What does PPP Distortions and Multi-Currency Price Endings conclude, in numbers, about “Ending Lattices: Landing a Tier Price on a Number Local Buyers Recognise”?
Answer: A lattice is a period plus a set of endings, and how far it can sit from a tier price is set roughly by the period divided by the price: the same x9 has a nearest-snap error of about 6.0% at ringgit prices above 100 and 14.7% at Singapore-dollar prices in the forties. The eight candidate classes each have a use: decimal endings barely move the price, single and double 9s signal a good deal, round prices suit gifts and collections, just-below points are the only class that changes the leading digit, the lucky 8 and the avoided 4 are constraints rather than evidence, and the yen's 80 and 98 barely move a price on a period of 100. Rounding checks the floor first and the break-even volume second: one step down needs 16.0% more units in ringgit and 40.7% more in Singapore dollars. The left-digit effect shrinks with the leading digit and is worth most at thresholds like 20, 30 and 50. The cost of avoiding 4 is concentrated in the yen's four-thousand stretch, where the move reaches 10.5%. The pipeline strings these rules together and gives prices with reasons; converted to dollars, the deck runs from 22.60 to 43.99 across the five markets, a gap left for Chapter 5 to check.
Scope of the numbers: Exchange rates and price levels in the book are stated sample assumptions, not live data; taxes, display rules and the law on price discrimination are described only in general terms, not as legal or tax advice. Marked boxes separate published evidence, runnable calculations, sources and the author's hypotheses, each stating what would refute it.
Data table
The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 100, 14.7, 30, 6.0, 80, 98
| SAMPLE bands (assumed). S = period, |E| = endings per period, n = points in band | ||||||||
| ccy | band | class | S |E| | n | near | up | | no4 near | |
| USD | 30-60 | x.99 | 1 | 1 | 30 | 1.6% | 3.3% | | 12.1% |
| USD | 30-60 | x9 | 10 | 1 | 3 | 14.7% | 34.5% | | 20.4% |
| USD | 30-60 | x9.99 | 10 | 1 | 3 | 14.3% | 33.3% | | 20.0% |
| USD | 30-60 | x0 | 10 | 1 | 4 | 14.3% | 33.3% | | 25.0% |
| MYR | 80-160 | x.90 | 1 | 1 | 80 | 0.6% | 1.3% | | 3.8% |
| MYR | 80-160 | x9 | 10 | 1 | 8 | 6.0% | 12.7% | | 6.7% |
| MYR | 80-160 | x9.90 | 10 | 1 | 8 | 5.9% | 12.5% | | 6.7% |
| MYR | 80-160 | x8 | 10 | 1 | 8 | 6.0% | 12.8% | | 6.8% |
| MYR | 80-160 | x0 | 10 | 1 | 9 | 5.9% | 12.5% | | 7.1% |
| SGD | 35-70 | x.90 | 1 | 1 | 35 | 1.4% | 2.9% | | 12.1% |
| SGD | 35-70 | x9 | 10 | 1 | 4 | 14.7% | 34.5% | | 20.4% |
| SGD | 35-70 | x9.90 | 10 | 1 | 4 | 14.3% | 33.4% | | 20.0% |
| SGD | 35-70 | x0 | 10 | 1 | 4 | 14.3% | 33.3% | | 25.0% |
| TWD | 700-1,400 | x9 | 10 | 1 | 70 | 0.7% | 1.4% | | 3.8% |
| TWD | 700-1,400 | x99 | 100 | 1 | 7 | 6.7% | 14.3% | | 6.7% |
| TWD | 700-1,400 | x88 | 100 | 1 | 7 | 6.8% | 14.5% | | 6.8% |
| TWD | 700-1,400 | x80/88/90/99 | 100 | 4 | 28 | 5.5% | 11.6% | | 6.1% |
| TWD | 700-1,400 | x00 | 100 | 1 | 8 | 6.7% | 14.3% | | 7.1% |
| JPY | 3,500-7,000 | x80 | 100 | 1 | 35 | 1.4% | 2.9% | | 12.1% |
| JPY | 3,500-7,000 | x98 | 100 | 1 | 35 | 1.4% | 2.9% | | 12.1% |
| JPY | 3,500-7,000 | x980 | 1,000 | 1 | 4 | 14.4% | 33.6% | | 20.1% |
| JPY | 3,500-7,000 | x000 | 1,000 | 1 | 4 | 14.3% | 33.3% | | 25.0% |
| JPY | 3,500-7,000 | x500 | 500 | 1 | 8 | 6.7% | 14.3% | | 17.6% |
| rule of thumb: for one ending per period S at price p, near ~ S / (2p) and up ~ S / p | ||||||||
| MYR x9 at 103.89: S/(2p) = 4.8%; JPY x80 at 4,445.89: S/(2p) = 1.1% |
Show the full program
# Chapter 4. p40: Candidate ending lattices per currency: period, endings, density and worst snap error.
# A lattice class is a period S and a set of endings E: points k * S + e for integers k >= 0, e in E.
# near = worst error of snapping to the NEAREST point, max (b - a) / (a + b) over adjacent a < b;
# up = worst error of always snapping UP, max (b - a) / a. Both are fractions of the price.
# no4 = the same class after dropping every point whose integer part contains the digit 4.
# Bands are SAMPLE price bands around the chapter 1 tier prices (assumed, not market data).
from fractions import Fraction as F
CLASSES = {
"USD": [("x.99", 1, ["0.99"]), ("x9", 10, ["9"]), ("x9.99", 10, ["9.99"]), ("x0", 10, ["0"])],
"MYR": [("x.90", 1, ["0.90"]), ("x9", 10, ["9"]), ("x9.90", 10, ["9.90"]), ("x8", 10, ["8"]),
("x0", 10, ["0"])],
"SGD": [("x.90", 1, ["0.90"]), ("x9", 10, ["9"]), ("x9.90", 10, ["9.90"]), ("x0", 10, ["0"])],
"TWD": [("x9", 10, ["9"]), ("x99", 100, ["99"]), ("x88", 100, ["88"]),
("x80/88/90/99", 100, ["80", "88", "90", "99"]), ("x00", 100, ["0"])],
"JPY": [("x80", 100, ["80"]), ("x98", 100, ["98"]), ("x980", 1000, ["980"]), ("x000", 1000, ["0"]),
("x500", 500, ["0"])]}
BANDS = {"USD": (30, 60), "MYR": (80, 160), "SGD": (35, 70), "TWD": (700, 1400), "JPY": (3500, 7000)}
def points(period, ends, hi, no4=False):
out = []
for k in range(0, int(hi) // period + 2):
for e in ends:
p = k * period + F(e)
if p > 0 and not (no4 and "4" in str(int(p))):
out.append(p)
return sorted(out)
def worst(period, ends, lo, hi, no4=False):
pts = points(period, ends, 3 * hi, no4)
pairs = [(a, b) for a, b in zip(pts, pts[1:]) if b > lo and a < hi]
near = max(F(b - a) / (a + b) for a, b in pairs)
up = max(F(b - a) / a for a, b in pairs)
return near, up, sum(1 for p in pts if lo <= p <= hi)
if __name__ == "__main__":
print("SAMPLE bands (assumed). S = period, |E| = endings per period, n = points in band")
print("{:<4} {:>11} {:<13} {:>5} {:>3} {:>4} {:>7} {:>7} | {:>9}".format(
"ccy", "band", "class", "S", "|E|", "n", "near", "up", "no4 near"))
for ccy, rows in CLASSES.items():
lo, hi = BANDS[ccy]
for name, period, ends in rows:
near, up, n = worst(period, ends, lo, hi)
near4 = worst(period, ends, lo, hi, True)[0]
print("{:<4} {:>5,}-{:<5,} {:<13} {:>5,} {:>3} {:>4} {:>7.1%} {:>7.1%} | {:>9.1%}".format(
ccy, lo, hi, name, period, len(ends), n, float(near), float(up), float(near4)))
print("rule of thumb: for one ending per period S at price p, near ~ S / (2p) and up ~ S / p")
print(" MYR x9 at 103.89: S/(2p) = {:.1%}; JPY x80 at 4,445.89: S/(2p) = {:.1%}".format(
float(F(10) / (2 * F("103.89"))), float(F(100) / (2 * F("4445.89")))))Single source and citation
Fan, Y. (2026). Purchasing-Power-Parity Distortions, Multi-Currency Psychological Price Endings and the Southeast Asia–Taiwan–Japan Pricing Matrix (Version 0.1.0), Chapter 4: Ending Lattices: Landing a Tier Price on a Number Local Buyers Recognise. 5D Library. DOI pending
DOI pending · monograph page goes live after publication · 5DL-B-134 · v0.1.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026134,
author = {Fan, Yafu},
title = {Purchasing-Power-Parity Distortions, Multi-Currency Psychological Price Endings and the Southeast Asia–Taiwan–Japan Pricing Matrix},
year = {2026},
publisher = {5D Library},
edition = {0.1.0},
note = {DOI pending}
}Other chapter answers in this book
- Chapter 1 · Method: The Hard-Conversion Trap, Purchasing-Power Parity and Psychological Endings
- Chapter 2 · Anchors of Six Currencies: Denominations, Small Change, Endings and Tax-Inclusive Labels
- Chapter 3 · Purchasing-Power-Parity Distortions: Why Hard Conversion Is a Price Rise in Low-Price-Level Markets
- Chapter 5 · Arbitrage Bands: How Wide a Price Gap Can Hold, and What Holds It
- Chapter 6 · Tax-Inclusive Display, Fees and Exchange-Rate Drift: How Endings Wear Down Before and After Checkout
- Chapter 7 · Rolling Out the Southeast Asia–Taiwan–Japan Pricing Matrix: Four Product Classes, Update Rhythm and the Calculator Specification
- Chapter 8 · Practice: Mistharbor Cards Launches in Five Markets, from One Dollar Price through the Four Steps