关于「撕封声学:穿孔节距、离散傅里叶与声音评分」,《天地盖排气与包装投入拐点》给出的定量结论是什么?
结论:撕封声的主频由 \(f_0 = v/p\) 决定:节距是设计者给的,速度是顾客给的。离散傅里叶变换直接按定义求和,在 1,024 个样点上足够快,能准确找到 250.0 赫兹的主频与 546.5 赫兹的谱质心。示意模型显示,声音对评分有真实但不大的作用,一个倍频程只相当于噪声标准差的 0.533,评分者层面 \(R^2\) 只有 0.295。薯片实验迁移到包装,是类比,要用自己的数据检验。
数据口径:盖子下落时,盒内空气只能从盖裙与地盒之间的窄缝排出,狭缝泊肃叶流给出闭式下落时间方程:同一只示意盒子,缝宽 0.20 毫米时落 17.080 秒,0.50 毫米时只要 1.093 秒,相差 15.625 倍;缝宽误差按三次方放大,常规窄缝方案只有 0.897 的盒子落在示意可行区间里,所以要找的是区间而不是「越慢越好」。 重量是品质线索,但人掂的是重量与预期之差,示意期望模型的品质分在实际与预期之比 1.416 处见顶;重量的正当用处是稳与硬,瓶子坐低 20 毫米让倾倒角多出 2.79 度,藏配重一律判红。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 1024, 250.0, 546.5
A. tonal frequency f0 = v / p in Hz
pitch mm v 0.15 m/s v 0.30 m/s v 0.50 m/s
0.8 187.5 375.0 625.0
1.2 125.0 250.0 416.7
2.0 75.0 150.0 250.0
3.0 50.0 100.0 166.7
B. synthetic tear, f0 250.0 Hz, bin width 7.8125 Hz
1,024 samples at 8,000 Hz
peak at 250.0 Hz
spectral centroid 546.5 Hz
energy share above 2 kHz 0.0671核心公式
\[f_0 = \frac{v}{p},\]
查看完整验算程序
# Chapter 5. p51: the pitch of a tear strip, and a plain DFT to find it.
# A perforated tear strip with hole pitch p torn at speed v breaks one
# bridge every p / v seconds, so its tonal part sits at f0 = v / p.
# Part B synthesises 0.128 s of a tear (f0 = 250 Hz with 2nd and 3rd
# harmonics, broadband noise from a fixed seed), applies a Hann window
# and takes a direct DFT with cmath (no FFT library) to recover f0,
# the spectral centroid and the share of energy above 2 kHz.
import cmath
import math
import random
FS, N = 8000, 1024
if __name__ == "__main__":
print("A. tonal frequency f0 = v / p in Hz")
print(" pitch mm v 0.15 m/s v 0.30 m/s v 0.50 m/s")
for pm in (0.8, 1.2, 2.0, 3.0):
row = [v / (pm * 1e-3) for v in (0.15, 0.30, 0.50)]
print(" {:7.1f} {:10.1f} {:10.1f} {:10.1f}".format(pm, *row))
rng = random.Random(39151)
f0 = 0.30 / 1.2e-3
x = []
for n in range(N):
t = n / FS
s = math.fsum([math.sin(2 * math.pi * f0 * t),
0.5 * math.sin(2 * math.pi * 2 * f0 * t),
0.25 * math.sin(2 * math.pi * 3 * f0 * t),
rng.gauss(0.0, 0.3)])
hann = 0.5 - 0.5 * math.cos(2 * math.pi * n / (N - 1))
x.append(s * hann)
power = []
for k in range(N // 2):
acc = [x[n] * cmath.exp(-2j * math.pi * k * n / N)
for n in range(N)]
re = math.fsum(z.real for z in acc)
im = math.fsum(z.imag for z in acc)
power.append(re * re + im * im)
df = FS / N
kmax = max(range(1, N // 2), key=lambda k: power[k])
tot = math.fsum(power[1:])
cen = math.fsum(k * df * power[k] for k in range(1, N // 2)) / tot
hi = math.fsum(power[k] for k in range(1, N // 2) if k * df > 2000)
print("B. synthetic tear, f0 {:.1f} Hz, bin width {:.4f} Hz".format(
f0, df))
print(" {:,} samples at {:,} Hz".format(N, FS))
print(" peak at {:.1f} Hz".format(kmax * df))
print(" spectral centroid {:.1f} Hz".format(cen))
print(" energy share above 2 kHz {:.4f}".format(hi / tot))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《高奢包装五感开箱工程、天地盖阻尼排气物理与触觉重量溢价母典》第 5 章「撕封声学:穿孔节距、离散傅里叶与声音评分」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-391 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026391,
author = {Fan, Yafu},
title = {Multi-Sensory Luxury Unboxing Engineering, Lid-Friction Air-Damping Physics and Haptic Weight Price Anchoring},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}