关于「混响时间与 Schroeder 频率:模态区的上界」,《房间模态与低频死角》给出的定量结论是什么?
结论:第三章用 Sabine 与 Eyring 公式估算混响时间,导出 4.31 赫兹的模态带宽与约 230 赫兹的 Schroeder 频率。
数据口径:本书用瑞利的模态解与纯标准库程序检验这两条常识:示意书房一百二十赫兹以下只有 14 个简正模态,最低在 40.8 赫兹;每一维的正中都是该维奇数阶模态的节点,放在房间几何正中的声源,耦合平方的平均值只有墙角的 0.143。 书中的房间、吸声系数、混响时间、位置与聆听习惯均为示意参数;全部计算由书中程序生成。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 230, 4.31
| case | T s | f_s Hz | B Hz | M(f_s) | M(50Hz) | N<f_s |
| study, bare | 0.68 | 266 | 3.23 | 3.59 | 0.30 | 113 |
| study, furnished | 0.51 | 230 | 4.31 | 3.73 | 0.39 | 75 |
| studio, bare | 1.12 | 161 | 1.96 | 3.62 | 0.57 | 115 |
| studio, panels | 0.70 | 127 | 3.14 | 3.87 | 0.92 | 59 |
| hall (illustr.) | 2.00 | 25.8 | 1.10 | 2.74 | ||
| large-room overlap at f_s for any room: 3 ln10/pi * 4 pi * 4e6 / c^3 = 2.74 |
核心公式
\[T = \frac{24\ln 10}{c}\cdot\frac{V}{A},\qquad A = \sum_i S_i\alpha_i\]
查看完整验算程序
# Chapter 3. p32: the Schroeder frequency and the modal overlap.
# A mode decays as exp(-delta t) with delta = 3 ln(10) / T, so its
# half-power bandwidth is B = delta / pi = 3 ln(10) / (pi T), about 2.2/T.
# Modal overlap M(f) = B * dN/df: the number of modes inside one
# bandwidth. The usual working limit f_s = 2000 sqrt(T / V) is where the
# large-room density gives M near 3 (Schroeder and Kuttruff 1962; the
# constant has been stated differently over the years). T values come
# from p31 (Sabine); the hall is an illustrative 12000 m^3 at 2.0 s.
import itertools
import math
C = 343.0
CASES = [("study, bare", (4.2, 3.4, 2.7), 0.68),
("study, furnished", (4.2, 3.4, 2.7), 0.51),
("studio, bare", (8.0, 6.0, 3.6), 1.12),
("studio, panels", (8.0, 6.0, 3.6), 0.70)]
def density(room, f, c=C):
a, b, h = room
v = a * b * h
s = 2.0 * (a * b + b * h + a * h)
edge = 4.0 * (a + b + h)
return math.fsum([4.0 * math.pi * v * f ** 2 / c ** 3,
math.pi * s * f / (2.0 * c ** 2),
edge / (8.0 * c)])
def count(room, fmax, c=C):
top = [int(2.0 * fmax * d / c) + 1 for d in room]
hits = [1 for n in itertools.product(*[range(t + 1) for t in top])
if n != (0, 0, 0) and 0.5 * c * math.hypot(
*[k / d for k, d in zip(n, room)]) <= fmax]
return len(hits)
def bandwidth(t):
return 3.0 * math.log(10.0) / (math.pi * t)
print(" case T s f_s Hz B Hz M(f_s) M(50Hz) N<f_s")
for name, room, t in CASES:
v = math.prod(room)
fs = 2000.0 * math.sqrt(t / v)
b = bandwidth(t)
print(" %-17s %5.2f %7.0f %5.2f %7.2f %8.2f %6d"
% (name, t, fs, b, b * density(room, fs),
b * density(room, 50.0), count(room, fs)))
v_h, t_h = 12000.0, 2.0
fs_h = 2000.0 * math.sqrt(t_h / v_h)
m_h = bandwidth(t_h) * 4.0 * math.pi * v_h * fs_h ** 2 / C ** 3
print(" hall (illustr.) %5.2f %7.1f %5.2f %7.2f" % (t_h, fs_h,
bandwidth(t_h), m_h))
print("large-room overlap at f_s for any room: 3 ln10/pi * 4 pi * 4e6 / "
"c^3 = %.2f" % (3.0 * math.log(10.0) * 16.0e6 / C ** 3))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《室内声学驻波简正模态、低频声场死角与双耳节律聆听疲劳母典》第 3 章「混响时间与 Schroeder 频率:模态区的上界」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-288 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026288,
author = {Fan, Yafu},
title = {Room-Acoustic Standing-Wave Modes, Low-Frequency Dead Spots, Listening Dose and the Physics of Binaural Beats},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}