5D Library › Interoceptive Decoupling, Salience-Network Switching and Autonomic Visceral Restoration · 中文

Chapter 5. How Much Can Blood Flow Change: The Fourth Power and Autoregulation

The previous chapter showed that a conclusion about the pelvis cannot be drawn from a measurement of the heart. This chapter steps back and asks a more basic question: suppose the sympathetic vasoconstrictor drive really were withdrawn — how much could blood flow change? That is a question of fluid mechanics and vascular physiology, independent of attention, and the answer sets an upper bound on the fifth and sixth links of the original claim.

The fourth-power law

Evidence

The Hagen–Poiseuille law. For laminar flow of a Newtonian fluid of viscosity μ\mu in a rigid circular tube of length LL and radius rr, the flow is Q=πr4ΔP/(8μL)Q = \pi r^4 \Delta P / (8\mu L): conductance is proportional to the fourth power of the radius. Standard cardiovascular physiology texts give this relation and the limits of its applicability in the circulation — blood is non-Newtonian, vessels are elastic, flow at branches is not laminar (Levick 2010).

The fourth-power law has consequences in two directions, and discussion usually remembers only one of them.

Calculation

# Chapter 5. What a change in vascular smooth-muscle tone can and cannot do to
# flow. Hagen-Poiseuille for a single tube: Q = pi r^4 dP / (8 mu L), so
# conductance scales as r^4 and a 19 % dilation doubles flow at fixed
# pressure. But organs are not single tubes at fixed pressure: they sit in
# parallel beds fed by a shared pressure, so dilating one bed raises total
# conductance, LOWERS perfusion pressure if cardiac output is fixed, and
# steals flow from the others. The program does both calculations and shows
# how different the answers are. Physiology-free algebra; illustrative
# numbers, not measurements.
import math

def q_single(ratio):
    """Flow relative to baseline for a radius ratio, fixed driving
    pressure."""

    return ratio ** 4

def radius_for_flow(fold):
    return fold ** 0.25

# parallel beds: conductances G_i (arbitrary units), one shared pump
BEDS = [("pelvic / visceral", 1.0), ("skeletal muscle", 3.0),
        ("splanchnic", 2.5), ("skin", 1.0), ("the rest", 4.0)]

def parallel(dilate_factor, fixed="output", co=1.0, map_mmHg=90.0):
    """dilate_factor multiplies the conductance of bed 0 only.
    fixed='output' holds cardiac output constant (pressure falls);
    fixed='pressure' holds mean pressure constant (output rises)."""
    g = [
        v * (dilate_factor if i == 0 else 1.0)
        for i, (_, v) in enumerate(BEDS)
    ]
    gt = math.fsum(g)
    if fixed == "pressure":
        p = map_mmHg
        flows = [p * x for x in g]
    else:
        p = co * map_mmHg * math.fsum(v for _, v in BEDS) / gt
        flows = [p * x for x in g]
    return p, flows, gt

if __name__ == "__main__":
    print("A. one tube, fixed driving pressure: Q proportional to r^4")
    print("   radius change   flow ratio")
    for d in (-0.20, -0.10, -0.05, 0.0, 0.05, 0.10, 0.19, 0.30):
        print("   {:+12.0%} {:13.3f}".format(d, q_single(1 + d)))
    print("   a doubling of flow needs r x {:.4f}, i.e. {:+.1%}"
          .format(radius_for_flow(2.0), radius_for_flow(2.0) - 1))
    print("   a 10 % flow rise needs r x {:.4f}, i.e. {:+.2%}"
          .format(radius_for_flow(1.10), radius_for_flow(1.10) - 1))

    print(
        "\nB. five parallel beds, conductance of the first bed multiplied"
        " by k"
    )
    base_p, base_f, base_g = parallel(1.0)
    for fixed, label in (("pressure", "mean pressure held constant"),
                         ("output", "cardiac output held constant")):
        print("\n   {}:".format(label))
        print("      k     pressure   bed-1 flow   other beds   bed-1 share")
        for k in (1.0, 1.5, 2.0, 3.0, 5.0):
            p, f, gt = parallel(k, fixed=fixed)
            others = math.fsum(f[1:])
            print(
                "      {:4.1f} {:10.1f} {:12.3f} {:12.3f} {:12.1%}".format(
                    k,
                    p,
                    f[0] / base_f[0],
                    others / math.fsum(base_f[1:]),
                    f[0] / math.fsum(f),
                )
            )

    print(
        "\nWith pressure held constant, doubling the conductance of one"
        " small bed"
    )
    print(
        "doubles its flow and leaves the others alone, but total output must"
        " rise."
    )
    print(
        "With output held constant, the same dilation raises that bed's flow"
        " by much"
    )
    print(
        "less and takes flow from every other bed. Which calculation applies"
        " depends"
    )
    print(
        "on what the circulation actually does, and neither is settled by"
        " asserting"
    )
    print("that 'sympathetic tone was released'. Chapter 5 returns to this.")

    print(
        "\nC. how large a conductance change could a measurement even detect?"
    )
    print(
        "   If bed-1 flow is measured with a 12 % coefficient of"
        " variation, the"
    )
    print(
        "   smallest fold change detectable at 80 % power with n = 20 paired"
    )
    print("   observations is about:")
    cv, n = 0.12, 20
    # paired t test on log flow: detectable log difference = (1.96 + 0.84) *
    # cv*sqrt(2)/sqrt(n)
    d = (1.96 + 0.8416) * cv * math.sqrt(2) / math.sqrt(n)
    print("      {:+.1%} in flow, i.e. {:+.2%} in radius"
          .format(math.exp(d) - 1, math.exp(d) ** 0.25 - 1))
# A. one tube, fixed driving pressure: Q proportional to r^4
#    radius change   flow ratio
#            -20%         0.410
#            -10%         0.656
#             -5%         0.815
#             +0%         1.000
#             +5%         1.216
#            +10%         1.464
#            +19%         2.005
#            +30%         2.856
#    a doubling of flow needs r x 1.1892, i.e. +18.9%
#    a 10 % flow rise needs r x 1.0241, i.e. +2.41%
#
# B. five parallel beds, conductance of the first bed multiplied by k
#
#    mean pressure held constant:
#       k     pressure   bed-1 flow   other beds   bed-1 share
#        1.0       90.0        1.000        1.000         8.7%
#        1.5       90.0        1.500        1.000        12.5%
#        2.0       90.0        2.000        1.000        16.0%
#        3.0       90.0        3.000        1.000        22.2%
#        5.0       90.0        5.000        1.000        32.3%
#
#    cardiac output held constant:
#       k     pressure   bed-1 flow   other beds   bed-1 share
#        1.0       90.0        1.000        1.000         8.7%
#        1.5       86.2        1.438        0.958        12.5%
#        2.0       82.8        1.840        0.920        16.0%
#        3.0       76.7        2.556        0.852        22.2%
#        5.0       66.8        3.710        0.742        32.3%
#
# With pressure held constant, doubling the conductance of one small bed
# doubles its flow and leaves the others alone, but total output must rise.
# With output held constant, the same dilation raises that bed's flow by much
# less and takes flow from every other bed. Which calculation applies depends
# on what the circulation actually does, and neither is settled by asserting
# that 'sympathetic tone was released'. Chapter 5 returns to this.
#
# C. how large a conductance change could a measurement even detect?
#    If bed-1 flow is measured with a 12 % coefficient of variation, the
#    smallest fold change detectable at 80 % power with n = 20 paired
#    observations is about:
#       +11.2% in flow, i.e. +2.69% in radius

Section A: a 19 % increase in radius doubles flow; and a mere 10 % rise in flow requires a 2.41 % increase in radius. The first is often quoted to show that tiny vascular changes produce large flow changes; the second is the other face of the same fact, and it is the measurement difficulty. Section C gives it: if blood flow in a bed is measured with a coefficient of variation of 12 % and there are 20 paired observations, the smallest change detectable at 80 % power is +11.2 % in flow, corresponding to +2.69 % in radius. In other words the detectable radius change is very small, so “no change was detected” does not mean the radius did not change, and “an enormous flow change was measured” should first raise a suspicion about the measurement.

Section B is the more important correction. Organs are not single tubes and do not operate at fixed pressure: several beds lie in parallel sharing one pump. Multiply the conductance of the first bed (taken here as the visceral/pelvic bed, about 8.7 % of the total) by kk:

  • with mean pressure held constant, that bed’s flow rises in proportion to kk (2.000-fold at k=2k=2) and the others are unchanged, but total output must rise;
  • with cardiac output held constant, the same dilation raises that bed’s flow only to 1.840-fold, pressure falls from 90 to 82.8 mmHg, and the other beds fall to 0.920-fold — flow has been taken from them.

Which calculation applies depends on what the circulation actually does, and that is not settled by the sentence “sympathetic tone was released”. In someone lying quietly, cardiac output does not rise substantially to serve a pelvic dilation, so reality is closer to the second case: local dilation at the expense of flow elsewhere. Joyner and Casey’s review of blood-flow regulation in exercise writes this as “a hierarchy of competing physiological needs” (Joyner and Casey 2015).

Autoregulation absorbs part of the response

There is a second constraint. Organ blood flow does not follow conductance passively; local mechanisms hold it within a range.

Evidence

Myogenic autoregulation (review). Vascular smooth muscle responds to stretch (to transmural pressure) by contracting: the myogenic response, which keeps organ blood flow relatively constant over a fairly wide range of perfusion pressures. Johnson’s review of autoregulation is the classic account (Johnson 1986), and Davis and Hill review the signalling mechanisms of the myogenic response (Davis and Hill 1999). Segal reviews flow regulation at the microcirculatory level, including ascending dilation and electrical coupling between vessels (Segal 2005).

Written as a first-order tone regulator, tone relaxes toward a set point raised by vasoconstrictor drive uu and by wall stress (indexed here by flow).

Calculation

# Chapter 5. Myogenic autoregulation damps whatever the autonomic nervous
# system does. Vessel tone T relaxes toward a set point raised by
# vasoconstrictor drive u and by wall stress (here indexed by flow, which is
# how autoregulation responds to overperfusion):
#   dT/dt = (T_inf - T) / tau,   T_inf = T0 + ku * u + gain * (Q / Qref - 1)
#   G = Gmax / (1 + T),          Q = G * P      (P = perfusion pressure, held
#   fixed)
# A step release of constrictor drive (u: 1 -> 0) is integrated with RK4 (dt =
# 0.05 s). The autoregulatory term needs time to build, so flow approaches its
# new level MONOTONICALLY, with no overshoot (a first-order regulator whose
# stress term builds on the same time scale as the tone it corrects cannot
# produce a transient peak): the program reports the settled rise and the
# fraction the regulator gives back. Author's model; illustrative parameters,
# not measurements.
import math

GMAX, T0, KU, P = 1.0, 0.6, 0.9, 90.0
TAU, DT, T_END = 18.0, 0.05, 600.0

def conductance(T):
    return GMAX / (1.0 + T)

def steady_tone(u, gain, Qref, iters=400):
    """Solve T = T0 + ku u + gain (G(T) P / Qref - 1) by fixed-point
    iteration."""

    T = T0 + KU * u
    for _ in range(iters):
        T = 0.5 * T + 0.5 * (
            T0 + KU * u + gain * (conductance(T) * P / Qref - 1.0)
        )
    return T

def run(gain):
    # baseline: constrictor drive on, autoregulation at its own set point
    # reference flow for the stress term
    Qref = conductance(T0 + KU * 1.0) * P
    T = steady_tone(1.0, gain, Qref)
    q0 = conductance(T) * P
    f = (
        lambda T, u: (
            T0 + KU * u + gain * (conductance(T) * P / Qref - 1.0) - T
        )
        / TAU
    )
    peak = q0
    for i in range(int(T_END / DT)):
        k1 = f(T, 0.0)
        k2 = f(T + DT / 2 * k1, 0.0)
        k3 = f(T + DT / 2 * k2, 0.0)
        k4 = f(T + DT * k3, 0.0)
        T += DT / 6 * (k1 + 2 * k2 + 2 * k3 + k4)
        peak = max(peak, conductance(T) * P)
    return q0, peak, conductance(T) * P

if __name__ == "__main__":
    print("Step release of vasoconstrictor drive, u: 1.0 -> 0.0,")
    print("pressure fixed at {:.0f} mmHg".format(P))
    print(
        "\n   gain   baseline Q   settled Q   settled rise   damping vs"
        " gain 0"
    )
    results = {}
    for gain in (0.0, 0.3, 0.6, 1.0, 2.0):
        q0, pk, ss = run(gain)
        rise = ss / q0 - 1
        results[gain] = rise
        damp = (
            1 - rise / results[0.0] if results[0.0] > 1e-12 else float("nan")
        )
        print("   {:5.2f} {:12.3f} {:12.3f} {:14.1%} {:19.1%}"
              .format(gain, q0, ss, rise, damp))

    print(
        "\nWith no autoregulation the full release of constrictor drive"
        " raises flow"
    )
    print(
        "by {:.0%}. Flow-sensing gain 0.6 cuts that to {:.0%} and gain 2.0 to"
        " {:.0%},".format(results[0.0], results[0.6], results[2.0])
    )
    print(
        "so between {:.0%} and {:.0%} of the response is absorbed by the"
        " regulator.".format(
            1 - results[0.6] / results[0.0], 1 - results[2.0] / results[0.0]
        )
    )
    print(
        "\nNote what the model does NOT do: the approach is monotonic,"
        " with no"
    )
    print(
        "overshoot. A first-order regulator whose stress term builds on the"
        " same time"
    )
    print(
        "scale as the tone it corrects cannot produce a transient peak;"
        " getting one"
    )
    print(
        "requires a faster sensor than effector, which this model does not"
        " claim and"
    )
    print("which is not established for the beds at issue.")
    print(
        "\nTwo consequences for Chapter 6. First, a model that predicts a"
        " large"
    )
    print(
        "SUSTAINED regional flow rise from autonomic withdrawal alone has to"
        " say why"
    )
    print(
        "autoregulation does not absorb most of it, and the gain is not known"
        " here."
    )
    print(
        "Second, because the approach has a time constant of tens of seconds,"
        " WHEN"
    )
    print(
        "flow is measured largely determines the answer: the table below"
        " shows the"
    )
    print(
        "same manoeuvre reading as a 9 % rise at 5 s and a 37 % rise at 60 s."
    )

    print("\nTime course at gain 0.6, flow relative to baseline:")
    gain = 0.6
    Qref = conductance(T0 + KU * 1.0) * P
    T = steady_tone(1.0, gain, Qref)
    q0 = conductance(T) * P
    f = (
        lambda T, u: (
            T0 + KU * u + gain * (conductance(T) * P / Qref - 1.0) - T
        )
        / TAU
    )
    marks = [0.0, 5.0, 15.0, 30.0, 60.0, 120.0, 300.0, 600.0]
    row = []
    for i in range(int(T_END / DT) + 1):
        t = i * DT
        if marks and abs(t - marks[0]) < DT / 2:
            row.append((marks.pop(0), conductance(T) * P / q0))
        k1 = f(T, 0.0)
        k2 = f(T + DT / 2 * k1, 0.0)
        k3 = f(T + DT / 2 * k2, 0.0)
        k4 = f(T + DT * k3, 0.0)
        T += DT / 6 * (k1 + 2 * k2 + 2 * k3 + k4)
    print("   t (s)    " + "".join("{:8.0f}".format(t) for t, _ in row))
    print("   Q / Q0   " + "".join("{:8.3f}".format(v) for _, v in row))
# Step release of vasoconstrictor drive, u: 1.0 -> 0.0,
# pressure fixed at 90 mmHg
#
#    gain   baseline Q   settled Q   settled rise   damping vs gain 0
#     0.00       36.000       56.250          56.2%                0.0%
#     0.30       36.000       51.938          44.3%               21.3%
#     0.60       36.000       49.373          37.1%               34.0%
#     1.00       36.000       47.137          30.9%               45.0%
#     2.00       36.000       44.010          22.2%               60.4%
#
# With no autoregulation the full release of constrictor drive raises flow
# by 56%. Flow-sensing gain 0.6 cuts that to 37% and gain 2.0 to 22%,
# so between 34% and 60% of the response is absorbed by the regulator.
#
# Note what the model does NOT do: the approach is monotonic, with no
# overshoot. A first-order regulator whose stress term builds on the same time
# scale as the tone it corrects cannot produce a transient peak; getting one
# requires a faster sensor than effector, which this model does not claim and
# which is not established for the beds at issue.
#
# Two consequences for Chapter 6. First, a model that predicts a large
# SUSTAINED regional flow rise from autonomic withdrawal alone has to say why
# autoregulation does not absorb most of it, and the gain is not known here.
# Second, because the approach has a time constant of tens of seconds, WHEN
# flow is measured largely determines the answer: the table below shows the
# same manoeuvre reading as a 9 % rise at 5 s and a 37 % rise at 60 s.
#
# Time course at gain 0.6, flow relative to baseline:
#    t (s)           0       5      15      30      60     120     300     600
#    Q / Q0      1.000   1.092   1.226   1.323   1.367   1.371   1.371   1.371

The result: with no autoregulation, full withdrawal of vasoconstrictor drive raises flow by 56.2 %; with flow-sensing gain 0.6 that falls to 37.1 % and with gain 2.0 to 22.2 %, so the regulator absorbs 34 % to 60 % of the steady-state response.

Left: time course of flow relative to baseline after withdrawal of vasoconstrictor drive, at autoregulatory gains of 0 (solid), 0.6 (dashed) and 2.0 (dotted); the approach is monotone, with no overshoot. Right: settled rise in flow against autoregulatory gain.

The program also records a negative result: in this first-order model the approach is monotone, with no overshoot. A first-order regulator whose sensor and effector share a time constant cannot produce a transient peak; getting one requires a sensor faster than the effector, which this model does not assume and which is not established for the beds at issue. This book therefore does not claim that there is a transient peak in blood flow after practice.

But the time constant itself has a consequence: the same manoeuvre reads as +9 % at 5 s and +37 % at 60 s. The time of measurement largely determines the answer, and any study claiming to have measured a change in blood flow must specify it in advance.

Note

Limits of the measurement methods. Microcirculation in skin and superficial tissue is commonly measured with laser Doppler flowmetry, whose methodological development and limits — measurement depth, tissue heterogeneity, baseline drift — Rajan and colleagues review (Rajan et al. 2009). Blood flow in deep pelvic organs cannot be measured that way; the available methods (ultrasound Doppler, contrast-enhanced ultrasound, magnetic resonance perfusion) have their own sources of variability. This book recommends no particular protocol; it notes only that Chapter 8 excludes flow indices from the primary outcome entirely, precisely because the available measurements support neither the variability nor the accessibility such a role would require.

The phrase “restoration of microcirculation”

The last link of the original claim is “autonomic restoration of visceral and pelvic microcirculation”. A distinction is needed here, of the same kind as the distinction between a “marker” and “the process itself” in Volume 5.

A change in blood flow and repair of tissue are not the same thing. The first is a haemodynamic quantity on the scale of minutes; the second involves cells, matrix and processes on the scale of days. Even if flow really did rise 37 % and stay there, inferring “restoration” requires a further chain of premises: that the tissue’s function is in fact limited by perfusion, that the improvement in perfusion suffices to lift that limitation, and that the limitation is reversible. This book has no evidence to cite for any of those premises.

Hypothesis · not established

The author’s hypothesis (not established): under quiet supine conditions with breathing pattern controlled, a period of attention practice aimed at not interpreting bodily sensations will not produce a sustained change in measurable peripheral microcirculatory indices beyond measurement variability; any change will be comparable to that of quiet rest of the same duration. What would show it to be wrong: in a pre-registered crossover design with peripheral perfusion indices at fixed times (minute 10 and minute 30, say) as pre-specified outcomes, finding that the 95 % confidence interval for the difference between the practice condition and a rest condition fully matched for duration, posture and breathing guidance excludes zero, and replicating that in an independent sample, would refute it.

Note the direction of the hypothesis: it predicts no difference. That is deliberate. Given the results of the first four chapters — the first link runs backwards, the third adds no information, the fourth does not hold anatomically, and the fifth and sixth are constrained by the fourth-power law and autoregulation — “no measurable sustained difference” is the natural expectation under this framework. Writing it in falsifiable form is more useful than writing a vague optimism; and following Volume 33, it is published whichever way it comes out.

One pathway this book has not examined

So as to leave no gap: here is a possibility this book does not exclude. Pelvic and visceral blood flow is affected by many non-neural factors — local metabolites, endothelium-derived factors, muscle tone and posture, intra-abdominal pressure, and for the pelvis the tone of the pelvic floor. A quiet practice held in a stable posture might perfectly well affect local blood flow by lowering pelvic-floor and abdominal-wall muscle tone, which has nothing to do with sympathetic withdrawal or vagal tone and is a mechanical pathway. This book does not examine it, because it is not part of the original claim; but it is a testable alternative explanation, and in designing the Chapter 8 trial it means that posture and muscle tone must be matched between arms, or they become a confound.

Summary

Even granting that vasoconstrictor drive really is withdrawn, the change in flow is doubly constrained. The fourth-power law: doubling flow needs a 18.9 % increase in radius, a 10 % rise needs 2.41 %, and paired measurement with a 12 % coefficient of variation over 20 pairs detects only a +11.2 % change in flow. Parallel beds: at fixed pressure, local dilation requires total output to rise; at fixed cardiac output, the same dilation raises that bed only to 1.840-fold and presses the others to 0.920-fold. Autoregulation: flow-sensing regulation absorbs 34 % to 60 % of the steady-state response in this model, the approach is monotone with no overshoot, and the time constant makes the same manoeuvre read as +9 % at 5 s and +37 % at 60 s, so the time of measurement must be specified in advance. Finally, “a change in flow” and “repair of tissue” are two different things, the second requiring a chain of premises this book cannot evidence; and a mechanical pathway through pelvic-floor and abdominal-wall tone is an alternative this book does not exclude, and which Chapter 8 must therefore match.

References

Davis, Michael J., and Michael A. Hill. 1999. “Signaling Mechanisms Underlying the Vascular Myogenic Response.” Physiological Reviews 79 (2): 387–423. https://doi.org/10.1152/physrev.1999.79.2.387.
Johnson, Paul C. 1986. “Autoregulation of Blood Flow.” Circulation Research 59 (5): 483–95. https://doi.org/10.1161/01.RES.59.5.483.
Joyner, Michael J., and Darren P. Casey. 2015. “Regulation of Increased Blood Flow (Hyperemia) to Muscles During Exercise: A Hierarchy of Competing Physiological Needs.” Physiological Reviews 95 (2): 549–601. https://doi.org/10.1152/physrev.00035.2013.
Levick, J. Rodney. 2010. An Introduction to Cardiovascular Physiology. 5th ed. London: Hodder Arnold.
Rajan, Vinayakrishnan, Babu Varghese, Ton G. van Leeuwen, and Wiendelt Steenbergen. 2009. “Review of Methodological Developments in Laser Doppler Flowmetry.” Lasers in Medical Science 24: 269–83. https://doi.org/10.1007/s10103-007-0524-0.
Segal, Steven S. 2005. “Regulation of Blood Flow in the Microcirculation.” Microcirculation 12 (1): 33–45. https://doi.org/10.1080/10739680590895028.

Fan, Y. (2026). Interoceptive Decoupling, Salience-Network Switching and Autonomic Visceral Restoration: From Precision-Weighting in the Default Mode Network and the Redistribution of Vagal Tone to the Neurophenomenology of a Non-Judgmental Imagery Stream, with a Textual Examination of neiguan in the Huangdi Neijing [内感受解离、突显网络切换与内脏自主神经修复] (Version 1.0.0). 5D Library. https://doi.org/10.5281/zenodo.24020418 · Licensed under Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0).