What does Regimes, Tail Dependence and Barbells conclude, in numbers, about “Copulas and Tail Dependence”?
Answer: Sklar's theorem splits a joint distribution into margins and a copula, so that the dependence structure can be modelled separately; rank correlations and tail-dependence coefficients are measures at the level of the copula. The Gaussian copula (\(\rho < 1\)) has zero tail dependence, but only in the limit: with correlation 0.5, the conditional probability of a joint crash at the 1 % quantile is still 0.125. The Clayton copula has only lower-tail dependence, \(2{-1/\theta}\), the Gumbel copula only upper-tail dependence, \(2 - 2{1/\theta}\), and the t copula symmetric dependence in both tails. With the same Kendall's τ, the four copulas give probabilities of both assets falling into their worst 1 % that differ by a factor of more than eight. The accurate core of the 2008 criticism of the Gaussian copula is zero tail dependence and calibration on calm periods, not that "a formula killed Wall Street".
Scope of the numbers: When a crisis comes, do assets fall together? How large must reserves and safety cushions be? This book presents mathematical models for teaching and research and is not investment advice. Marked boxes separate published evidence, runnable Python calculations (16 programs), classical sources and the author's models and hypotheses; all data in the book are fictional or simulated.
Data table
The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 0.125
| lower tail | u = 0.05 | 0.01 | 0.002 | limit as u -> 0 |
| Gaussian | 0.249 | 0.125 | 0.065 | 0.000 |
| t (4 d.f.) | 0.333 | 0.282 | 0.265 | 0.253 |
| Clayton | 0.510 | 0.505 | 0.506 | 0.500 |
| Gumbel | 0.170 | 0.063 | 0.026 | 0.000 |
| upper tail | u = 0.05 | 0.01 | 0.002 | limit as u -> 0 |
| Gaussian | 0.245 | 0.125 | 0.071 | 0.000 |
| t (4 d.f.) | 0.334 | 0.275 | 0.242 | 0.253 |
| Clayton | 0.096 | 0.022 | 0.003 | 0.000 |
| Gumbel | 0.432 | 0.417 | 0.376 | 0.413 |
| P(both in their worst 1 %) per model (independence: 0.0001): | ||||
| Gaussian 0.0013 | t (4 d.f.) 0.0028 | Clayton 0.0050 | Gumbel 0.0006 |
Key formula
Show the full program
# Tail dependence of four copulas with the SAME Kendall's tau = 1/3: Gaussian (rho 0.5),
# Student t (rho 0.5, 4 d.f.), Clayton (theta 1) and Gumbel (theta 1.5). Empirical
# lambda_L(u) = P(V < u | U < u) and lambda_U(u) = P(V > 1-u | U > 1-u) from 400,000
# simulated pairs, against the theoretical limits as u -> 0. Margins do not matter: the
# copula is invariant to increasing transformations, so empirical quantiles suffice.
import math, random
N = 400_000
def gaussian(rng, rho=0.5, df=None):
out = []
for _ in range(N):
a = rng.gauss(0, 1); b = rho * a + math.sqrt(1 - rho * rho) * rng.gauss(0, 1)
if df:
w = math.sqrt(rng.gammavariate(df / 2, 2) / df); a, b = a / w, b / w
out.append((a, b))
return out
def clayton(rng, th=1.0): # Marshall-Olkin: gamma frailty
out = []
for _ in range(N):
v = rng.gammavariate(1 / th, 1)
out.append(tuple((1 + rng.expovariate(1) / v) ** (-1 / th) for _ in range(2)))
return out
def gumbel(rng, th=1.5): # Marshall-Olkin: positive stable frailty
a, out = 1 / th, []
for _ in range(N):
w, e = rng.uniform(0, math.pi), rng.expovariate(1)
s = (math.sin(a * w) / math.sin(w) ** (1 / a)
* (math.sin((1 - a) * w) / e) ** ((1 - a) / a))
out.append(tuple(math.exp(-(rng.expovariate(1) / s) ** a) for _ in range(2)))
return out
def lam(pairs, u):
xs = sorted(p[0] for p in pairs); ys = sorted(p[1] for p in pairs); n = len(pairs)
k = int(u * n); xl, yl, xh, yh = xs[k], ys[k], xs[n - k - 1], ys[n - k - 1]
lo = sum(1 for x, y in pairs if x < xl and y < yl) / k
hi = sum(1 for x, y in pairs if x > xh and y > yh) / k
return lo, hi
def t_cdf(x, df, steps=4000): # Simpson's rule on the density, x < 0
c = math.exp(math.lgamma((df + 1) / 2) - math.lgamma(df / 2))
c /= math.sqrt(df * math.pi)
f = lambda t: c * (1 + t * t / df) ** (-(df + 1) / 2)
a, h = x - 400.0, 400.0 / steps
s = f(a) + f(x) + sum((4 if i % 2 else 2) * f(a + i * h) for i in range(1, steps))
return s * h / 3
if __name__ == "__main__":
rng = random.Random(2002)
lt = 2 * t_cdf(-math.sqrt(5 * 0.5 / 1.5), 5)
models = (("Gaussian", gaussian(rng), 0.0, 0.0),
("t (4 d.f.)", gaussian(rng, df=4), lt, lt),
("Clayton", clayton(rng), 2 ** -1.0, 0.0),
("Gumbel", gumbel(rng), 0.0, 2 - 2 ** (1 / 1.5)))
us = (0.05, 0.01, 0.002)
res = {name: [lam(pairs, u) for u in us] for name, pairs, a, b in models}
for side, j in (("lower", 0), ("upper", 1)):
print(f"{side} tail u = 0.05 0.01 0.002 limit as u -> 0")
for name, pairs, l_lo, l_hi in models:
print(f" {name:12s}" + "".join(f"{r[j]:8.3f}" for r in res[name])
+ f" {(l_lo, l_hi)[j]:6.3f}")
print("P(both in their worst 1 %) per model (independence: 0.0001):")
print(" " + " ".join(f"{name} {res[name][1][0] * 0.01:.4f}"
for name, p, a, b in models))Single source and citation
Fan, Y. (2026). Macro-Liquidity Regime Switching, Extreme Tail Dependence and Barbell Asset Allocation (Version 1.0.0), Chapter 3: Copulas and Tail Dependence. 5D Library. https://doi.org/10.5281/zenodo.23828049
DOI: 10.5281/zenodo.23828049 · Read the monograph · 5DL-B-040 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026040,
author = {Fan, Yafu},
title = {Macro-Liquidity Regime Switching, Extreme Tail Dependence and Barbell Asset Allocation},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
doi = {10.5281/zenodo.23828049},
url = {https://doi.org/10.5281/zenodo.23828049}
}Other chapter answers in this book
- Chapter 1 · Hidden Markov Models and Volatility Regimes
- Chapter 2 · Extreme Value Theory: From Tail Index to Expected Shortfall
- Chapter 4 · Correlation in Crises and Vine Copulas
- Chapter 5 · Barbell Allocation and Stochastic Dominance
- Chapter 6 · Sovereign Buffers and Liquidity Regimes
- Chapter 7 · Reading the Classics: the "Nine-Year Store" and the Ever-Normal Granary
- Chapter 8 · Practice and a Pre-Registered Test