What does Coacervate Scent Deposition and Skin-Feel Tribology conclude, in numbers, about “Fragrance Partition: log P, Micellar Competition and What Remains after Rinsing”?

Answer: Fragrance materials fall into two groups by log P. Those below 2 leave almost entirely with the water, and the polymer barely helps them. Those above 4 can be carried onto skin by the coacervate, and with the polymer they are retained about 3.86 times as well as without it. Micelles and coacervate compete for the same fragrance, and more surfactant means less retention. The benefit of hydrophobicity is capped beyond a log P of about four by the volume ratio of coacervate to micelles.

Scope of the numbers: Parameters are illustrative and all calculations are generated by the book's programs. Chapter 5 covers the salt curve and wormlike micelles, and sets batches at the peak measured with perfume present (illustrative coefficient of variation 0.027).

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 3.86

mid-window D 63.2: phi_m 0.00158phi_c 0.000474
materiallogPwatermiccoacR polyR noneratio
cis-3-hexenol1.60.9620.0290.0090.002150.001601.34
limonene4.60.0920.6980.2100.017740.004603.86
linalool3.00.6590.2620.0790.007940.003002.65
phenylethyl alcohol1.40.9740.0200.0060.001780.001401.27
citronellol3.90.2690.5620.1690.014480.003903.71
hexyl cinnamal4.80.0660.7190.2160.018330.004803.82
benzyl salicylate4.30.1500.6540.1960.016610.004303.86
vanillin1.20.9820.0140.0040.001470.001201.22
Show the full program
# Chapter 3. p31: three-phase partition of eight fragrance materials at
# the middle of the coacervate window, and the share left after rinsing.
# log P and vapour pressure: rounded orders of magnitude of the kind
# found in public databases, used only as illustrations.
# Partition: K = 10 ** (A_P * logP) into both micelles and coacervate;
#   share_c = phi_c K / (phi_w + phi_m K + phi_c K)
# Retained after rinse: R = DELTA_MAX * theta * share_c + R_DIR * logP
#   (theta = 0.4182 from p21; R_DIR is bare-skin sorption, illustrative)
import math

S_RES, K_R, S_CAC, K_B = 1.5, 10.0, 0.02, 2.0
S0, P0, Q = 12.0, 0.2, 1.0
THETA, DELTA_MAX = 0.4182, 0.15
A_P, SWELL, R_DIR = 0.8, 0.05, 0.001
MATS = [("cis-3-hexenol", 1.6, 140.0), ("limonene", 4.6, 190.0),
        ("linalool", 3.0, 21.0), ("phenylethyl alcohol", 1.4, 11.0),
        ("citronellol", 3.9, 2.6), ("hexyl cinnamal", 4.8, 0.09),
        ("benzyl salicylate", 4.3, 0.02), ("vanillin", 1.2, 0.03)]

d_in = (S0 - K_R * P0 * Q) / S_RES
d_out = S0 / S_CAC
d_mid = math.sqrt(d_in * d_out)
free = S0 / d_mid - K_R * P0 * Q / d_mid
phi_m = free / 100.0
phi_c = P0 * (1.0 + K_B * Q) / d_mid * SWELL
phi_w = 1.0 - phi_m - phi_c


def shares(logp):
    k = 10 ** (A_P * logp)
    tot = phi_w + phi_m * k + phi_c * k
    return phi_w / tot, phi_m * k / tot, phi_c * k / tot


print("mid-window D %.1f: phi_m %.5f  phi_c %.6f" % (d_mid, phi_m, phi_c))
print("%-20s %4s %6s %6s %6s %8s %8s %6s" % (
    "material", "logP", "water", "mic", "coac", "R poly", "R none",
    "ratio"))
for name, lp, _vp in MATS:
    w, m, c = shares(lp)
    r_poly = DELTA_MAX * THETA * c + R_DIR * lp
    r_none = R_DIR * lp
    print("%-20s %4.1f %6.3f %6.3f %6.3f %8.5f %8.5f %6.2f"
          % (name, lp, w, m, c, r_poly, r_none, r_poly / r_none))

Single source and citation

Fan, Y. (2026). Dilution-Coacervation Fragrance Deposition, Surfactant-Polymer Golden Ratios and Skin-Feel Tribology in Luxury Body Wash (Version 1.0.0), Chapter 3: Fragrance Partition: log P, Micellar Competition and What Remains after Rinsing. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-388 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026388,
  author    = {Fan, Yafu},
  title     = {Dilution-Coacervation Fragrance Deposition, Surfactant-Polymer Golden Ratios and Skin-Feel Tribology in Luxury Body Wash},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book