What does Caprylic Transport and Brain Ketone Uptake conclude, in numbers, about “A First-Order Chain of Four Compartments: the Bateman Solution, Peak and Time to Peak”?

Answer: Chapter 3 writes the closed-form solution of a first-order chain of four compartments (lumen, portal vein, liver, blood ketone): 20 g of tricaprylin gives a peak increment of about 0.573 mmol/L, 11.8 times that of trilaurin and 33.0 minutes earlier, while the elasticity of the peak with respect to portal transport is only 0.007.

Scope of the numbers: Its parameters are illustrative; all calculations are generated by its programs; it is not medical advice and makes no claim of any health or cognitive benefit. Marked boxes separate published evidence, runnable Python calculations (21 programs), classical sources and the author's hypotheses.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 0.573, 11.8, 20, 33.0

20 g of pure triglyceride; increment over baseline
chain Cmax mmol/L Tmax min AUC0-240 AUC0-600 C(240)/Cmax
C80.573 59.0 68.0 72.1 0.104
C100.280 73.6 40.4 47.5 0.254
C120.048 92.0 8.3 13.2 0.557
Cmax ratio C8 / C102.05
Cmax ratio C8 / C1211.8
Tmax lag C12 minus C833.0 min

Key formula

\[A_4(t) = D\,k_a k_p k_h \sum_{i=1}^{4} \frac{e^{-k_i t}}{\prod_{j \neq i}(k_j - k_i)}\]
Show the full program
# Chapter 3. p32: blood beta-hydroxybutyrate peak and time to peak, C8 to C12
# Seven linear compartments: lumen, portal blood, three lymph and
# chylomicron stages, hepatic acid pool, blood ketone pool. Chain-length
# rules (illustrative): portal share f(n) logistic (p11), uptake
# ka = 0.015 (8/n)^1.5, hepatic oxidation kh = 0.06 (8/n)^1.7, ketogenic
# share phi = 0.5 / (1 + ((n - 8) / 3)^2) for n > 8, yield n/4 per acid
# (p21); kp 0.3, kl 0.0125, lymph-to-liver share 0.2, ke 0.05 per minute,
# volume 35 L. Dose 20 g of the pure triglyceride. RK4, step 0.5 min;
# the peak is refined by a parabola through the three highest points.
import math

KP, KL, H_LY, KE, VD = 0.3, 0.0125, 0.2, 0.05, 35.0
DT, T_END = 0.5, 600.0


def mw_tg(n):
    return 12.011 * (3 * n + 3) + 1.008 * (6 * n + 2) + 15.999 * 6


def chain_par(n):
    f = 1.0 / (1.0 + math.exp((n - 11.5) / 0.8))
    ka = 0.015 * (8.0 / n) ** 1.5
    kh = 0.06 * (8.0 / n) ** 1.7
    phi = 0.5 if n <= 8 else 0.5 / (1.0 + ((n - 8) / 3.0) ** 2)
    return f, ka, kh, phi


def curve(n, grams):
    f, ka, kh, phi = chain_par(n)
    gain = phi * n / 4.0

    def d(s):
        lum, por, y1, y2, y3, hep, ket = s
        return [-ka * lum, ka * f * lum - KP * por,
                ka * (1.0 - f) * lum - KL * y1, KL * (y1 - y2),
                KL * (y2 - y3), KP * por + H_LY * KL * y3 - kh * hep,
                gain * kh * hep - KE * ket]
    s = [3000.0 * grams / mw_tg(n), 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
    out = [0.0]
    for _ in range(int(T_END / DT)):
        k1 = d(s)
        k2 = d([a + 0.5 * DT * b for a, b in zip(s, k1)])
        k3 = d([a + 0.5 * DT * b for a, b in zip(s, k2)])
        k4 = d([a + DT * b for a, b in zip(s, k3)])
        s = [a + DT / 6.0 * (b + 2.0 * c + 2.0 * e + g)
             for a, b, c, e, g in zip(s, k1, k2, k3, k4)]
        out.append(s[6] / VD)
    return out


def peak(c):
    i = max(range(len(c)), key=lambda j: c[j])
    y0, y1, y2 = c[i - 1], c[i], c[i + 1]
    den = y0 - 2.0 * y1 + y2
    off = 0.5 * (y0 - y2) / den
    return y1 - 0.25 * (y0 - y2) * off, (i + off) * DT


def auc(c, t_stop):
    m = int(t_stop / DT)
    return math.fsum(0.5 * (c[i] + c[i + 1]) * DT for i in range(m))


print("20 g of pure triglyceride; increment over baseline")
print("chain  Cmax mmol/L  Tmax min  AUC0-240  AUC0-600  C(240)/Cmax")
res = {}
for n in (8, 10, 12):
    c = curve(n, 20.0)
    cmax, tmax = peak(c)
    res[n] = (cmax, tmax)
    print("C{:<5d}{:10.3f}  {:9.1f}  {:8.1f}  {:8.1f}  {:10.3f}".format(
        n, cmax, tmax, auc(c, 240.0), auc(c, 600.0),
        c[int(240 / DT)] / cmax))
print()
print("Cmax ratio C8 / C10 = {:.2f}".format(res[8][0] / res[10][0]))
print("Cmax ratio C8 / C12 = {:.1f}".format(res[8][0] / res[12][0]))
print("Tmax lag C12 minus C8 = {:.1f} min".format(res[12][1] - res[8][1]))

Single source and citation

Fan, Y. (2026). Portal Transport of Caprylic Triglycerides, Rapid Hepatic Oxidation and Monocarboxylate-Transporter Kinetics of Brain Ketone Uptake (Version 1.0.0), Chapter 3: A First-Order Chain of Four Compartments: the Bateman Solution, Peak and Time to Peak. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-166 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026166,
  author    = {Fan, Yafu},
  title     = {Portal Transport of Caprylic Triglycerides, Rapid Hepatic Oxidation and Monocarboxylate-Transporter Kinetics of Brain Ketone Uptake},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book