What does Enamel Remineralisation and the Oral Nitrate Pathway conclude, in numbers, about “Diffusion in Enamel Micropores: the Square-Root Law, Pore Clogging and Molecular Sieving”?

Answer: Chapter 4 gives the square-root law of diffusion (half-concentration depth 0.9539√(Dt)), shows that surface sealing stops mineral gain at 11.22, and finds that a 20 nm particle, even in wide pores, has only 0.01617 of the overall mobility of calcium.

Scope of the numbers: Its parameters are illustrative; all calculations are generated by its programs; the book is not medical or dental advice and claims no health effect for any product or practice. Chapter 2 shows that the critical pH is not a constant but a function of calcium and phosphate, running from 5.12 to 6.07 across an illustrative grid, with a slope of −0.722 against log calcium.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 11.22, 20

solver vs erfc at 0.25 day, x <= 100 um: max error 0.0014
casedaysurface epsouter 20 um sharehalf-gain umgain um
open70.3000.291421.38
open300.3000.286426.05
open900.3000.2854218.22
open1800.3000.2854236.48
clogging70.2770.297401.35
clogging300.2000.310365.38
clogging900.0000.3591811.22
clogging1800.0000.3591811.22

Key formula

\[\frac{C(x,t)}{C_0} = \operatorname{erfc}\!\left(\frac{x}{2\sqrt{Dt}}\right)\]
Show the full program
# Chapter 4. p42: reaction-diffusion with pore clogging (surface arrest)
# Ions enter a 200 um lesion from the surface (C = 1 at x = 0, no flux
# at the back) and precipitate on the crystal surfaces at a rate k C,
# which removes solute (factor q) and fills pores: d eps/dt = -k C.
# Transport slows as pores fill, D = D0 (eps / eps0)^2, and a node
# stops gaining once its pores are full. Backward Euler in time,
# Thomas algorithm in space. Step 1 checks the solver against the
# erfc solution of p41 with k = 0. Step 2 compares a lesion whose
# pores clog with one whose pores are held open. Illustrative
# parameters: D0 = 1e-13 m2/s (8640 um2/day), eps0 = 0.3, k = 1/300
# per day, q = 720, dx = 2 um, dt = 0.02 day (0.0025 for the check).
import math

L, N = 200.0, 101
DX = L / (N - 1)
D0, EPS0, K, Q = 8640.0, 0.3, 1.0 / 300.0, 720.0


def thomas(a, b, c, d):
    n = len(d)
    cp, dp = [0.0] * n, [0.0] * n
    cp[0], dp[0] = c[0] / b[0], d[0] / b[0]
    for i in range(1, n):
        m = b[i] - a[i] * cp[i - 1]
        cp[i] = c[i] / m if i < n - 1 else 0.0
        dp[i] = (d[i] - a[i] * dp[i - 1]) / m
    x = [0.0] * n
    x[-1] = dp[-1]
    for i in range(n - 2, -1, -1):
        x[i] = dp[i] - cp[i] * x[i + 1]
    return x


def step(c, eps, k, clog, dt=0.02):
    dd = [D0 * (e / EPS0) ** 2 for e in eps]
    a, b, cc, d = [0.0] * N, [1.0] * N, [0.0] * N, list(c)
    d[0] = 1.0
    for i in range(1, N):
        dl = 2 * dd[i] * dd[i - 1] / (dd[i] + dd[i - 1])
        dr = 0.0
        if i < N - 1:
            dr = 2 * dd[i] * dd[i + 1] / (dd[i] + dd[i + 1])
        rl, rr = dt * dl / DX ** 2, dt * dr / DX ** 2
        a[i], cc[i] = -rl, -rr
        b[i] = 1 + rl + rr + dt * Q * k
    c = thomas(a, b, cc, d)
    gain = [dt * k * c[i] for i in range(N)]
    if clog:
        gain = [min(gain[i], eps[i] - 1e-4) for i in range(N)]
        eps = [eps[i] - gain[i] for i in range(N)]
    return c, eps, gain


def run(days, clog, report):
    c, eps, mineral = [0.0] * N, [EPS0] * N, [0.0] * N
    c[0] = 1.0
    out = []
    for n in range(1, int(round(days / 0.02)) + 1):
        c, eps, g = step(c, eps, K, clog)
        mineral = [mineral[i] + g[i] for i in range(N)]
        t = n * 0.02
        if any(abs(t - r) < 1e-9 for r in report):
            tot = math.fsum(mineral)
            outer = math.fsum(mineral[:10]) / tot
            peak = max(mineral)
            ip = mineral.index(peak)
            j = ip
            while j < N - 1 and mineral[j] > 0.5 * peak:
                j += 1
            out.append((t, eps[0], outer, j * DX, tot * DX))
    return out


if __name__ == "__main__":
    c, eps = [0.0] * N, [EPS0] * N
    c[0] = 1.0
    for _ in range(100):
        c, eps, _g = step(c, eps, 0.0, False, 0.0025)
    s = math.sqrt(D0 * 0.25)
    err = max(abs(c[i] - math.erfc(i * DX / (2 * s))) for i in range(51))
    print("solver vs erfc at 0.25 day, x <= 100 um: max error {:.4f}"
          .format(err))
    print("case       day   surface eps   outer 20 um share"
          "   half-gain um  gain um")
    for clog, name in ((False, "open"), (True, "clogging")):
        for row in run(180.0, clog, (7.0, 30.0, 90.0, 180.0)):
            print("{:9} {:5.0f}   {:10.3f}   {:16.3f}   {:12.0f}  {:6.2f}"
                  .format(name, row[0], row[1], row[2], row[3], row[4]))

Single source and citation

Fan, Y. (2026). Solubility-Product Nucleation of Nano-Hydroxyapatite, Enamel Micropore Diffusion and the Oral Commensal Nitrate-Reduction Pathway (Version 1.0.0), Chapter 4: Diffusion in Enamel Micropores: the Square-Root Law, Pore Clogging and Molecular Sieving. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-165 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026165,
  author    = {Fan, Yafu},
  title     = {Solubility-Product Nucleation of Nano-Hydroxyapatite, Enamel Micropore Diffusion and the Oral Commensal Nitrate-Reduction Pathway},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book