关于「从辐照度到温升:辐照度与时间平面上的热边界」,《光剂量双相窗与热边界》给出的定量结论是什么?

结论:第五章用时间常数 252 秒的集总模型把辐照度与温升接起来,照射 1800 秒时热损伤积分边界是 74.8 mW/cm²。

数据口径:书中只写物理量(辐照度、能量密度、温升、占空比)与已发表研究报告的剂量范围,所有设备与参数均为示意,全部计算由书中程序生成。 本书不是医疗建议,不宣称任何功效;任何自我试验须先咨询执业医师。

English version

对照数据表

下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 1800, 74.8

sessionE_max(Omega<=0.001)F thereE_max(T<=43)F there
30 s1090.5 mW/cm232.7 J891.0 mW/cm226.7 J
60 s570.3 mW/cm234.2 J472.0 mW/cm228.3 J
300 s157.2 mW/cm247.1 J143.7 mW/cm243.1 J
900 s91.8 mW/cm282.6 J102.9 mW/cm292.6 J
1800 s74.8 mW/cm2134.7 J100.1 mW/cm2180.1 J
F in J/cm^2. Omega at 100 mW/cm^2 for 1800 s: 6.34e-03

核心公式

\[C\,\frac{dT}{dt} = a\,E - h\,(T - T_0)\]
查看完整验算程序
# Chapter 5. p52: the thermal boundary in the (irradiance, time) plane.
# Lumped model of p51 (T0 33 degC, a 0.5, h 0.005, tau 252 s) and the
# Arrhenius pair of p41. For each session length, bisection finds the
# highest irradiance whose damage integral, counted over the session
# and a cooling tail of 3 tau after switch-off, stays at or below an
# illustrative margin Omega <= 0.001; and the highest irradiance whose
# peak temperature stays at or below 43 degC. The fluence delivered at
# that boundary is printed beside it, to compare with the J/cm^2 scale
# of Chapter 1. Margins are illustrative, not exposure limits.
import math

T0, ABS, H, C = 33.0, 0.5, 0.005, 1.26
TAU = C / H
A, EA, R = 3.1e98, 6.28e5, 8.314
MARGIN = 0.001


def rate(tc):
    return A * math.exp(-EA / (R * (tc + 273.15)))


def simpson(f, a, b, n=2000):
    hstep = (b - a) / n
    terms = [f(a), f(b)]
    for i in range(1, n):
        terms.append((4.0 if i % 2 else 2.0) * f(a + i * hstep))
    return math.fsum(terms) * hstep / 3.0


def omega(e_mw, ts):
    dss = ABS * e_mw / 1000.0 / H
    t_end = dss * (1.0 - math.exp(-ts / TAU))
    on = simpson(lambda t: rate(T0 + dss * (1.0 - math.exp(-t / TAU))),
                 0.0, ts)
    off = simpson(lambda t: rate(T0 + t_end * math.exp(-t / TAU)),
                  0.0, 3.0 * TAU)
    return on + off


def peak_t(e_mw, ts):
    return T0 + ABS * e_mw / 1000.0 / H * (1.0 - math.exp(-ts / TAU))


def bisect(ok, lo=0.0, hi=5000.0):
    for _ in range(60):
        mid = (lo + hi) / 2.0
        if ok(mid):
            lo = mid
        else:
            hi = mid
    return lo


print("session   E_max(Omega<=0.001)  F there   E_max(T<=43)  F there")
for ts in (30.0, 60.0, 300.0, 900.0, 1800.0):
    e1 = bisect(lambda e: omega(e, ts) <= MARGIN)
    e2 = bisect(lambda e: peak_t(e, ts) <= 43.0)
    print("%5.0f s   %13.1f mW/cm2  %6.1f J   %8.1f mW/cm2  %6.1f J"
          % (ts, e1, e1 * ts / 1000.0, e2, e2 * ts / 1000.0))
print("F in J/cm^2. Omega at 100 mW/cm^2 for 1800 s: %.2e"
      % omega(100.0, 1800.0))

唯一数据源与引用

范雅福(Fan, Y.). (2026). 《光生物调节双相剂量窗、阿伦尼乌斯热边界与脉冲调制照射时长母典》第 5 章「从辐照度到温升:辐照度与时间平面上的热边界」(版本 1.0.0). 5D Library. DOI 待发布

DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-287 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026287,
  author    = {Fan, Yafu},
  title     = {The Biphasic Dose Window of Photobiomodulation: Arrhenius Thermal Limits and Exposure Times under Pulsed Modulation},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

本书其他章节结论