What does Escapement Errors and Watch Premium Half-Lives conclude, in numbers, about “Two Ledgers: the Order-of-Magnitude Gap between Chronometer Certificates and Quartz, and the Concentration of "Holding Value"”?

Answer: Chapter 1 sets out two ledgers: the mechanical chronometer tolerance is 12.0 times wider than a quartz watch erring by 15 seconds a month and 85.7 times wider than the quartz chronometer standard; collectible watches in auction samples show positive returns (a published study reports 5.5 % a year in real terms), while in an illustrative model 0.816 of all gains sit in a tenth of the references.

Scope of the numbers: Marked boxes separate published evidence, runnable Python calculations (22 programs), classical sources and the author's hypotheses.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 12.0, 15, 85.7

standardworst s/dppmx COSClog10
COSC mech6.00069.441.00.00
METAS cased5.00057.871.20.08
Rolex cased2.00023.153.00.48
Astron 19690.1671.9336.01.56
COSC quartz0.0700.8185.71.93
cheap quartz, illustrative monthly error scan
q 10 s/mo0.3333.8618.01.26
q 15 s/mo0.5005.7912.01.08
q 20 s/mo0.6677.729.00.95
q 30 s/mo1.00011.576.00.78
band width COSC mech / COSC quartz = 71.4
ratio stays >= 10 while quartz <= 18.0 s/month
Show the full program
# Chapter 1. p11: accuracy ladder, chronometer tolerances against quartz
# 模型:把各项标准的日差容差换算为最坏日差(秒/日)与百万分率(ppm),
# 再以天文台机械表上限 +6 秒/日为基准求倍数与常用对数(数量级)。
# 出处:COSC(依据 ISO 3159)机械机芯平均日差 -4/+6、温度系数 0.6,
# COSC 石英 ±0.07 秒/日(带宽 0.14);
# 精工 Quartz Astron(1969)月差 ±5 秒;METAS 整表 0/+5、劳力士整表
# -2/+2 为厂商公开标准。廉价石英月差为示意扫描,读者应换成实测值。
import math

DAY = 86400.0
REF = 6.0                     # COSC mechanical worst case, s/day
SPECS = [                     # (label, low s/d, high s/d)
    ("COSC mech", -4.0, 6.0),
    ("METAS cased", 0.0, 5.0),
    ("Rolex cased", -2.0, 2.0),
    ("Astron 1969", -5.0 / 30.0, 5.0 / 30.0),
    ("COSC quartz", -0.07, 0.07),
]


def row(name, worst):
    ratio = REF / worst
    return "{:13s}{:9.3f}{:9.2f}{:8.1f}{:8.2f}".format(
        name, worst, worst / DAY * 1e6, ratio, math.log10(ratio))


print("standard     worst s/d      ppm  x COSC   log10")
for name, lo, hi in SPECS:
    print(row(name, max(abs(lo), abs(hi))))
print("cheap quartz, illustrative monthly error scan")
for m in (10.0, 15.0, 20.0, 30.0):
    print(row("q {:.0f} s/mo".format(m), m / 30.0))
band_mech = 6.0 - (-4.0)
band_q = 0.07 - (-0.07)
print("band width COSC mech / COSC quartz = {:.1f}".format(
    band_mech / band_q))
print("ratio stays >= 10 while quartz <= {:.1f} s/month".format(
    REF / 10.0 * 30.0))

Single source and citation

Fan, Y. (2026). Escapement Isochronism Errors, Hairspring Thermal Coefficients and the Half-Life of Scarcity Premiums in the Secondary Watch Market (Version 1.0.0), Chapter 1: Two Ledgers: the Order-of-Magnitude Gap between Chronometer Certificates and Quartz, and the Concentration of "Holding Value". 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-207 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026207,
  author    = {Fan, Yafu},
  title     = {Escapement Isochronism Errors, Hairspring Thermal Coefficients and the Half-Life of Scarcity Premiums in the Secondary Watch Market},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book