What does Sitting Pressure and the Standing-Desk Myth conclude, in numbers, about “Workstation Geometry: Seat Height, Footrest, Standing Desk and the Screen After Reclining”?

Answer: Seat height is set by popliteal height and typing height by elbow height; when the two disagree, short people need a footrest and tall people a higher desk, and with a fixed desk of 0.73 metres everyone shorter than 1.821 metres needs a footrest. Standing desk height varies with stature by more than twenty centimetres, so no fixed height fits a whole team. Reclining to 135 degrees leaves screen height almost unchanged but requires bringing the screen more than half a metre closer. The next chapter leaves the modern workstation for two old texts: one says "if the mat was not straight, he would not sit," the other pictures a young tree bound straight to a stake.

Scope of the numbers: Its parameters are illustrative; all calculations are generated by its programs. The book is not medical advice and claims no health effect for any intervention; readers with existing back problems should consult a licensed physician before changing a workstation or starting a self-experiment.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. printed values that match the answer: 0.73, 1.821

statureseat mfootrest mdesk too low mstand desk m
1.550.5130.1050.0000.997
1.600.5060.0860.0001.028
1.650.4990.0670.0001.059
1.700.4920.0470.0001.091
1.750.4850.0270.0001.123
1.800.4780.0080.0001.154
1.850.4830.0000.0121.185
1.900.4950.0000.0311.217
0.73 m desk needs a footrest below stature 1.821 m
standing desk range for 1.55 to 1.90 m: 0.997 to 1.217 m
Show the full program
# Chapter 6. p61: seat, footrest and standing-desk heights from stature
# 身高比例:站立肘高 0.630 H 取自 Winter 教科书引用的 Drillis-Contini
# 比例;坐姿腘窝高 0.25 H、坐姿肘高(座面以上)0.14 H 为示意值;
# 鞋厚 0.02 m;固定桌面高 0.73 m(常见办公桌,示意)。
# 规则:座面 = 腘窝高 + 鞋;需要座面 = 桌面 - 坐姿肘高;
# 需要座面高于合腿座面时抬椅并垫脚踏,差值即脚踏高;反之桌面偏低;
# 站立桌面 = 站立肘高 + 鞋。
POP, ELB_SIT, ELB_STAND, SHOE, DESK = 0.25, 0.14, 0.630, 0.02, 0.73


def card(h, desk=DESK):
    seat_fit = POP * h + SHOE
    seat_need = desk - ELB_SIT * h
    if seat_need >= seat_fit:
        seat, foot, gap = seat_need, seat_need - seat_fit, 0.0
    else:
        seat, foot, gap = seat_fit, 0.0, seat_fit - seat_need
    stand = ELB_STAND * h + SHOE
    return seat, foot, gap, stand


print("stature  seat m  footrest m  desk too low m  stand desk m")
for h in (1.55, 1.60, 1.65, 1.70, 1.75, 1.80, 1.85, 1.90):
    seat, foot, gap, stand = card(h)
    print("{:7.2f} {:7.3f} {:11.3f} {:15.3f} {:13.3f}".format(
        h, seat, foot, gap, stand))
lo, hi = 1.40, 2.10
for _ in range(60):
    mid = (lo + hi) / 2.0
    if card(mid)[1] > 0.0:
        lo = mid
    else:
        hi = mid
print("0.73 m desk needs a footrest below stature {:.3f} m".format(lo))
print("standing desk range for 1.55 to 1.90 m: {:.3f} to {:.3f} m".format(
    card(1.55)[3], card(1.90)[3]))

Single source and citation

Fan, Y. (2026). Sitting Disc-Pressure Levers, the 135-Degree Recline and the Standing-Desk Energy Myth (Version 1.0.0), Chapter 6: Workstation Geometry: Seat Height, Footrest, Standing Desk and the Screen After Reclining. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-184 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026184,
  author    = {Fan, Yafu},
  title     = {Sitting Disc-Pressure Levers, the 135-Degree Recline and the Standing-Desk Energy Myth},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book