关于「尺寸比与简并:Bolt 的间隔统计与 Bonello 判据」,《房间模态与低频死角》给出的定量结论是什么?

结论:第二章在同一容积下比较五种比例,立方体的模态间隔标准差为 7.26 赫兹,示意书房为 3.23 赫兹,并按后来文献的通行表述实现 Bonello 判据。

数据口径:本书用瑞利的模态解与纯标准库程序检验这两条常识:示意书房一百二十赫兹以下只有 14 个简正模态,最低在 40.8 赫兹;每一维的正中都是该维奇数阶模态的节点,放在房间几何正中的声源,耦合平方的平均值只有墙角的 0.143。 书中的房间、吸声系数、混响时间、位置与聆听习惯均为示意参数;全部计算由书中程序生成。

English version

对照数据表

下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 3.23, 7.26

same volume 38.556 m^3, modes up to 150 Hz
proportionmodes distinct coinc<2Hzmaxgapsd(gap)
cube 1:1:122715021.07.26
1:2:326188115.44.90
1:1:1.626179422.35.61
study 1:1.26:1.5625250613.13.23
1:1.4:1.926260513.23.40
lowest mode, cube vs 1:1.4:1.9: 50.8 Hz vs 37.0 Hz

核心公式

\[N(f) \approx \frac{4\pi V f^3}{3c^3} + \frac{\pi S f^2}{4c^2} + \frac{L f}{8c}\]
查看完整验算程序
# Chapter 2. p21: room proportions, coincident modes and spacing spread.
# Bolt (1946) studied how the spacing of normal frequencies depends on
# the proportions of a rectangular room. Here five rooms share one
# volume (38.556 m^3, the study of p11) and differ only in proportion
# (height : width : length, illustrative). For the modes below 150 Hz we
# count exact coincidences (two or more index triples at one frequency),
# near pairs closer than 2 Hz, the largest gap, and the standard deviation
# of all spacings, zero gaps of coincident modes included (a smaller
# spread means more even spacing).
import itertools
import math
import statistics

C = 343.0
V = 4.2 * 3.4 * 2.7
FMAX = 150.0
RATIOS = [("cube 1:1:1", (1.0, 1.0, 1.0)),
          ("1:2:3", (1.0, 2.0, 3.0)),
          ("1:1:1.6", (1.0, 1.0, 1.6)),
          ("study 1:1.26:1.56", (2.7, 3.4, 4.2)),
          ("1:1.4:1.9", (1.0, 1.4, 1.9))]


def modes(room, fmax, c=C):
    top = [int(2.0 * fmax * d / c) + 1 for d in room]
    out = []
    for n in itertools.product(*[range(t + 1) for t in top]):
        if n == (0, 0, 0):
            continue
        f = 0.5 * c * math.hypot(*[k / d for k, d in zip(n, room)])
        if f <= fmax:
            out.append(f)
    return sorted(out)


def scale(r):
    k = (V / math.prod(r)) ** (1.0 / 3.0)
    return tuple(k * x for x in r)


print("same volume %.3f m^3, modes up to %d Hz" % (V, int(FMAX)))
print("  proportion          modes distinct coinc  <2Hz  maxgap  sd(gap)")
for name, r in RATIOS:
    room = scale(r)
    f = modes(room, FMAX)
    distinct = [f[0]]
    for x in f[1:]:
        if x - distinct[-1] > 1e-6:
            distinct.append(x)
    coinc = len(f) - len(distinct)
    gaps = [b - a for a, b in zip(distinct, distinct[1:])]
    near = len([g for g in gaps if g < 2.0])
    every = [b - a for a, b in zip(f, f[1:])]
    print("  %-18s %6d %8d %5d %5d %7.1f %8.2f"
          % (name, len(f), len(distinct), coinc, near, max(gaps),
             statistics.pstdev(every)))
print("lowest mode, cube vs 1:1.4:1.9: %.1f Hz vs %.1f Hz"
      % (modes(scale(RATIOS[0][1]), FMAX)[0],
         modes(scale(RATIOS[4][1]), FMAX)[0]))

唯一数据源与引用

范雅福(Fan, Y.). (2026). 《室内声学驻波简正模态、低频声场死角与双耳节律聆听疲劳母典》第 2 章「尺寸比与简并:Bolt 的间隔统计与 Bonello 判据」(版本 1.0.0). 5D Library. DOI 待发布

DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-288 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026288,
  author    = {Fan, Yafu},
  title     = {Room-Acoustic Standing-Wave Modes, Low-Frequency Dead Spots, Listening Dose and the Physics of Binaural Beats},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

本书其他章节结论