 + SE ** 2 / B))
print("SD of a block difference in main-plot means: {:.4f}".format(sd_d))
for delta in (0.10, 0.05):
    n = 2.8016 ** 2 * sd_d ** 2 / delta ** 2
    print("effect {:.0%}: normal formula {:.1f} blocks; simulated power"
          " 0.8 at {}".format(delta, n, first.get(delta)))

Single source and citation

Fan, Y. (2026). Nernst Potentials in Soil Electrochemistry, Nanowatt Harvest Limits of Passive Copper Antennas and Field Block Designs for Electroculture Yield Claims (Version 1.0.0), Chapter 8: Practice and Falsification: A Farm Owner's Checklist, a Copy Checker and a Pre-Registered Split-Plot Trial. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-170 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026170,
  author    = {Fan, Yafu},
  title     = {Nernst Potentials in Soil Electrochemistry, Nanowatt Harvest Limits of Passive Copper Antennas and Field Block Designs for Electroculture Yield Claims},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book