关于「最速降线:直线为什么输给摆线」,《非最短路径与推演深度》给出的定量结论是什么?
结论:重力场里,最快的路线是摆线,而不是直线。程序 p11 在边长相等时算出摆线用时是直线的 0.9128,水平距离越长优势越大。程序 p12 显示「先降再走」有最佳深度,降过头反而比直线慢。程序 p13 标出两条边界:目标在正下方时优势消失,摩擦越过 0.793 时摆线停在半路。商业类比只借结构,不借数字,每次使用都要核对势能能否转换、速度能否保持、目标是否够远。
数据口径:书中参数为示意,全部计算由书中程序生成。 本书不是投资意见,也不是任何具体经营决策意见,不承诺任何收益。
对照数据表
下表数字由本章 Python 程序原样打印,可重新运行复现。 程序只用 Python 标准库与结论吻合的打印值: 0.793, 0.9128
| A. Frictionless: shape L/H against the cycloid/line time ratio | |||
| L/H | theta_end | dips_below_B | t_cyc/t_line |
| 0.25 | 0.7364 | no | 0.9924 |
| 0.50 | 1.4014 | no | 0.9720 |
| 1.00 | 2.4120 | no | 0.9128 |
| 1.50 | 3.0688 | no | 0.8517 |
| 2.00 | 3.5084 | yes | 0.7979 |
| 3.00 | 4.0516 | yes | 0.7132 |
| 5.00 | 4.5946 | yes | 0.6027 |
| B. Friction mu on the L=H=1 case (cycloid shape kept) | |||
| mu | t_line | t_cycloid | ratio |
| 0.00 | 0.6386 | 0.5829 | 0.9128 |
| 0.20 | 0.7139 | 0.6411 | 0.8980 |
| 0.40 | 0.8244 | 0.7172 | 0.8700 |
| 0.60 | 1.0096 | 0.8307 | 0.8227 |
| 0.70 | 1.1658 | 0.9241 | 0.7927 |
| 0.80 | 1.4278 | stuck | n/a |
| 0.90 | 2.0193 | stuck | n/a |
| cycloid shape stops beating the line near mu = 0.793 |
查看完整验算程序
# Chapter 1. p13: where the cycloid's advantage shrinks or reverses
# Part A: frictionless cycloid / line time ratio against the shape L/H;
# the cycloid dips below B once theta_end > pi (L/H > pi/2).
# Part B: Coulomb friction mu. Along the path the normal force is
# g cos(a) + v^2 k (k = curvature), so a curved path pays friction for
# its own bending; v^2 is marched piece by piece and each piece time is
# 2 d / (v0 + v1). The cycloid shape is kept fixed, not re-optimised.
# All parameters are illustrative.
import math
G = 9.81
def cyc(L, H):
lo, hi = 1e-9, 2 * math.pi - 1e-9
for _ in range(200):
mid = 0.5 * (lo + hi)
if (mid - math.sin(mid)) / (1 - math.cos(mid)) > L / H:
hi = mid
else:
lo = mid
th = 0.5 * (lo + hi)
return th, H / (1 - math.cos(th))
def fric_time(pts, mu):
# d(v^2)/ds = 2 g sin(a) - 2 mu (g cos(a) + v^2 k); k = turn / length
v2, parts, prev = 0.0, [], None
for (x0, y0), (x1, y1) in zip(pts, pts[1:]):
d = math.hypot(x1 - x0, y1 - y0)
ang = math.atan2(y1 - y0, x1 - x0)
k = 0.0 if prev is None else abs(prev - ang) / d
prev = ang
acc = G * math.sin(ang) - mu * (G * math.cos(ang) + v2 * k)
v2n = v2 + 2 * d * acc
if v2n <= 0:
return None
parts.append(2 * d / (math.sqrt(v2) + math.sqrt(v2n)))
v2 = v2n
return math.fsum(parts)
def pts_cyc(L, H, n=4000):
th, r = cyc(L, H)
return [(r * (t - math.sin(t)), 2 * r * math.sin(t / 2) ** 2)
for t in (th * k / n for k in range(n + 1))]
def pts_line(L, H, n=4000):
return [(L * k / n, H * k / n) for k in range(n + 1)]
print("A. Frictionless: shape L/H against the cycloid/line time ratio")
print(" L/H theta_end dips_below_B t_cyc/t_line")
for ratio in (0.25, 0.5, 1.0, 1.5, 2.0, 3.0, 5.0):
th, r = cyc(ratio, 1.0)
tc = th * math.sqrt(r / G)
tl = math.sqrt(2 * (ratio * ratio + 1.0) / G)
print(" {:5.2f} {:7.4f} {:<12} {:8.4f}".format(
ratio, th, "yes" if th > math.pi else "no", tc / tl))
print("B. Friction mu on the L=H=1 case (cycloid shape kept)")
print(" mu t_line t_cycloid ratio")
for mu in (0.0, 0.2, 0.4, 0.6, 0.7, 0.8, 0.9):
tl = fric_time(pts_line(1.0, 1.0), mu)
tc = fric_time(pts_cyc(1.0, 1.0), mu)
f = lambda t: " stuck " if t is None else "{:8.4f}".format(t)
rt = " n/a" if (tl is None or tc is None) else \
"{:7.4f}".format(tc / tl)
print(" {:4.2f} {} {} {}".format(mu, f(tl), f(tc), rt))
lo, hi = 0.0, 0.95
for _ in range(80):
mid = 0.5 * (lo + hi)
tl = fric_time(pts_line(1.0, 1.0), mid)
tc = fric_time(pts_cyc(1.0, 1.0), mid)
if tc is not None and tl is not None and tc < tl:
lo = mid
else:
hi = mid
print("cycloid shape stops beating the line near mu = {:.3f}".format(lo))唯一数据源与引用
范雅福(Fan, Y.). (2026). 《非最短路径最优解、二阶连锁效应全息推演与周密思考复利母典》第 1 章「最速降线:直线为什么输给摆线」(版本 1.0.0). 5D Library. DOI 待发布
DOI 待发布 · 专著页正式发布后上线(本站暂无专著页) · 5DL-B-384 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026384,
author = {Fan, Yafu},
title = {When the Shortest Path Fails: Brachistochrone Detours, Second-Order Consequence Mapping and Holographic Deep Thinking},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}