What does Studio Falloff and Mixed Colour conclude, in numbers, about “Closing the Loop: StudioTaiwan Lighting Cards, the Lighting Ratio Calculator and a Pre-Registered Test”?

Answer: Chapter 8 gives lighting cards for a StudioTaiwan set, the distilled Lighting Ratio Calculator and a pre-registered test, stating which measurements would overturn the core claim. Marked boxes separate published evidence, runnable Python calculations (21 programs), classical sources and the author's hypotheses.

Scope of the numbers: Parameters are illustrative; all calculations are generated by the book's programs; the book is general business analysis, not individualised business advice. Marked boxes separate published evidence, runnable Python calculations (21 programs), classical sources and the author's hypotheses.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python only

set A headshot: key disc at 1.20 m, fill disc
  ratio 3:1 = 1.58 stops; fill at 1.80 m (inv-sq 1.70)
  background +1.5 m: 2.09 stops under the subject
  lit side 5600 K, shadow 5600 K, gap 0.0 mired
set B tabletop: key rect at 0.60 m, fill rect
  ratio 4:1 = 2.00 stops; fill at 1.27 m (inv-sq 1.04)
  background +1.0 m: 2.28 stops under the subject
  lit side 5600 K, shadow 5600 K, gap 0.0 mired
set C interview: key rect at 1.50 m, fill disc
  ratio 2:1 = 1.00 stops; fill at 0.77 m (inv-sq 0.77)
  background +2.0 m: 2.27 stops under the subject
  lit side 4142 K, shadow 3200 K, gap 71.0 mired
Show the full program
# Chapter 8. p81: lighting cards for three illustrative StudioTaiwan
# sets. Sources are Lambertian discs or rectangles of equal luminance
# (closed forms of p21 and p31); the fill distance for the target ratio
# r = (K + F) / F is found by bisection; the background sits b metres
# behind the subject on the key axis; the lit-side colour is the
# tristimulus mix of p61, its CCT read off the nearest blackbody in
# (u, v); the shadow side is the fill alone. "inv-sq" treats key and
# fill as points of the same axial intensities, as in p42. Targets for
# the set, to be checked with a meter.
import math

LOBES = {"x": ((0.362, 442.0, 0.0624, 0.0374),
               (1.056, 599.8, 0.0264, 0.0323),
               (-0.065, 501.1, 0.0490, 0.0382)),
         "y": ((0.821, 568.8, 0.0213, 0.0247),
               (0.286, 530.9, 0.0613, 0.0322)),
         "z": ((1.217, 437.0, 0.0845, 0.0278),
               (0.681, 459.0, 0.0385, 0.0725))}
C2 = 1.4388e-2
WL = [360.0 + i for i in range(471)]


def cmf(key, lam):
    out = []
    for a, b, g, d in LOBES[key]:
        t = (lam - b) * (g if lam < b else d)
        out.append(a * math.exp(-0.5 * t * t))
    return math.fsum(out)


BAR = {k: [cmf(k, w) for w in WL] for k in ("x", "y", "z")}


def planck_xyz(temp):
    sp = [(w * 1e-9) ** -5 / math.expm1(C2 / (w * 1e-9 * temp)) for w in WL]
    xyz = [math.fsum(s * b for s, b in zip(sp, BAR[k])) for k in "xyz"]
    return [v / xyz[1] for v in xyz]


def uv(xyz):
    d = xyz[0] + 15.0 * xyz[1] + 3.0 * xyz[2]
    return 4.0 * xyz[0] / d, 6.0 * xyz[1] / d


def cct(xyz):
    u, v = uv(xyz)

    def dist(m):
        pu, pv = uv(planck_xyz(1e6 / m))
        return math.hypot(u - pu, v - pv)
    a, b = 50.0, 600.0
    g = (math.sqrt(5.0) - 1.0) / 2.0
    for _ in range(60):
        c, d = b - g * (b - a), a + g * (b - a)
        if dist(c) < dist(d):
            b = d
        else:
            a = c
    return 2e6 / (a + b)


def corner(x, y):
    a = x / math.sqrt(1 + x * x) * math.atan(y / math.sqrt(1 + x * x))
    b = y / math.sqrt(1 + y * y) * math.atan(x / math.sqrt(1 + y * y))
    return (a + b) / (2.0 * math.pi)


def area(src):
    if src[0] == "disc":
        return math.pi * src[1] * src[1] / 4.0
    return src[1] * src[2]


def illum(src, d):
    if src[0] == "disc":
        r = src[1] / 2.0
        return math.pi * r * r / (r * r + d * d)
    return 4.0 * math.pi * corner(src[1] / 2.0 / d, src[2] / 2.0 / d)


def fill_distance(src, target):
    lo, hi = 0.05, 30.0
    if illum(src, lo) < target:
        return None
    for _ in range(100):
        mid = 0.5 * (lo + hi)
        if illum(src, mid) > target:
            lo = mid
        else:
            hi = mid
    return lo


SETS = (("A headshot", ("disc", 1.2), 1.2, ("disc", 1.2), 3, 1.5,
         5600, 5600),
        ("B tabletop", ("rect", 0.3, 1.2), 0.6, ("rect", 0.6, 0.6), 4, 1.0,
         5600, 5600),
        ("C interview", ("rect", 0.9, 1.2), 1.5, ("disc", 0.6), 2, 2.0,
         5600, 3200))

if __name__ == "__main__":
    for name, key, dk, fill, r, b, tk, tf in SETS:
        ek = illum(key, dk)
        df = fill_distance(fill, ek / (r - 1))
        w = (r - 1) / r
        lit = [w * p + (1 - w) * q
               for p, q in zip(planck_xyz(tk), planck_xyz(tf))]
        print("set {}: key {} at {:.2f} m, fill {}".format(
            name, key[0], dk, fill[0]))
        print("  ratio {}:1 = {:.2f} stops; fill at {:.2f} m (inv-sq {:.2f})"
              .format(r, math.log2(r), df,
                      dk * math.sqrt((r - 1) * area(fill) / area(key))))
        print("  background +{:.1f} m: {:.2f} stops under the subject".format(
            b, math.log2(ek / illum(key, dk + b))))
        cl = cct(lit)
        print("  lit side {:.0f} K, shadow {:.0f} K, gap {:.1f} mired".format(
            cl, tf, 1e6 / tf - 1e6 / cl))

Single source and citation

Fan, Y. (2026). Inverse-Square Lighting and Area-Source Falloff in the Studio: Mixed Colour Temperatures and the Algebra of Lighting Ratios (Version 1.0.0), Chapter 8: Closing the Loop: StudioTaiwan Lighting Cards, the Lighting Ratio Calculator and a Pre-Registered Test. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-325 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026325,
  author    = {Fan, Yafu},
  title     = {Inverse-Square Lighting and Area-Source Falloff in the Studio: Mixed Colour Temperatures and the Algebra of Lighting Ratios},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book