What does Coacervate Scent Deposition and Skin-Feel Tribology conclude, in numbers, about “Skin-Feel Tribology: the Stribeck Curve, the Velvet Zone and the Feasible Region behind the Golden Ratio”?
Answer: Chapter 6 separates squeaky, velvety and falsely slippery films by the Hersey number and turns the golden ratio into a feasible region of 85 out of 1,440 grid formulas, with a charge ratio between about 0.0048 and 0.0087, each edge carrying a refutation condition.
Scope of the numbers: Parameters are illustrative and all calculations are generated by the book's programs. Chapter 5 covers the salt curve and wormlike micelles, and sets batches at the peak measured with perfume present (illustrative coefficient of variation 0.027).
Data table
The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 0.0048, 1440, 85
grid points 1,440 as stated feasible 85 Z 0.0048-0.0087 P0*q 0.125-0.300 distinct (S0, P0, q) skeletons 19 S0 10.0: points 45, P0*q 0.125-0.225, f max 1.50, R 0.01512-0.02282 S0 12.0: points 25, P0*q 0.150-0.250, f max 1.50, R 0.01657-0.02176 S0 14.0: points 15, P0*q 0.200-0.300, f max 1.50, R 0.01773-0.02003 R_min 0.02 feasible 28 Z 0.0058-0.0087 P0*q 0.150-0.300 band 0.2-0.8 feasible 144 Z 0.0048-0.0115 P0*q 0.125-0.312 band 0.4-0.6 feasible 50 Z 0.0048-0.0077 P0*q 0.125-0.225
Show the full program
# Chapter 6. p63: the "golden ratio" as a feasible region, not a point.
# Grid: total surfactant S0, polymer P0, charge density q, oil f.
# Constraints (all illustrative, the author's working thresholds):
# C1 window opens after the lather is diluted: D_in >= 3
# C2 retained share of a log P 4.5 material R >= 0.015 (p32 model)
# C3 peak viscosity with oil (p51 model, peak scaled with S0) within
# 5,000 to 12,000 mPa s
# C4 rinse film in the velvet band 0.3 <= lam <= 0.7 (p61 model);
# film viscosity eta = 0.001 + K_FILM * theta * P0 * (1 + K_B q)
# C5 mildness surrogate S0 <= 14; C6 oil f <= 1.5
import itertools
import math
S_RES, K_R, S_CAC, K_B = 1.5, 10.0, 0.02, 2.0
K_A, K_D, DELTA_MAX, DT = 2.0, 0.005, 0.15, 0.05
A_P, SWELL, R_DIR = 0.8, 0.05, 0.001
B_DROP, LP_OIL, K_FILM = 1.2, 3.5, 0.5
V, WLOAD, H1 = 0.05, 30.0, 2e-4
def theta_of(s0, p0, q):
if s0 - K_R * p0 * q <= S_RES:
return 0.0
d_in, d_out = (s0 - K_R * p0 * q) / S_RES, s0 / S_CAC
r, th = math.log(3000.0) / 60.0, 0.0
for k in range(int(round(60.0 / DT))):
d = math.exp(r * (k + 0.5) * DT)
c = 0.0
if d_in < d < d_out:
u = math.log(d / d_in) / math.log(d_out / d_in)
c = 4.0 * u * (1.0 - u) * p0 * (1.0 + K_B * q) / d
th += DT * (K_A * c * (1.0 - th) - K_D * th)
return th
def check(s0, p0, q, f, th, r_min=0.015, band=(0.3, 0.7)):
load = K_R * p0 * q
if s0 - load <= S_RES or (s0 - load) / S_RES < 3.0:
return False, 0.0
d_mid = math.sqrt((s0 - load) / S_RES * s0 / S_CAC)
phi_m = (s0 - load) / d_mid / 100.0
phi_c = p0 * (1.0 + K_B * q) / d_mid * SWELL
k = 10 ** (A_P * 4.5)
sh = phi_c * k / (1.0 - phi_m - phi_c + phi_m * k + phi_c * k)
r = DELTA_MAX * th * sh + R_DIR * 4.5
peak = 50.0 + 12000.0 * (s0 / 12.0) ** 2 * math.exp(-B_DROP * f
/ LP_OIL)
x = (0.001 + K_FILM * th * p0 * (1.0 + K_B * q)) * V / WLOAD / H1
lam = x * x / (1.0 + x * x)
ok = (r >= r_min and 5000.0 <= peak <= 12000.0
and band[0] <= lam <= band[1] and s0 <= 14.0 and f <= 1.5)
return ok, r
S0S = (8.0, 10.0, 12.0, 14.0, 16.0)
P0S = (0.05, 0.1, 0.15, 0.2, 0.25, 0.3, 0.4, 0.5)
QS = (0.5, 0.75, 1.0, 1.25, 1.5, 2.0)
FS = (0.5, 0.75, 1.0, 1.25, 1.5, 2.0)
TH = {(s, p, q): theta_of(s, p, q)
for s, p, q in itertools.product(S0S, P0S, QS)}
grid = list(itertools.product(S0S, P0S, QS, FS))
print("grid points {:,}".format(len(grid)))
for lab, kw in (("as stated", {}), ("R_min 0.02", {"r_min": 0.02}),
("band 0.2-0.8", {"band": (0.2, 0.8)}),
("band 0.4-0.6", {"band": (0.4, 0.6)})):
feas = [(s, p, q, f) for s, p, q, f in grid
if check(s, p, q, f, TH[(s, p, q)], **kw)[0]]
if not feas:
print("%-13s feasible 0" % lab)
continue
zs = [p * q / (s * 2.6) for s, p, q, _ in feas]
pq = [p * q for _, p, q, _ in feas]
print("%-13s feasible %3d Z %.4f-%.4f P0*q %.3f-%.3f"
% (lab, len(feas), min(zs), max(zs), min(pq), max(pq)))
if lab == "as stated":
skel = sorted({x[:3] for x in feas})
print(" distinct (S0, P0, q) skeletons %d" % len(skel))
for s0 in sorted({x[0] for x in skel}):
sub = [x for x in feas if x[0] == s0]
rs = [check(*x, TH[x[:3]])[1] for x in sub]
print(" S0 %4.1f: points %2d, P0*q %.3f-%.3f, f max %.2f,"
" R %.5f-%.5f"
% (s0, len(sub), min(p * q for _, p, q, _ in sub),
max(p * q for _, p, q, _ in sub),
max(x[3] for x in sub), min(rs), max(rs)))Single source and citation
Fan, Y. (2026). Dilution-Coacervation Fragrance Deposition, Surfactant-Polymer Golden Ratios and Skin-Feel Tribology in Luxury Body Wash (Version 1.0.0), Chapter 6: Skin-Feel Tribology: the Stribeck Curve, the Velvet Zone and the Feasible Region behind the Golden Ratio. 5D Library. DOI pending
DOI pending · monograph page goes live after publication · 5DL-B-388 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026388,
author = {Fan, Yafu},
title = {Dilution-Coacervation Fragrance Deposition, Surfactant-Polymer Golden Ratios and Skin-Feel Tribology in Luxury Body Wash},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}Other chapter answers in this book
- Chapter 1 · Dilution-Induced Coacervation: the Phase Map and the Dilution Path
- Chapter 2 · Deposition Kinetics: Langmuir Adsorption and the Length of the Rinse
- Chapter 3 · Fragrance Partition: log P, Micellar Competition and What Remains after Rinsing
- Chapter 4 · Top, Heart and Base Notes: Raoult Evaporation and the Power Law of Stevens
- Chapter 5 · Micellar Viscosity: the Salt Curve, Wormlike Micelles and the Leftward Shift Caused by Perfume
- Chapter 7 · Classical Sources: the Xiang Pu, the Neize of the Liji, Theophrastus and Pliny
- Chapter 8 · The Empirical Loop: the Formula and Skin-Feel Ledger, Field Tools and Checker Specifications