What does Caprylic Transport and Brain Ketone Uptake conclude, in numbers, about “Dose, Sampling and Individual Differences: How a Peak Gets Measured”?

Answer: Chapter 4 shows that doubling the dose gives 1.866 times the peak, and that reading every 15 minutes and taking the highest value inflates the peak to 1.126 times its true size.

Scope of the numbers: Its parameters are illustrative; all calculations are generated by its programs; it is not medical advice and makes no claim of any health or cognitive benefit. Marked boxes separate published evidence, runnable Python calculations (21 programs), classical sources and the author's hypotheses.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 1.866, 15

tricaprylin, single dose; saturable hepatic step KM_H = 40 mmol
dose gCmaxTmax minCmax per gvs linearlinear Cmax
50.14062.20.02800.9780.143
100.27365.70.02730.9520.286
150.39669.50.02640.9220.430
200.50973.50.02540.8880.573
300.70082.20.02330.8150.859
400.84790.90.02120.7391.146
doubling 10 g to 20 g multiplies Cmax by 1.866
linear model Cmax per g = 0.0286
Show the full program
# Chapter 4. p41: dose against peak when hepatic oxidation saturates
# C8 model of p32, but the hepatic step is Michaelis-Menten in the hepatic
# acid pool H: v = VMAX H / (KM_H + H), with VMAX / KM_H = 0.06 per minute
# so that small doses behave as in p32. KM_H = 40 mmol is illustrative.
# Clearance of ketones stays first order (ke 0.05 per minute, 35 L).
# Doses are grams of tricaprylin taken at once.
import math

KA, KP, KE, VD, PHI, YLD = 0.015, 0.3, 0.05, 35.0, 0.5, 2.0
KM_H = 40.0
VMAX = 0.06 * KM_H
F8 = 1.0 / (1.0 + math.exp((8 - 11.5) / 0.8))
KL, H_LY, DT, T_END = 0.0125, 0.2, 0.5, 720.0
MW8 = 470.69


def run(grams, saturable):
    def hep_rate(h):
        return VMAX * h / (KM_H + h) if saturable else 0.06 * h

    def d(s):
        lum, por, y1, y2, y3, hep, ket = s
        v = hep_rate(hep)
        return [-KA * lum, KA * F8 * lum - KP * por,
                KA * (1.0 - F8) * lum - KL * y1, KL * (y1 - y2),
                KL * (y2 - y3), KP * por + H_LY * KL * y3 - v,
                PHI * YLD * v - KE * ket]
    s = [3000.0 * grams / MW8, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
    c = [0.0]
    for _ in range(int(T_END / DT)):
        k1 = d(s)
        k2 = d([a + 0.5 * DT * b for a, b in zip(s, k1)])
        k3 = d([a + 0.5 * DT * b for a, b in zip(s, k2)])
        k4 = d([a + DT * b for a, b in zip(s, k3)])
        s = [a + DT / 6.0 * (b + 2.0 * x + 2.0 * e + g)
             for a, b, x, e, g in zip(s, k1, k2, k3, k4)]
        c.append(s[6] / VD)
    i = max(range(len(c)), key=lambda j: c[j])
    y0, y1, y2 = c[i - 1], c[i], c[i + 1]
    off = 0.5 * (y0 - y2) / (y0 - 2.0 * y1 + y2)
    return y1 - 0.25 * (y0 - y2) * off, (i + off) * DT


lin5 = run(5.0, False)[0] / 5.0
print("tricaprylin, single dose; saturable hepatic step KM_H = 40 mmol")
print("dose g   Cmax    Tmax min   Cmax per g   vs linear   linear Cmax")
for g in (5, 10, 15, 20, 30, 40):
    cm, tm = run(float(g), True)
    lin = run(float(g), False)[0]
    print("{:6d}  {:6.3f}  {:8.1f}  {:10.4f}  {:9.3f}  {:10.3f}".format(
        g, cm, tm, cm / g, cm / lin, lin))
print()
a, b = run(10.0, True)[0], run(20.0, True)[0]
print("doubling 10 g to 20 g multiplies Cmax by {:.3f}".format(b / a))
print("linear model Cmax per g = {:.4f}".format(lin5))

Single source and citation

Fan, Y. (2026). Portal Transport of Caprylic Triglycerides, Rapid Hepatic Oxidation and Monocarboxylate-Transporter Kinetics of Brain Ketone Uptake (Version 1.0.0), Chapter 4: Dose, Sampling and Individual Differences: How a Peak Gets Measured. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-166 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026166,
  author    = {Fan, Yafu},
  title     = {Portal Transport of Caprylic Triglycerides, Rapid Hepatic Oxidation and Monocarboxylate-Transporter Kinetics of Brain Ketone Uptake},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book