What does Escapement Errors and Watch Premium Half-Lives conclude, in numbers, about “Hairspring Thermal Coefficients: Elastic Modulus, Expansion and the Middle-Temperature Error”?

Answer: The thermal coefficient of rate is 86400 times half the algebraic sum of the modulus coefficient, three times the spring's expansion and minus twice the balance's expansion. A steel spring with a brass balance gives −10.886 seconds a day per degree and loses 163.3 seconds a day over 15 degrees; a tuned iron-nickel spring gives 0.518 and an oxide-tuned silicon spring −0.009. Over an illustrative day the steel spring accumulates 1632.9 seconds a month, iron-nickel 77.7, silicon −1.3 and uncompensated quartz 3.6. A COSC-style linear criterion cannot see the middle-temperature error, which with a large quadratic coefficient costs 1.944 seconds a day at 23 degrees.

Scope of the numbers: Marked boxes separate published evidence, runnable Python calculations (22 programs), classical sources and the author's hypotheses.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. printed values that match the answer: 0.518, 15

combination (ppm/K)easabC s/d/KCOSC
steel spring, brass bal-25012.019.0-10.886fail
steel spring, Be-Cu bal-25012.017.0-10.714fail
Fe-Ni tuned, Be-Cu bal228.017.00.518pass
bare silicon, Be-Cu bal-642.617.0-3.897fail
oxide-tuned Si, Be-Cu262.617.0-0.009pass
e for zero, Fe-Ni spring + Be-Cu balance: +10.0 ppm/K
e window allowed by COSC: +-13.9 ppm/K
steel over a 15 K swing: -163.3 s/d

Key formula

\[C = 86400 \times \tfrac{1}{2}\,(e + 3\alpha_s - 2\alpha_b)\]
Show the full program
# Chapter 3. p31: thermal coefficient of rate from spring and balance
# 模型:k 正比于 E b h^3 / L,受热后 b、h、L 都按游丝线胀系数 as 伸长,
# 故 dk/k = e + 3 as(e = 弹性模量温度系数);I 正比于 m r^2,
# dI/I = 2 ab(ab = 摆轮线胀系数)。日差温度系数
# C = 86400 * 0.5 * (e + 3 as - 2 ab),单位 秒/日/摄氏度。
# 材料常数均为示意量级,不是任何牌号的规格书数值。
DAY = 86400.0
COSC_THERMAL = 0.6

COMBOS = [   # (label, e per K, alpha spring, alpha balance)
    ("steel spring, brass bal", -2.5e-4, 1.2e-5, 1.9e-5),
    ("steel spring, Be-Cu bal", -2.5e-4, 1.2e-5, 1.7e-5),
    ("Fe-Ni tuned, Be-Cu bal", 2.2e-5, 8.0e-6, 1.7e-5),
    ("bare silicon, Be-Cu bal", -6.4e-5, 2.6e-6, 1.7e-5),
    ("oxide-tuned Si, Be-Cu", 2.6e-5, 2.6e-6, 1.7e-5),
]


def coeff(e, a_s, a_b):
    return DAY * 0.5 * (e + 3 * a_s - 2 * a_b)


print("combination (ppm/K)        e      as    ab  C s/d/K  COSC")
for name, e, a_s, a_b in COMBOS:
    c = coeff(e, a_s, a_b)
    ok = "pass" if abs(c) <= COSC_THERMAL else "fail"
    print("{:24s}{:6.0f}{:6.1f}{:6.1f}{:9.3f}  {}".format(
        name, e * 1e6, a_s * 1e6, a_b * 1e6, c, ok))
a_s, a_b = 8.0e-6, 1.7e-5
e_star = 2 * a_b - 3 * a_s
band = 2 * COSC_THERMAL / DAY
print("e for zero, Fe-Ni spring + Be-Cu balance: {:+.1f} ppm/K".format(
    e_star * 1e6))
print("e window allowed by COSC: +-{:.1f} ppm/K".format(band * 1e6))
print("steel over a 15 K swing: {:.1f} s/d".format(
    15 * coeff(-2.5e-4, 1.2e-5, 1.9e-5)))

Single source and citation

Fan, Y. (2026). Escapement Isochronism Errors, Hairspring Thermal Coefficients and the Half-Life of Scarcity Premiums in the Secondary Watch Market (Version 1.0.0), Chapter 3: Hairspring Thermal Coefficients: Elastic Modulus, Expansion and the Middle-Temperature Error. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-207 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026207,
  author    = {Fan, Yafu},
  title     = {Escapement Isochronism Errors, Hairspring Thermal Coefficients and the Half-Life of Scarcity Premiums in the Secondary Watch Market},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book