What does Coacervate Scent Deposition and Skin-Feel Tribology conclude, in numbers, about “Deposition Kinetics: Langmuir Adsorption and the Length of the Rinse”?
Answer: The Langmuir-type rate equation shows that deposition from the illustrative formula is far from equilibrium. The window occupies 0.56 of the rinse, the coverage stops at 0.4182 and the deposited share is 0.0627. Rinsing habit can spread deposition by roughly a factor of three, and a higher polymer dose and charge density narrow the spread. Deposition is a kinetic problem, not an equilibrium one.
Scope of the numbers: Parameters are illustrative and all calculations are generated by the book's programs. Chapter 5 covers the salt curve and wormlike micelles, and sets batches at the peak measured with perfume present (illustrative coefficient of variation 0.027).
Data table
The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 0.0627, 0.4182
| base formula S0 12 wt%, polymer 0.2 wt%, q 1.0 meq/g | |
| rinse s in window theta delta | |
| 15 | 8.5 0.1508 0.0226 |
| 30 | 16.9 0.2661 0.0399 |
| 60 | 33.8 0.4182 0.0627 |
| 90 | 50.6 0.4993 0.0749 |
| 120 | 67.5 0.5366 0.0805 |
| theta after a 60 s rinse, by polymer dose and charge density: | |
| P0 \ q | 0.5 1.0 1.5 2.0 |
| 0.05 | 0.0790 0.1178 0.1561 0.1938 |
| 0.10 | 0.1533 0.2270 0.2981 0.3664 |
| 0.20 | 0.2884 0.4182 0.5348 0.6353 |
| 0.30 | 0.4057 0.5718 0.7023 0.7901 |
| 0.50 | 0.5902 0.7677 0.8417 0.8531 |
Show the full program
# Chapter 2. p21: Langmuir-type deposition while the rinse crosses the
# coacervate window. Illustrative kinetics (author's simplification):
# dilution D(t) = exp(r t), r = ln(D_END) / T (T = rinse seconds)
# coacervate c(D) from the p11/p12 window, yield 4u(1-u) in log D
# d(theta)/dt = K_A c (1 - theta) - K_D theta (Euler, dt 0.05 s)
# deposited share of the coacervate formed: delta = DELTA_MAX * theta
import math
S_RES, K_R, S_CAC, K_B = 1.5, 10.0, 0.02, 2.0
K_A = 2.0 # 1 / (wt % s), adsorption rate constant (illustrative)
K_D = 0.005 # 1 / s, rinse-off of adsorbed complex (illustrative)
DELTA_MAX = 0.15 # share of formed coacervate that can sit on skin
D_END, DT = 3000.0, 0.05
def coac(s0, p0, q, d):
load = K_R * p0 * q
if s0 <= load + S_RES:
return None
d_in, d_out = (s0 - load) / S_RES, s0 / S_CAC
if d <= d_in or d >= d_out:
return 0.0
u = (math.log(d) - math.log(d_in)) / (math.log(d_out) - math.log(d_in))
return 4.0 * u * (1.0 - u) * p0 * (1.0 + K_B * q) / d
def deposit(s0, p0, q, t_rinse):
r = math.log(D_END) / t_rinse
theta, n_in = 0.0, 0
for k in range(int(round(t_rinse / DT))):
c = coac(s0, p0, q, math.exp(r * (k + 0.5) * DT))
if c is None:
return None, None
if c > 0.0:
n_in += 1
theta += DT * (K_A * c * (1.0 - theta) - K_D * theta)
return theta, n_in * DT
print("base formula S0 12 wt%, polymer 0.2 wt%, q 1.0 meq/g")
print("%8s %10s %8s %10s" % ("rinse s", "in window", "theta", "delta"))
for t in (15, 30, 60, 90, 120):
th, ti = deposit(12.0, 0.2, 1.0, t)
print("%8d %10.1f %8.4f %10.4f" % (t, ti, th, DELTA_MAX * th))
print("theta after a 60 s rinse, by polymer dose and charge density:")
print("%8s %8s %8s %8s %8s" % ("P0 \\ q", "0.5", "1.0", "1.5", "2.0"))
for p0 in (0.05, 0.1, 0.2, 0.3, 0.5):
cells = []
for q in (0.5, 1.0, 1.5, 2.0):
th, _ = deposit(12.0, p0, q, 60)
cells.append("bottle2" if th is None else "%.4f" % th)
print("%8.2f %8s %8s %8s %8s" % ((p0,) + tuple(cells)))Single source and citation
Fan, Y. (2026). Dilution-Coacervation Fragrance Deposition, Surfactant-Polymer Golden Ratios and Skin-Feel Tribology in Luxury Body Wash (Version 1.0.0), Chapter 2: Deposition Kinetics: Langmuir Adsorption and the Length of the Rinse. 5D Library. DOI pending
DOI pending · monograph page goes live after publication · 5DL-B-388 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026388,
author = {Fan, Yafu},
title = {Dilution-Coacervation Fragrance Deposition, Surfactant-Polymer Golden Ratios and Skin-Feel Tribology in Luxury Body Wash},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}Other chapter answers in this book
- Chapter 1 · Dilution-Induced Coacervation: the Phase Map and the Dilution Path
- Chapter 3 · Fragrance Partition: log P, Micellar Competition and What Remains after Rinsing
- Chapter 4 · Top, Heart and Base Notes: Raoult Evaporation and the Power Law of Stevens
- Chapter 5 · Micellar Viscosity: the Salt Curve, Wormlike Micelles and the Leftward Shift Caused by Perfume
- Chapter 6 · Skin-Feel Tribology: the Stribeck Curve, the Velvet Zone and the Feasible Region behind the Golden Ratio
- Chapter 7 · Classical Sources: the Xiang Pu, the Neize of the Liji, Theophrastus and Pliny
- Chapter 8 · The Empirical Loop: the Formula and Skin-Feel Ledger, Field Tools and Checker Specifications