关于「慢不等于好:公差立方放大与下落时间可行区间」,《天地盖排气与包装投入拐点》给出的定量结论是什么?
结论:缝宽误差按三次方传到下落时间上。名义 5.061 秒的窄缝方案,在 0.03 毫米标准差下,第五与第九十五百分位相差 2.687 倍,区间内比例 0.897;放宽缝宽、缩短走气周长后,离散明显收窄,但进出口损失上升,方案 C 是较稳妥的折中。按 0.15 的示意韦伯分数,同批两只窄缝盒子有 0.745 的概率被分出快慢。成对比较与布拉德利-特里模型可以把「慢多少才好」变成可检验的倒 U 形假说。
数据口径:盖子下落时,盒内空气只能从盖裙与地盒之间的窄缝排出,狭缝泊肃叶流给出闭式下落时间方程:同一只示意盒子,缝宽 0.20 毫米时落 17.080 秒,0.50 毫米时只要 1.093 秒,相差 15.625 倍;缝宽误差按三次方放大,常规窄缝方案只有 0.897 的盒子落在示意可行区间里,所以要找的是区间而不是「越慢越好」。 重量是品质线索,但人掂的是重量与预期之差,示意期望模型的品质分在实际与预期之比 1.416 处见顶;重量的正当用处是稳与硬,瓶子坐低 20 毫米让倾倒角多出 2.79 度,藏配重一律判红。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 0.03, 0.897, 2.687, 5.061
| target T 5.061 s, gap sd 0.03 mm, window 3-8 s, n 20,000 | ||||||||
| design gap mm | vent w m | loss | P5 s | P50 s | P95 s | in-win | P95/P5 | |
| A | 0.30 | 0.700 | 0.016 | 3.19 | 5.04 | 8.58 | 0.897 | 2.687 |
| B | 0.40 | 0.295 | 0.049 | 3.59 | 5.07 | 7.53 | 0.967 | 2.098 |
| C | 0.50 | 0.151 | 0.109 | 3.82 | 5.05 | 6.97 | 0.989 | 1.827 |
| D | 0.60 | 0.087 | 0.202 | 3.99 | 5.06 | 6.54 | 0.997 | 1.640 |
查看完整验算程序
# Chapter 2. p21: manufacturing tolerance of the gap, cubed.
# Four designs reach about the same nominal drop time. Design A uses a
# 0.30 mm gap round the whole skirt; B to D use wider gaps but vent
# only a fraction of the perimeter (ribs close the rest), so w is cut
# until T matches A. Each gap then varies box to box with an
# illustrative sd of 0.03 mm (normal, seed fixed). Window of 3 to 8 s
# is the author's illustrative hypothesis, to be refilled by tests.
import math
import random
MU, RHO, G = 1.81e-5, 1.20, 9.81
AREA = 0.20 * 0.15
W_FULL = 0.70
M, L0, S = 0.25, 0.010, 0.040
SD = 0.03e-3
LO, HI = 3.0, 8.0
GEOM = math.fsum([L0 * S, 0.5 * S * S])
def t_drop(h, w):
return 12.0 * MU * AREA * AREA * GEOM / (w * h ** 3 * M * G)
def loss_share(h, w, n=100):
dp = M * G / AREA
c2 = 0.75 * RHO * (AREA / (w * h)) ** 2
terms = []
for i in range(n + 1):
ell = L0 + S * i / n
c1 = 12.0 * MU * AREA * ell / (w * h ** 3)
v = (-c1 + math.sqrt(c1 * c1 + 4.0 * c2 * dp)) / (2.0 * c2)
c = 1 if i in (0, n) else (4 if i % 2 else 2)
terms.append(c / v)
t = S / n / 3.0 * math.fsum(terms)
return t / t_drop(h, w) - 1.0
def pct(xs, q):
k = (len(xs) - 1) * q
lo = int(math.floor(k))
hi = min(lo + 1, len(xs) - 1)
return xs[lo] + (xs[hi] - xs[lo]) * (k - lo)
if __name__ == "__main__":
target = t_drop(0.30e-3, W_FULL)
rng = random.Random(39121)
n = 20000
print("target T {:.3f} s, gap sd {:.2f} mm, window {:.0f}-{:.0f} s,"
" n {:,}".format(target, SD * 1e3, LO, HI, n))
print(" design gap mm vent w m loss P5 s P50 s P95 s"
" in-win P95/P5")
for name, hm in (("A", 0.30), ("B", 0.40), ("C", 0.50), ("D", 0.60)):
h0 = hm * 1e-3
w = W_FULL * t_drop(h0, W_FULL) / target
ts = []
inside = 0
for _ in range(n):
h = rng.gauss(h0, SD)
t = t_drop(h, w)
ts.append(t)
if LO <= t <= HI:
inside += 1
ts.sort()
p5, p50, p95 = pct(ts, 0.05), pct(ts, 0.50), pct(ts, 0.95)
print(" {} {:4.2f} {:6.3f} {:5.3f} {:6.2f} {:6.2f}"
" {:6.2f} {:6.3f} {:6.3f}".format(
name, hm, w, loss_share(h0, w), p5, p50, p95,
inside / n, p95 / p5))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《高奢包装五感开箱工程、天地盖阻尼排气物理与触觉重量溢价母典》第 2 章「慢不等于好:公差立方放大与下落时间可行区间」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-391 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026391,
author = {Fan, Yafu},
title = {Multi-Sensory Luxury Unboxing Engineering, Lid-Friction Air-Damping Physics and Haptic Weight Price Anchoring},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}