关于「年代是一条分布:高密度区间、合并检验与先验窗口」,《断代误差棒与古玩送检》给出的定量结论是什么?
结论:一条多峰分布不能用一个数字概括。68.3 % 与 95.4 % 两个水平可以给出不同的段数;均值、中位数与众数在平台上可以相差一百年。合并多个测值前必须先做一致性检验,否则一个离群值会以更小的误差混进结果。真正能收窄区间的,是与待检验说法无关的独立先验,而风格判断不能充当这种先验。到这里,放射性碳的故事暂告一段落。下一章转向瓷器与陶器真正依靠的那一类时钟:它测的不是碳,而是矿物颗粒自上一次受热以来累积的辐射剂量。
数据口径:书中器物、价格与参数均为示意,校准曲线是手设示意折线而非 IntCal 数据;全部计算由书中程序生成。 本书不对任何具体藏品下结论,不构成鉴定意见,也不是个人化的投资、法律、税务或理财建议。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 68.3, 95.4
| 68.3% HPD: 5 range(s) | ||
| 794 to | 744 BC | mass 0.128 |
| 720 to | 690 BC | mass 0.077 |
| 661 to | 607 BC | mass 0.137 |
| 595 to | 560 BC | mass 0.090 |
| 509 to | 410 BC | mass 0.252 |
| 95.4% HPD: 2 range(s) | ||
| 803 to | 541 BC | mass 0.627 |
| 538 to | 403 BC | mass 0.328 |
| summary | year BC | density / peak |
| mean | 603 | 0.896 |
| median | 605 | 0.908 |
| mode | 705 | 1.000 |
| sd of curve BP over 780 to 410 BC: 10.4 |
查看完整验算程序
# Chapter 3. p31: a calibrated date is a distribution, not a year.
# Same SCHEMATIC curve as p21 (not IntCal). For 2450 +/- 25 BP the
# 68.3% and 95.4% highest-density ranges are listed with their mass,
# and three one-number summaries (mean, median, mode) are compared
# with the density at each of them, relative to the peak density.
import math
import statistics
KNOTS = ((1000, 2830), (820, 2500), (780, 2440), (730, 2470),
(680, 2430), (600, 2465), (540, 2425), (470, 2455),
(410, 2440), (360, 2340), (200, 2160))
CURVE_SD = 15.0
def curve(bc):
for (x0, y0), (x1, y1) in zip(KNOTS, KNOTS[1:]):
if x1 <= bc <= x0:
return y0 + (y1 - y0) * (x0 - bc) / (x0 - x1)
raise ValueError(bc)
def posterior(m, s, csd=CURVE_SD):
years = list(range(1000, 199, -1))
v = s * s + csd * csd
w = [math.exp(-(m - curve(y)) ** 2 / (2.0 * v)) for y in years]
tot = math.fsum(w)
return years, [x / tot for x in w]
def hpd(years, p, level):
order = sorted(range(len(p)), key=lambda i: (-p[i], i))
keep, acc = set(), []
for i in order:
keep.add(i)
acc.append(p[i])
if math.fsum(acc) >= level:
break
segs, start = [], None
for i in range(len(p) + 1):
inside = i < len(p) and i in keep
if inside and start is None:
start = i
if not inside and start is not None:
mass = math.fsum(p[start:i])
segs.append((years[start], years[i - 1], mass))
start = None
return segs
def quantile(years, p, q):
acc = []
for y, x in zip(years, p):
acc.append(x)
if math.fsum(acc) >= q:
return y
return years[-1]
if __name__ == "__main__":
ys, p = posterior(2450, 25)
for lev in (0.683, 0.954):
segs = hpd(ys, p, lev)
print("{:.1%} HPD: {} range(s)".format(lev, len(segs)))
for a, b, mass in segs:
print(" {:>4} to {:>4} BC mass {:.3f}".format(a, b, mass))
mean = math.fsum([y * x for y, x in zip(ys, p)])
med = quantile(ys, p, 0.5)
top = max(p)
mode = ys[p.index(top)]
print("summary year BC density / peak")
for name, y in (("mean", round(mean)), ("median", med),
("mode", mode)):
d = p[ys.index(y)] / top
print(" {:<6} {:>7} {:.3f}".format(name, y, d))
spread = statistics.pstdev([curve(y) for y in range(780, 409, -1)])
print("sd of curve BP over 780 to 410 BC: {:.1f}".format(spread))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《热释光与放射性断代误差棒、校准曲线平台多解与古玩送检边界母典》第 3 章「年代是一条分布:高密度区间、合并检验与先验窗口」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-331 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026331,
author = {Fan, Yafu},
title = {Error Bars in Thermoluminescence and Radiometric Dating: Multiple Solutions on Calibration Plateaus and When to Send Antiques for Testing},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}