What does Interoceptive Decoupling and Autonomic Restoration conclude, in numbers, about “How Much Can Blood Flow Change: The Fourth Power and Autoregulation”?

Answer: Even granting that vasoconstrictor drive really is withdrawn, the change in flow is doubly constrained. The fourth-power law: doubling flow needs a 18.9 % increase in radius, a 10 % rise needs 2.41 %, and paired measurement with a 12 % coefficient of variation over 20 pairs detects only a +11.2 % change in flow. Parallel beds: at fixed pressure, local dilation requires total output to rise; at fixed cardiac output, the same dilation raises that bed only to 1.840-fold and presses the others to 0.920-fold. Autoregulation: flow-sensing regulation absorbs 34 % to 60 % of the steady-state response in this model, the approach is monotone with no overshoot, and the time constant makes the same manoeuvre read as +9 % at 5 s and +37 % at 60 s, so the time of measurement must be specified in advance. Finally, "a change in flow" and "repair of tissue" are two different things, the second requiring a chain of premises this book cannot evidence; and a mechanical pathway through pelvic-floor and abdominal-wall tone is an alternative this book does not exclude, and which Chapter 8 must therefore match.

Scope of the numbers: Marked boxes separate published evidence, runnable Python calculations (16 programs), classical sources and the author's models and hypotheses; apart from cited literature data, all data in the book are synthetic.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 0.920, 1.840, 10, 11.2, 12, 18.9

A. one tube, fixed driving pressure: Q proportional to r^4
radius change flow ratio
-20%0.410
-10%0.656
-5%0.815
+0%1.000
+5%1.216
+10%1.464
+19%2.005
+30%2.856
a doubling of flow needs r x 1.1892, i.e. +18.9%
a 10 % flow rise needs r x 1.0241, i.e. +2.41%
B. five parallel beds, conductance of the first bed multiplied by k
mean pressure held constant:
k pressure bed-1 flow other beds bed-1 share
1.090.0 1.000 1.000 8.7%
1.590.0 1.500 1.000 12.5%
2.090.0 2.000 1.000 16.0%
3.090.0 3.000 1.000 22.2%
5.090.0 5.000 1.000 32.3%
cardiac output held constant:
k pressure bed-1 flow other beds bed-1 share
1.090.0 1.000 1.000 8.7%
1.586.2 1.438 0.958 12.5%
2.082.8 1.840 0.920 16.0%
3.076.7 2.556 0.852 22.2%
5.066.8 3.710 0.742 32.3%
With pressure held constant, doubling the conductance of one small bed
Show the full program
# Chapter 5. What a change in vascular smooth-muscle tone can and cannot do to
# flow. Hagen-Poiseuille for a single tube: Q = pi r^4 dP / (8 mu L), so
# conductance scales as r^4 and a 19 % dilation doubles flow at fixed
# pressure. But organs are not single tubes at fixed pressure: they sit in
# parallel beds fed by a shared pressure, so dilating one bed raises total
# conductance, LOWERS perfusion pressure if cardiac output is fixed, and
# steals flow from the others. The program does both calculations and shows
# how different the answers are. Physiology-free algebra; illustrative
# numbers, not measurements.
import math

def q_single(ratio):
    """Flow relative to baseline for a radius ratio, fixed driving
    pressure."""

    return ratio ** 4

def radius_for_flow(fold):
    return fold ** 0.25

# parallel beds: conductances G_i (arbitrary units), one shared pump
BEDS = [("pelvic / visceral", 1.0), ("skeletal muscle", 3.0),
        ("splanchnic", 2.5), ("skin", 1.0), ("the rest", 4.0)]

def parallel(dilate_factor, fixed="output", co=1.0, map_mmHg=90.0):
    """dilate_factor multiplies the conductance of bed 0 only.
    fixed='output' holds cardiac output constant (pressure falls);
    fixed='pressure' holds mean pressure constant (output rises)."""
    g = [
        v * (dilate_factor if i == 0 else 1.0)
        for i, (_, v) in enumerate(BEDS)
    ]
    gt = math.fsum(g)
    if fixed == "pressure":
        p = map_mmHg
        flows = [p * x for x in g]
    else:
        p = co * map_mmHg * math.fsum(v for _, v in BEDS) / gt
        flows = [p * x for x in g]
    return p, flows, gt

if __name__ == "__main__":
    print("A. one tube, fixed driving pressure: Q proportional to r^4")
    print("   radius change   flow ratio")
    for d in (-0.20, -0.10, -0.05, 0.0, 0.05, 0.10, 0.19, 0.30):
        print("   {:+12.0%} {:13.3f}".format(d, q_single(1 + d)))
    print("   a doubling of flow needs r x {:.4f}, i.e. {:+.1%}"
          .format(radius_for_flow(2.0), radius_for_flow(2.0) - 1))
    print("   a 10 % flow rise needs r x {:.4f}, i.e. {:+.2%}"
          .format(radius_for_flow(1.10), radius_for_flow(1.10) - 1))

    print(
        "\nB. five parallel beds, conductance of the first bed multiplied"
        " by k"
    )
    base_p, base_f, base_g = parallel(1.0)
    for fixed, label in (("pressure", "mean pressure held constant"),
                         ("output", "cardiac output held constant")):
        print("\n   {}:".format(label))
        print("      k     pressure   bed-1 flow   other beds   bed-1 share")
        for k in (1.0, 1.5, 2.0, 3.0, 5.0):
            p, f, gt = parallel(k, fixed=fixed)
            others = math.fsum(f[1:])
            print(
                "      {:4.1f} {:10.1f} {:12.3f} {:12.3f} {:12.1%}".format(
                    k,
                    p,
                    f[0] / base_f[0],
                    others / math.fsum(base_f[1:]),
                    f[0] / math.fsum(f),
                )
            )

    print(
        "\nWith pressure held constant, doubling the conductance of one"
        " small bed"
    )
    print(
        "doubles its flow and leaves the others alone, but total output must"
        " rise."
    )
    print(
        "With output held constant, the same dilation raises that bed's flow"
        " by much"
    )
    print(
        "less and takes flow from every other bed. Which calculation applies"
        " depends"
    )
    print(
        "on what the circulation actually does, and neither is settled by"
        " asserting"
    )
    print("that 'sympathetic tone was released'. Chapter 5 returns to this.")

    print(
        "\nC. how large a conductance change could a measurement even detect?"
    )
    print(
        "   If bed-1 flow is measured with a 12 % coefficient of"
        " variation, the"
    )
    print(
        "   smallest fold change detectable at 80 % power with n = 20 paired"
    )
    print("   observations is about:")
    cv, n = 0.12, 20
    # paired t test on log flow: detectable log difference = (1.96 + 0.84) *
    # cv*sqrt(2)/sqrt(n)
    d = (1.96 + 0.8416) * cv * math.sqrt(2) / math.sqrt(n)
    print("      {:+.1%} in flow, i.e. {:+.2%} in radius"
          .format(math.exp(d) - 1, math.exp(d) ** 0.25 - 1))

Single source and citation

Fan, Y. (2026). Interoceptive Decoupling, Salience-Network Switching and Autonomic Visceral Restoration (Version 1.0.0), Chapter 5: How Much Can Blood Flow Change: The Fourth Power and Autoregulation. 5D Library. https://doi.org/10.5281/zenodo.24020418

DOI: 10.5281/zenodo.24020418 · Read the monograph · 5DL-B-053 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026053,
  author    = {Fan, Yafu},
  title     = {Interoceptive Decoupling, Salience-Network Switching and Autonomic Visceral Restoration},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  doi       = {10.5281/zenodo.24020418},
  url       = {https://doi.org/10.5281/zenodo.24020418}
}

Other chapter answers in this book